Search

• Overheating regulations and calculation methods in 26 European countries were compared. • Most of the existing calculation methods are outdated and do not fit climate-proof buildings. • France requires a mixed-mode operation of naturally ventilated households. • The UK developed a heatwave-based calculation approach. • Comfort-based, multi-zonal, and time-integrated calculation approaches are needed. With the ongoing significance of overheating calculations in the residential building sector, building codes such as the European Energy Performance of Building Directive (EPBD) are essential for harmonizing the indicators and performance thresholds. This paper investigates Europe's overheating calculation methods, indicators, and thresholds and evaluates their ability to address climate change and heat events. e study aims to identify the suitability of existing overheating calculation methods and propose recommendations for the EPBD. The study results provide a cross-sectional overview of twenty-six European countries. The most influential overheating calculation criteria are listed the best approaches are ranked. The paper provides a thorough comparative assessment and recommendations to align current calculations with climate-sensitive metrics. The results suggest a framework and key performance indicators that are comfort-based, multi-zonal, and time-integrated to calculate overheating and modify the EU's next building energy efficiency regulations. The results can help policymakers and building professionals to develop the next overheating calculation framework and approach for the future development of climate-proof and resilient residential buildings. [ABSTRACT FROM AUTHOR]

[Display omitted] • nZEBs in Eastern Europe lack carbon neutrality metrics and targets. • Performance requirements for nZEBs in Eastern Europe are presented. • Eastern Europe needs strategy and local governance for nZEB market penetration. • EPCs require major reform, and effective monitoring of nZEB performance is needed. • The cost-optimality calculation method must be adopted to ensure cost-effective market uptake. The European Unions' ambition for the construction sector is to be carbon neutral by 2030 for new construction. Since 2021, all new buildings in the EU should have been constructed as nearly zero-energy buildings (nZEB). However, Eastern European countries struggle to implement the 2018 Energy Performance of Building Directive recast requirements. Next to the economic challenges, equally essential factors hinder renovating the existing residential building stock and adding newly constructed high-performance buildings sourced primarily from renewable energy sources. Therefore, this study provides a cross-study to identify the barriers to nZEB implementation in ten Eastern European countries, including Bulgaria, Croatia, Czechia, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, and Slovakia. The study was conducted between 2019 and 2021 and provides an overview of prospects for nZEB in Eastern Europe. The study examines the challenges of nZEB plans faced in those countries and provides constructive recommendations. The regulations and definitions regarding nZEB energy performance, cooling and heating energy demand, thermal comfort, onsite renewables, and construction quality were analyzed. Results show that most Eastern European countries are unprepared to comply with the EPBD guidelines and cost-optimality approach. The paper ranks each country and recommends specific measures to refine the nZEB definitions. The paper provides a thorough comparative assessment and benchmarking of select EU geography that can help shift the identified gaps into opportunities for the future development of climate-neutral high-performance buildings. [ABSTRACT FROM AUTHOR]

• Implementation of a model predictive control scheme for HVAC systems is presented. • The hardware/software solution is generalisable to most building management systems. • Cloud solutions can offer low-cost, scalable control in commercial buildings. • Economic MPC reduced energy usage by 1.7% compared to baseline control. • Building thermal performance strongly affects viability of MPC schemes. Many businesses are looking for ways to improve the energy and carbon usage of their buildings, particularly through enhanced data collection and control schemes. In this context, this paper presents a case study of a food-retail building in the UK, detailing the design, installation and cost of a generalisable model predictive control (MPC) framework for its Heating, Ventilation and Air Conditioning (HVAC) system. The hardware/software solution to collect relevant data, as well as the formulation of the MPC scheme, is presented. By utilising cloud-based microservices, this approach can be applied to all modern building management systems with little upfront capital, and an ongoing monthly cost as low as $6.39/month. The MPC scheme calculates the optimal temperature setpoint required for each Air-Handling Unit (AHU) to minimise its overall cost or carbon usage, while ensuring thermal comfort of occupants. Its performance is then compared to the existing legacy controller using a simulation of the building's thermal behaviour. When simulated across two months the MPC approach performed better and achieved the same thermal comfort for a lower overall cost. The economic optimisation resulted in an energy saving of 650 kWh, with an associated cost savings of $240 (an improvement of 1.7% compared to the baseline), while the carbon optimisation gave negligible CO 2 savings due to the inability of the building to shift heating to low-carbon periods. Findings from this study indicate the potential for improving building performance via MPC strategies, however the level of impact will depend on specific building attributes. [ABSTRACT FROM AUTHOR]

Typically the effect of thermal bridges on the energy performance of buildings is taken into account by implementing an average U-value in 1D whole building energy simulation program, which is referred to as the equivalent U-value method. This treatment accounts for the effect of thermal bridges on the overall thermal transmittance of envelope details, while their thermal inertia effect is ignored. In this paper, the dynamic effect of balcony slab as thermal bridges on the energy performance of a high-rise residential building is investigated by comparing the annual space conditioning loads obtained by the equivalent U-value method to that obtained from 3D dynamic modeling of the balcony junctions implemented in WUFI Plus program. The simulation results show that the equivalent U-value method underestimates the annual heating loads by 2.8–4.4% for the building as-designed. With the increase of balcony portion and better insulated walls, the difference in annual space heating loads modeled using these two methods is increased to 8.6–15.2%. With the implementation of balcony thermal break the annual heating loads are reduced by 8.8–25.7% and the difference between these two modeling methods is also reduced to 1.9–11.5% for the cases investigated. [ABSTRACT FROM AUTHOR]

Abstract: Building performance simulation (BPS) has the potential to provide relevant design information by indicating directions for design solutions. A major challenge in simulation tools is how to deal with difficulties through large variety of parameters and complexity of factors such as non-linearity, discreteness, and uncertainty. The purpose of uncertainty and sensitivity analysis can be described as identifying uncertainties in input and output of a system or simulation tool . In practice uncertainty and sensitivity analysis have many additional benefits including: (1) With the help of parameter screening it enables the simplification of a model . (2) It allows the analysis of the robustness of a model . (3) It makes aware of unexpected sensitivities that may lead to errors and/or wrong specifications (quality assurance) . (4) By changing the input of the parameters and showing the effect on the outcome of a model, it provides a “what-if analysis” (decision support). . In this paper a case study is performed based on an office building with respect to various building performance parameters. Uncertainty analysis (UA) is carried out and implications for the results considering energy consumption and thermal comfort are demonstrated and elaborated. The added value and usefulness of the integration of UA in BPS is shown. [Copyright &y& Elsevier]

Abstract: This paper presents the results of a recent research effort to collect and analyze data pertaining to traditional bath buildings (“hammams”) in Egypt, Turkey, Morocco, Syria, and Algeria. Thereby, the energy performance of and the thermal comfort conditions in five such buildings were studied. Moreover, empirically calibrated building performance simulation models of a number of objects were generated in order to predict the consequences of alternative thermal retrofit measures. The results provide the opportunity for an objective assessment of the actual energy and indoor environmental performance of these buildings. [Copyright &y& Elsevier]

• The parameters related to NV performance are identified and optimized. • Activation threshold temperature is not the key parameter for NV performance. • A general NV saves up to 82.5% energy but may cause overcooling penalty. • NV optimization improves thermal comfort and further saves up to 38.6% energy. • Optimization of natural NV improves the thermal comfort although it consumes more energy. The rising cooling demand and overheating in the building sector, especially in office buildings, have intensified research interest in recent years. Night ventilation (NV) as a passive energy technology has shown a great potential cooling energy and ameliorate indoor thermal environment. In this paper, a holistic approach involving global sensitivity analysis and evolutionary optimization is developed to exclude insignificant parameters and explore optimal NV performance in terms of energy use and thermal comfort. The proposed approach is based on the simulation research of a three-story office building equipped with daytime air conditioning and NV system in a cold climate region. The NV system is equipped with three levels of specific fan power (SFP), representing cases with natural NV and medium and high SFP mechanical NV, respectively. The results show that the activation threshold temperature is not the key parameter for NV performance. Comparing with the case without NV, the three SFP NV systems under a general scheme save 8.8% to 82.5% total cooling energy consumption (TCEC), but increase the average percentage of dissatisfied during occupied hours (aPPD) from 7.5% to about 15%, which may cause overcooling penalty. The optimization decreases the thermal mass area and the night air change rate setpoint at each hour, while increases the minimum indoor air temperature setpoint compared to the general scheme. All three optimal NV schemes significantly improve the indoor thermal comfort by maintaining the aPPD at 7.5%. The optimal medium and high SFP mechanical NV scheme further save 7.1% and 38.6% TCEC compared to the corresponding general mechanical NV scheme, respectively. With a higher SFP, a greater energy saving potential is contributed through NV optimization process. Even though the optimal natural NV scheme consumes more than twice as much TCEC as the general natural NV scheme, it is still worth optimizing the natural NV since the indoor thermal comfort can be improved and the optimal scheme still saves much cooling energy compared to the base case. [ABSTRACT FROM AUTHOR]