Search

Highlights • The energy performance of all variable-speed packaged units needs to be evaluated. • Field test and simulation are combined in the performance evaluation. • The evaluated unit has > 30% higher cooling efficiency than most units in the field. • All variable-speed units can save 22%−29% electricity than the code requirement. Abstract Packaged air-conditioning units are widely used in commercial buildings. Most packaged units in the field are equipped with constant-speed supply fans and constant-speed compressors. Many efforts have been made to increase the operational efficiency of packaged air conditioners by retrofitting existing units with improved controls or developing innovative products with advanced designs. This paper evaluates the energy performance of a packaged unit with all variable-speed components, including the supply fan, the compressor, and the condenser fan. Both a field test and energy simulation are used to quantify the potential of energy savings from the variable-speed unit (VSU) against reference units. In the field test, the reference is a six-year-old existing unit. It was determined through monitoring for one year that the VSU had a 31% higher cooling efficiency than the reference unit. In the simulation, a retail building model was used to compare the performance between the VSU and two reference units—one representing existing units in the field and the other representing units meeting the latest energy code requirements by ASHRAE Standard 90.1. Simulation results showed that depending on the climate, the VSU can save electricity consumption (including both cooling and fan) by 45%–54% relative to the first reference and by 22%–29% relative to the second reference. These findings are valuable for building designers and contractors in selecting packaged rooftop units for both new constructions and retrofits. [ABSTRACT FROM AUTHOR]

This paper investigates application potential of the maisotsenko cycle (M-Cycle) evaporative air coolers in air conditioning systems in moderate climate (Poland is used as an example). Cross-flow M-Cycle heat and mass exchanger (HMX) was chosen as the most representative unit for this type of application. Analysis is based on the computer simulations performed during the peak day in summer (day when the highest cooling loads occur) and assumptions used in Polish standards for air conditioning systems. The obtained results show that evaporative cooling through Maisotsenko cycle has high application potential and allows to generate significant energy savings in compare to the systems equipped with standard heat recovery devices. The most favorable application for the M-Cycle in moderate climate is displacement ventilation, where proposed unit is able to cover almost all energy required by the air conditioning system. [ABSTRACT FROM AUTHOR]

Most current building thermal codes impose upper limits to the predicted annual building energy demand for heating, ventilation and air conditioning. In the building design phase these predictions are obtained using thermal simulations with variable complexity. The simplest approach uses a single lumped thermal capacitance to model the high thermal mass building elements, combined with five thermal resistances (known as the 5R1C model proposed in EN ISO 13790 standard). This model is used by many European countries as the reference simplified methodology to assess overheating risk and calculate yearly building energy demand. This paper presents a successful extension of this model that allows for its application to the prediction of the internal air temperature of free-running buildings with double skin façades. The extension consists in an increased number of thermal resistances used to model the double skin façade zone. The extended model is validated using a set of detailed thermal measurements obtained in a free-running double skin test cell. For the case analysed the simplifications used in the RC model do not reduce the overall accuracy: the mean absolute error for room air temperature is approximately 1 °C, the same order of magnitude of more detailed EnergyPlus simulations (1.2 °C). [ABSTRACT FROM AUTHOR]

Most of the state-of-the-art building simulation programs implement models in imperative programming languages. This complicates modeling and excludes the use of certain efficient methods for simulation and optimization. In contrast, equation-based modeling languages declare relations among variables, thereby allowing the use of computer algebra to enable much simpler schematic modeling and to generate efficient code for simulation and optimization. We contrast the two approaches in this paper. We explain how such manipulations support new use cases. In the first of two examples, we couple models of the electrical grid, multiple buildings, HVAC systems and controllers to test a controller that adjusts building room temperatures and PV inverter reactive power to maintain power quality. In the second example, we contrast the computing time for solving an optimal control problem for a room-level model predictive controller with and without symbolic manipulations. Exploiting the equation-based language led to 2200 times faster solution. [ABSTRACT FROM AUTHOR]

Model predictive control (MPC) has been studied in the building science realm for about three decades. However, the following two aspects of the building control have not been studied thoroughly in MPC research. One is the impact of the mixed-mode cooling system on the active heating ventilation and air conditioning (HVAC) energy consumption, and the other is the differences of individual thermal comfort preference and its impact on energy. This paper proposes an occupant-oriented mixed-mode EnergyPlus predictive control system to optimize HVAC energy consumption while meeting the individual thermal comfort preference. A web-based dashboard is implemented in the test-bed building for three months to collect individual thermal comfort preference data. The data analysis results suggest that occupants have various tolerances and preferences about thermal comfort. The simulation results show that, during one week of a typical swing season, the mixed-mode system further reduces the active HVAC energy consumption, and the diversified occupant thermal comfort preference has significant impact on HVAC energy consumption. [ABSTRACT FROM AUTHOR]

In tropical countries such as India, increasing the roof albedo helps to reduce the heat ingress through the roof. This further reduces air-conditioning energy consumption in conditioned buildings and increases comfort in unconditioned buildings. In order to help users determine the benefits of high albedo roofs under varying conditions, a simple calculator has been developed. Parameters such as location, building type, roof area, and surface properties of the roof are taken as inputs. Annual EnergyPlus simulations are performed for the given parameters and the results are displayed in both graphical and tabular formats. It also calculates the simple payback by comparing a given base case roof albedo with the proposed roof albedo. The calculator can perform comfort simulations for unconditioned buildings and simulates measures including a radiant barrier system and under deck roof insulation. The calculator also runs a parametric simulation between insulation thickness and roof albedo to find an optimum roof insulation thickness based on incremental internal rate of return. This paper presents the features of the cool roof calculator and the type of analysis that can be performed using the cached results. [ABSTRACT FROM AUTHOR]

In this paper, measures such as planting urban greenery and using high-albedo paint to mitigate the urban heat-island effect, conserve energy, and reduce CO 2 emissions were assessed. As a typical energy-saving method for buildings, reducing the internal heat sources and increasing the insulation are also assessed. We used a coupled urban canopy and building energy model to predict the heat loads of buildings in city districts, the effects of air-conditioning on energy consumption, and air temperature changes. In this model, a vertical one-dimensional local atmospheric model is coupled with an air-conditioning load calculation model for buildings, making it possible to assess the interaction between anthropogenic heat release due to air-conditioning usage and the outside thermal environment. In this study, we selected a target study region in the city of Kawasaki, Japan. When typical city districts were assessed, planting greenery or increasing albedo achieved temperature reductions of 0.6–1.0 °C and 0.1–0.5 °C, respectively, and energy savings of 40–80 and 70–90 kJ/m 2 /day (per unit floor area) on a typical summer day. The results from the large-scale assessment show that urban greening or albedo increases achieved the highest energy savings, of up to 400 t-CO 2 /day, in the entire target study region. [ABSTRACT FROM AUTHOR]

Solar-ground source heat pump system (SGSHPS) is a new type of high efficiency, energy saving and environmental protection air-conditioning technology. In this paper, experimental studies and numerical simulation on the performance of a SGSHPS operated in different heating modes were carried out. The experimental system was installed in Nanjing of China and solar collectors were coupled with ground heat exchangers (GHE) through an insulated water tank. Four operation modes including ground source heat pump (GSHP), combined operation mode, day and night alternate operation mode and solar U-tube feeding heat alternate operation mode were investigated during winter season. The heat pump performance, solar collecting performance and borehole wall temperature variations were analyzed and compared for various modes. The experimental results indicate that for the combined operation mode, the system operation efficiency during day can be improved by the assistance of solar energy, and the excess solar energy collected during day can be stored in ground by the GHE to improve the operation performance of GSHP during night. The proportions of heat source burdened by solar and geothermal energy are 43.3% and 50.2% respectively. For the alternate operation modes, the temperature resumption of ground surrounding the GHE can be well achieved due to the intermittent heat extraction of GHE or feeding solar heat into ground and thus the overall utilization efficiency of solar and geothermal energy can be improved greatly. During the whole experimental period, the average COPs are 2.37 and 2.72 for GSHP and SAHP operation mode respectively, and the corresponding parameters are 2.69, 2.65 and 2.56 for the combined operation mode, day and night alternate operation mode and solar U-tube feeding heat alternate operation mode, respectively. The average solar collecting efficiency are 43.6%, 47.3% and 38.8% for the combined operation mode, SAHP operation mode and solar U-tube feeding heat operation mode, respectively. Based on the unit modeling, a dynamic simulation program was constructed to investigate the seasonal performance of the SGSHPS operated in different heating modes, the simulation results show that the seasonal average COP are 3.67, 3.64, 3.52 and 3.48 for the combined operation, day and night alternate operation, solar U-tube feeding heat and GSHP mode, respectively. From the view of improving the overall efficiency and increasing heat source fraction of solar energy, the combined operation mode is the best. [ABSTRACT FROM AUTHOR]