Search

[Display omitted] • Carbon emissions are explored in China's building operations from provincial perspective. • GDIM is employed to factorize ten affecting factors of CO 2 emissions in building sub-sectors. • CO 2 emissions of building sub-sectors are predicted with dynamic simulation. • The contribution of provinces to the change and peak of national emissions are discussed. Carbon emissions from building operations have a critical impact on achieving carbon peaking goal in China. However, the provincial emission performance in building operations are quite different and it is still unidentified how they affect the national emission change and peaking target, making national emission reduction target hard to implement at the provincial level. This paper explores the driving factors leading to emission changes and examines the prospective emission peaks in China and China's provinces by adopting generalized Divisia index method (GDIM) and the combination of scenario analysis and Monte Carlo simulation. Furthermore, the regional emission heterogeneity and the contribution of provinces to the change and peak of national emissions are discussed to identify regions and provinces that should be focused on emission monitoring. Results show that in China and most Chinese provinces, energy consumption of commercial buildings, energy consumption and floor space of urban residential buildings besides income improvement, and the per capita CO 2 emissions of rural residential buildings contributed greatly to emission growth. Under current policies, commercial and urban residential buildings in most provinces would fail to reach their emission peaks ahead of schedule. The urban residential buildings in the northern region, commercial and rural residential buildings in the eastern region caused higher CO 2 emissions. At the provincial level, Shandong, Shanxi and Hebei made the top contribution to total emissions of commercial, urban residential and rural residential buildings, respectively. Shandong and the provinces in north China of urban residential buildings and four provinces including Shandong, Guangdong, Hebei and Zhejiang of commercial and rural residential buildings had the significant impact on the uncertainty of the peaking time of CO 2 emissions. These findings provide a strong decision-making reference for Chinese government to formulate targeted regional emission reduction policies in building operations. [ABSTRACT FROM AUTHOR]

• A new urban building energy modeling tool-AutoBPS was developed. • AutoBPS calculated urban building energy demands, analyzed energy retrofit and rooftop PV potential via EnergyPlus. • AutoBPS automatically generated multi-zone models, considering shading from surrounding buildings. • A downtown district of 3633 buildings in Changsha, China, was simulated to demonstrate the tool's features. • All three energy conservation measures and PV installation could save 38.6% of total energy demand. China has promised to peak carbon emissions by 2030 and become carbon neutral before 2060. Achieving this target requires actions from all sectors, especially the building sector, which accounts for 33 % of the total energy consumption in China. Within this scenario, this paper introduces a new urban building energy modeling tool, Automated Building Performance Simulation (AutoBPS), to calculate urban building energy demands and to analyze energy retrofit and rooftop photovoltaic (PV) potential. AutoBPS uses a building-by-building approach to automatically generate multi-zone (one zone per floor) models based on the city building dataset, considering the shading effect by surrounding buildings. The tool simulates building energy use and PV generation via EnergyPlus. A downtown district of 3633 buildings in Changsha, China, was selected as a case study to demonstrate the features of the tool. Firstly, annual baseline energy uses of 1793 GWh were simulated by inputting Geographic Information System (GIS) data. Then, different energy conservation measures (covering envelope, lighting, cooling system upgrade, etc.) and roof PV generation systems were adopted to explore energy saving potential. The results showed that the window upgrade was the most energy-efficient individual measure for residential buildings, while the lighting upgrade was that one for commercial buildings. Altogether three measures could save 2.7 ∼ 30.7 % of annual site energy use intensity per building. The total energy demand could be reduced by 18.5 % by combining all measures and saved by 38.6 % when PV installation was added. AutoBPS can be easily applied to other cities, supporting urban energy efficiency plans for carbon reduction goal implementation. [ABSTRACT FROM AUTHOR]

• POE was carried out to compare the design target and operational effect after use. • A Large Irregular Green Commercial Building was chosen for in-depth analysis. • We recommend the building energy saving and carbon emission reduction strategy. Commercial buildings, especially large irregular commercial buildings with complex space and dense occupation, have high energy consumption and carbon emissions. Moreover, the actual operating performance differs significantly from its design, in terms of energy conservation and carbon emissions. This study selected an irregular large-scale green commercial building in Dalian, a coastal city in the cold zone of China. The running energy consumption and indoor physical environment were investigated and analyzed, and a satisfaction survey was conducted using the Post-occupancy evaluation (POE) methods. The promotion strategies of holistic design were proposed by comparing the operational building performance with the design target. The research shows that the energy consumption of the building was 68.02 kWh/m2, which failed to meet the standard requirements. The carbon emission was 74.76 kgCO 2 /m2. Less than 10 % of humidity in summer fell in the expected range, and the lowest value of PM 2.5 concentration in winter was 28.3 %. The score of indoor environmental quality and service satisfaction was low. This paper identifies the problems and analyzes the differences between the operation stage and design phase. It provides recommendations and guidelines for optimizing the carbon emission and indoor environment based on the performance improvement of building operational conditions. [ABSTRACT FROM AUTHOR]

Abstract: This paper takes a close look at the China national standard GB50189-2005, Design Standard for Energy Efficiency of Public Buildings, which was enforced on July 1, 2005. The paper first reviews the standard, then compares the standard with ASHRAE Standard 90.1-2004 to identify discrepancies in code coverage and stringency, and recommends some energy conservation measures that can be evaluated in the design of public buildings to achieve energy savings beyond the standard. The paper also highlights several important features of 90.1-2004 that may be considered as additions to the GB50189-2005 standard during the next revision. At the end the paper summarizes the latest developments in building energy standards and rating systems in China and the US. [Copyright &y& Elsevier]

A large part of energy consumption in homes, offices and commercial spaces is related to Heating, Ventilation and Air-conditioning (HVAC) devices. The effective parameter on the consumption of HVAC systems is internal heat gains that arise from occupants, electric equipment and lighting. In order to reduce the energy consumption of these systems, internal heat gains should be predicted accurately. Since there are few investigations performed on the prediction of internal heat gains, in this paper, three predictive models, namely multiple regression model, Levenberg–Marquardt back-propagation (LM-BP) model and similar days method based on combined weights, have been deployed. By assessing the influential factors on internal heat gains, fundamental theories, structures, equations and parameters of these models are thoroughly proposed. To examine the prediction techniques, an office building in China was considered. It was found that all the proposed models have high accuracy; however, the LM-BP neural network showed the most precision among other models with RMSE = 15.59, MAE = 10.16 and MAPE = 6.35. This model had a higher agreement with the actual internal heat gains compared to the predetermined working programs in the ASHRAE standard 90.1. The proposed models used in this study can lead to providing a theoretical base for scholars and engineers to improve the predictive control of HVAC systems, which plays an important role in enhancing thermal comfort, saving energy of residential buildings. [ABSTRACT FROM AUTHOR]

• The degree of influence of residential cluster layout factors on building heating energy consumption levels in cold regions of China. • Provides an idea of residential layout optimization and design based on the energy saving objectives of residential clusters, translating quantitative indicators such as wind environment into residential layout form design problems. • Energy simulation-based residential planning and layout design method is used to quantify the relationship between residential cluster design factors and energy efficiency in Jinan, resulting in optimal design parameters for residential planning factors in Jinan. • The study of building heating energy consumption in a city in a cold region of China, with a methodology that can be used in countries or cities with similar climate characteristics. Residential heating energy consumption in China accounts for about 34% of the total building operation energy consumption in the country. The layout pattern of residential clusters is one of the most critical factors affecting building heating energy consumption, yet few scholars have studied the layout of residential clusters in a quantitative way. This paper takes Jinan, a typical city in cold region IIB of China, as an example, to quantify and analyse the residential layout parameters related to heating energy consumption: group layout, building orientation and building spacing; ECOTECT and HTB2 are used to model and simulate the energy consumption of the three types of layout residential groups selected for the study, and the relationship between residential group layout parameters and residential heating energy consumption is analysed based on multiple linear regression analysis. The relationship between residential group layout parameters and residential heating energy consumption was analysed based on multiple linear regression analysis. The study shows that, on the premise of ensuring the same building density, the group layout has the greatest influence on the building energy consumption, and the courtyard layout has lower heating energy consumption compared to the row and staggered layout; on this basis, the influence of building orientation and building spacing on heating energy consumption is discussed. The study shows that increasing the spacing between buildings to meet the daylight spacing will reduce energy consumption by 4% and that a 15° shift to the west will reduce energy consumption by 5%. This result confirms the importance of cluster layout in terms of heating energy consumption and urban energy efficiency in cities in cold regions. [ABSTRACT FROM AUTHOR]

Abstract: Energy consumption is an important issue in China. In heating, ventilation and air conditioning (HVAC) systems, more and more commercial buildings use air-to-air heat recovery ventilators as energy saving units for recovering heat from the exhaust air in ventilation systems in current years. In the present paper, critical temperatures of air-to-air heat recovery systems for supermarkets in winter are recommended and discussed for the four cities in different climate zones of China. The analysis shows that the temperature of fresh air in winter can be categorized into three regions, i.e., recovery region, transition region and impermissible recovery region. The results also indicate that the latent heat recovery is not suitable for ventilation energy savings in supermarkets in winter. Meanwhile, the applicability of sensible heat recovery in supermarkets depends on outdoor climate and fresh air flow rate. If a variable rotational speed fan is used to introduce fresh air into the building, heat recovery does always function as planned in winter for all the selected cities except Guangzhou, and most values of the COP are much higher than 2.5. Otherwise, there is the risk of negative impact on building energy savings in all cities except Harbin. [ABSTRACT FROM AUTHOR]

• We selected three benchmarking methods to establish building energy benchmarking models based on a sample of 45 hotel buildings in China. • We compared the three benchmarking methods in terms of consistency, robustness and explanatory ability. • The energy efficiency performance obtained from the three methods were found to be inconsistent. • We came up with suggestions based on comparative analysis for policy-makers to develop building energy benchmarking programs. A reasonable building energy efficiency benchmarking program plays an important role in energy consumption control and supervision. Previous studies have focused on the process of establishing a single benchmarking method, but few have compared the performances and outcomes of different methods. To fill this gap, this paper selects three benchmarking methods—multiple linear regression (MLR) based on Energy Star, stochastic frontier analysis (SFA) and the descriptive statistics method (DSM) based on the national energy consumption standard in China—to develop benchmarking models. We demonstrate each method using data on the energy and building characteristics of 45 four- and five-star hotel buildings located in Chongqing, China. To compare the consistency, robustness and explanatory ability of the three methods, we first utilize the Spearman rank correlation analysis to test whether these methods have consistent energy efficiency ranks and then present Sankey diagrams to further reveal the interactions of the estimated energy efficiency grades obtained from the three methods. It is found that the results of DSM and SFA are most consistent, while MLR vs. SFA and MLR vs. DSM present significant differences in evaluating building energy performance. In addition, DSM is more robust for evaluating the ranks of sampled buildings, while SFA is more robust for evaluating energy efficiency grades. Furthermore, we discuss the explanatory ability of each method. In addition to the building characteristics, the design and operational characteristics of the HVAC system have great effects on building energy consumption. Finally, we present suggestions for policy-makers regarding the development and implementation of the building energy benchmarking program in Chongqing and for the management of buildings with different energy performances to further improve the energy efficiency. [ABSTRACT FROM AUTHOR]