Search

[Display omitted] • Building policies must be rooted in a good understanding of the targeted population. • Building performance standards may benefit from creating databases of weather files. • A thermal performance analysis should consider multiple key performance indicators. • Building performance policies should address the thermal resilience of buildings. This paper presents the main challenges faced and lessons learned when developing a new method to assess the thermal performance of residential buildings for the recently updated Brazilian building performance standard, NBR 15575–1:2021. It touches on subjects related to the representation of occupant behavior, climate, and thermal acceptability in building performance simulation, as well as the use of reference models, key performance indicators, and performance levels in policies. NBR 15575 provides a thorough procedure to analyze thermal performance, allowing buildings to be assessed while in passive operation mode and also accounting for energy needs when active operation is necessary. Multiple key performance indicators are introduced to provide a comprehensive evaluation. The main difficulty found was dealing with diversity. Given the vast scale of Brazil's territory, a high variation in culture, climate and construction techniques is expected, thus requiring a compromise between detail and scalability. There are still many opportunities for improvement, especially regarding the representation of occupants, and adjustments of the characteristics of reference models to promote high thermal performance, considering the diverse climates, regional practices, and economic needs. This paper might help researchers and other stakeholders to develop and improve other local standards and protocols, especially for warm climates. [ABSTRACT FROM AUTHOR]

Abstract: This paper reports the use of an internationally recognized validation and diagnostics procedure to test the fidelity of a simplified calculation method. The case study is the simplified model for calculation of energy performance of building envelopes, introduced by the Brazilian regulation for energy efficiency in commercial buildings. The first step of the assessment consisted on evaluating the simplified model results using the BESTEST. This paper presents a straightforward approach to apply the BESTEST in other climates than the original one (Denver, USA). The second step of the assessment consisted on applying the simplified model to evaluate four building typologies, and compare the results with those obtained using a state of the art building energy simulation (BES) program. For some BESTEST cases, the simplified model presented results inside of a confidence interval calculated by the authors. However, the simplified model was found to yield significant difference in the four building typologies analysed. Moreover, in all four building typologies analysed, the simplified model led to a lower energy efficiency label when compared to the label obtained using BES. The paper concludes that the simplified model may require improvements to properly indicate the actual energy performance of commercial building envelopes. [Copyright &y& Elsevier]

• A top-down analysis of the non-residential building stock in Brazil is proposed. • The share of each building typology in the country energy consumption was assessed. • A statistical analysis showed variation of EUI according to type of building and region. • Reference values for the commercial building stock in Brazil is provided. This paper provides a pioneering, top-down analysis of the non-residential building stock in Brazil. A country-wide dataset was used, comprising 10,000 buildings divided into 12 typologies. Key indicators include floor area, energy use intensity, and operation patterns. In addition, predominant wall constructions, lighting systems, equipment, water heating, and HVAC systems for each typology were identified, including average density power for the systems. Data from the Brazilian Energy Balance report was correlated with the sample of buildings to determine the proportion of each building typology in the total energy consumption of the country, considering different energy sources. This study provides an innovative and up-to-date status of the characteristics of non-residential buildings in Brazil. A complementary statistical analysis addressed the correlation between energy use intensity and the building characteristics including an ANOVA test and a regression analysis in order to investigate the influence of the energy usage indicators (Lighting Power Density, Equipment Power Density, Cooling capacity) on the energy use intensity of each building typology in Brazil. This study is intended to serve as a reference for building characteristics and building energy performance in Brazil, and hence support diverse research regarding country-level building stock modeling, energy benchmarking, climate change impacts, and energy-efficiency related studies. [ABSTRACT FROM AUTHOR]

The proposition of Net Plus-energy Buildings (NPEB) leads to the need to carry out studies of load matching in contrast with the grid impacts of distributed generation (DG). This paper performs simulations with the EnergyPlus software tool concerning a NPEB operating in four Brazilian metropolitan areas. The analyses include photovoltaic (PV) performance parameters and Load Matching and Grid Interaction indicators (LMGI). New grid impact indicators are defined in order to study the impacts of DG in the power grid. In the second stage, the work investigates economic aspects under net metering supporting. Results show the annual amount of electrical demand covered by PV varies from 29 to 51% with more potential in situations with higher PV production and higher cooling load, and the annual PV electricity that supplies the loads varies from 24 to 36% according to the seasonal variations of PV-load correlation. The levels of exported electricity into the grid are high in Brazil with annual mean power peaks surrounding 0.7 but can surpass 0.8 in the sunniest periods. The economy demonstrates the building achieves grid parity from 6 to 18% discount rates and the payback time is given for different scenarios of investment costs, discount rates and electricity tariffs. [ABSTRACT FROM AUTHOR]

• An overall panorama of the school buildings in Brazil was presented. • Energy billed data and survey evidence were used to build a statistical stock model. • The Weibull distribution was the most adequate to represent the continuous variables. • kWh/student·year was more suitable than kWh/m2·year to model Brazilian school buildings stock. • Thermal performance is an issue to be greatly improved in schools in Brazil. Understanding the actual conditions in school buildings regarding energy usage and environmental satisfaction gives way to the development of consistent building stock modelling. In the Brazilian context, a deep-rooted inefficient structure of energy management implies a lack of mapping the actual conditions of the public schools. Therefore, this paper aimed to assess the actual energy performance of school buildings in Brazil. This paper innovates by integrating questionnaire responses and billed energy data to allow the construction of an evidence-based stock model through a statistical approach, which was never performed for the Brazilian building stock. Moreover, the association of energy use intensity (EUI) with the core aspects of building characteristics, occupancy, environmental satisfaction and necessary improvements mapped the relevance of such aspects in energy usage patterns. Additionally, a discussion of the EUI indicators was addressed. Results showed an unprecedented broad panorama of the school building stock in Brazil and its main features. In terms of statistical analysis, the Weibull distribution was appropriate for representing the continuous variables of the stock. The EUI as a function of the number of students was more suitable than the floor-plan area to achieve a reliable energy performance analysis. Several tests were performed to assess if the energy management, environmental satisfaction and maintenance practices impacted the EUI or not. Finally, the main conclusion was that the stock model obtained was simple and fit the energy management structure in the Brazilian scenario. [ABSTRACT FROM AUTHOR]