Search

Ubiquitous modernization of building energy and management systems brings tendencies for an effective integration of renewables in buildings. This article shows how solar energy can be in charge of energy savings within a building by integration of solar systems with Trombe wall. Numerical calculations of Trombe wall thermal resistance and its performances in comparison with a common wall are considered. Additionally, energy-efficiency gaining by a combination of PV modules and Trombe wall, using simulations by SAM (System Advisor Model) software is discussed. PV module parameters and their impact on its electricity production are observed and analyzed. The PV module parameters, analyzed in the paper are: the tilt angle α of PV modules, incident angle β of direct sunrays on PV modules, normal beam irradiation N and PV cells operating temperature. With bigger incident angle β of direct sunlight on PV modules, the normal beam irradiation is smaller, which brings less electricity production. The impact of PV module operating temperature can be neglected in comparison with the impact of tilt angle on PV module electricity production. The optimal tilt angle of PV modules for generating maximum annual electricity is around latitude angle. It varies with normal beam irradiation to achieve the maximum monthly electricity production. [ABSTRACT FROM AUTHOR]

Large-space buildings have large spatial scale, complicated structures and dense people. Roof systems are key parts of their enclosures. The structural systems of large-space buildings need light materials and reasonable stresses while cover soils suggest load increase and structural bearing capacity adaptability change. In this paper, comprehensive adaptability of the overall cover soil of saddle-shaped shell structures and energy efficiency are simulated and evaluated through Sap2000 software and Design Builder software. The findings are that cover soil greening can greatly save energy for buildings of “saddle-shaped” shell structures and structural thicknesses increase linearly with cover soil load increase, the structures are highly adaptive to cover soil, and it is positively significant to combine large space “saddle-shaped” shell structures with cover soil greening. The integration of the relationship among the “saddle-shaped” shell structure, energy-conserving effect, and cover soil load provides further research basis for the practical application of the overall roof greening of “saddle-shaped” shell structure. [ABSTRACT FROM AUTHOR]

A segmented dynamic dwelling stock model is proven useful for understanding the development and changes of ageing building stocks, which is highly relevant for renovation measures and estimates of energy use and emissions in aggregated building stocks. In this paper, such a model is developed further for detailed analyses of dwelling stock energy demand and exemplified for the Norwegian dwelling stock 1960–2015. The dwelling stock model simulates the development in stock size and composition and is combined with archetype-specific energy intensities to estimate the total energy demand. After calibrating the model results with statistics, the model is used to explore the phenomena and causes of historical changes. A large-scale improvement of the energy efficiency of the Norwegian dwelling stock has taken place through renovation and construction of new dwellings. A historical shift to more efficient energy carriers and heating systems has had an effect on energy savings in the system, of the same size as the effect of the improved energy efficiency of the stock. However, the total average energy savings per m 2 are offset by changes in user heating habits. A significant decrease in average delivered energy intensity per m 2 is only observed after the introduction of heat pumps. [ABSTRACT FROM AUTHOR]

• A new methodology to investigate the impact of thermal mass is defined. • The use of unrepresentative boundary conditions could lead to inaccurate conclusions. • High thermal mass helps to decrease and regulate the internal temperature. • High thermal mass could increase energy use in the summer and winter seasons. • Isolating thermal mass through internal insulation results in better energy performance than external insulation. Contradictory conclusions have been reported on whether thermal mass reduces or increases energy demand in hot and cold climates. A novel approach to measuring the impact of thermal mass on the building's energy consumption is presented. The method aims to better represent reality and applies two different control conditions simultaneously in a numerical model: the first condition, which has been used in past studies, adjusts the internal boundary condition based on the time duration of heating/cooling activation (simulating an occupancy pattern) and the second, which has not been used in past studies, adjusts the internal boundary condition based on both the time duration and the internal temperature (simulating an occupancy pattern and the thermostatic control system). When investigating the impact of thermal mass on the internal temperature in a scenario where no heat is transferred into the building, the high thermal mass outperforms the low thermal mass, showing a time-shifting effect, long time lag, and small decrement factor. However, when modelled using the method presented in this paper, high thermal mass results in greater energy consumption during summer and winter periods in Saudi Arabia. During transition seasons where temperature swings occur on either side of the indoor set-point temperatures, thermal mass reduces thermal transmission. The impact of thermal mass is also investigated for several climatic conditions in Saudi Arabia. Simulation results show that an internally exposed thermal massive wall section results in greater energy consumption when compared to a similar building with isolated thermal mass (i.e. insulated internally). This is due to the fact that even though the internal temperature inside the building is being cooled/warmed up to the set-point, the thermal mass continues to transfer heat that is absorbed by the building's fabric from/to the interior, placing a greater demand on the cooling/heating system. Over the course of a year, however, the impact of thermal mass is negligible when compared to other factors, such as the insulative properties of the building's fabric. [ABSTRACT FROM AUTHOR]