Search

Energy efficiency is one of the main pillars of the European energy strategy and it involves all the economic sectors. The present study proposes an analysis of the energy saving opportunities available in the Italian hotel sector, which has a relevant importance in the national context. The paper introduces a comprehensive model of the Italian hotel sector developed in the LEAP (Long-range Energy Alternatives Planning) environment. The first aim is to estimate the baseline of the consumption, then to evaluate the maximum potential energy saving and, finally, to assess the implementation of a realistic energy efficiency scenario. The paper demonstrates that it may be possible to achieve primary energy savings of 1.6 TWh (13%) in 2030 by implementing financially sustainable energy efficiency measures. [ABSTRACT FROM AUTHOR]

The present paper illustrates the Italian pilot action of the EASEE project (Envelope Approach to improve Sustainability and Energy Efficiency in existing multi-storey multi owner residential buildings), focusing on the analysis of energy refurbishment trends of the Lombardy region residential building stock. More than 60% of the existing building stock in Lombardy region has been built before the 70 s and it is among the main responsible causes of final energy absorption and corresponding CO 2 emissions with a mean primary energy index for heating of about 202.0 kWh/m 2 y. The promotion of renovation measures for such buildings, also through innovative solutions, is becoming increasingly important for both containing the greenhouse gas emissions and supporting the growth of the construction sector. To this topic, the work presents the energy renovation of a residential building in the Province of Milan through the application of innovative prefabricated composite panels that integrate both thermal insulation and exterior finishing with textile reinforced mortar. In detail, the paper describes, on one hand, the main design strategies following the preliminary analysis and, on the other hand, the whole installation process; besides, the performance of the retrofitted envelope is documented by the results of the monitoring campaign. [ABSTRACT FROM AUTHOR]

• An integrated energy-economic analysis of Net ZEB office buildings was proposed. • A thorough discussion on the energy balance was provided for Italian climate zones. • Energy grid integrations, self-consumption, storage and losses were analyzed. • The cost assessment of office buildings was performed and compared to state-of-art. • The energy-economic benefit of a new Net ZEB office in Italy was demonstrated. Recently, the built environment has become one of the leading sectors in the challenge of decarbonization and energy consumption reduction. Because of the specific use and the complexity of the typological, architectural, and technical characteristics, non-residential buildings represent a challenge to overcome the nearly Zero Energy Building standard and to achieve the objective of Zero or Net Zero Energy Buildings. It is desirable that the energy produced in situ from renewable sources totally covers the energy demand (ZEB); alternatively, the amount of energy self-produced and dispatched into the grid must be greater than (or equal to) the energy withdrawn from the grid (Net ZEB). At the same time, it is necessary not to neglect the economic aspects. The aim of this work is to propose an integrated energy-economic analysis to demonstrate the actual feasibility of new Net ZEB offices in different Italian climate zones. Thus, the energy analysis of a reference building, based on consolidated and cost-effective envelope and HVAC systems, has been carried out through dynamic simulations. The photovoltaic field located on the roof provides the energy needed for lighting, appliances, and HVAC. The obtained results are the energy demand and the energy production from renewable sources for the case study in each Italian climate zone. Moreover, the paper discusses the complexity of the annual energy balance, considering contributions such as grid integrations, self-consumption, energy stored and losses. Finally, the cost assessment of the proposed building has been carried out and compared to the state-of-art, pointing out the economic feasibility of the Net ZEB. [ABSTRACT FROM AUTHOR]

Non-residential buildings like healthcare ones contribute to energy consumption and cause a negative environmental impact. This is mainly due to the age of the buildings, their poor level of energy efficiency and the implementation of only a basic maintenance plan. Owing to the very limited budget available for public administrators, Energy Performance Contracting (EPC), that entails the involvement of an Energy Service Company (ESCo), can provide the entire or part of the capital needed for investments aimed at progressively increasing energy efficiency over their service life. In this paper, three acute hospitals and two community clinics built in Italy are analysed, in order to assess the economic feasibility of several energy renovation actions that can be included within EPC contracts. To this purpose, the outcomes of energy audits carried out in 2014 about these buildings are reported, which involved analyses of consumption measured over the previous three years and assessment of use profiles for the development of models to break down the overall consumption and to estimate potential savings. Diverse improvement strategies were assessed, consisting in either isolated or combined renovation actions and tested on the five buildings, whose comparison was carried out in terms of energy saving, pollution reduction and economic feasibility. As a result, the best combined renovation actions per each hospital were recommended, that included – but were not limited to – the improvement of the control and regulation of existing sub-systems without replacement, partial replacement of other sub-systems and integration of renewables. Finally, each scenario was evaluated through the payback period and other economic performance indexes in order to assess the feasibility of the EPC framework when applied to this case study. [ABSTRACT FROM AUTHOR]

[Display omitted] • A research topic relatively new but with an increase interest in the last five years. • The largest scientific contribution from China, Australia and Italy. • The main journals in the field Building and Environment and Energy and Buildings. • Three main direction of research: thermal energy performance of buildings, ecological benefits and reducing the urban heat. • The main limitation of using green walls is the high cost of installing and maintenance. The continuous state of development of the human society imply a big effort and demand to generate and use more and more energy to power our lifestyle. The impact of human activity has negative effects on the environment and thus solutions to maintain or increase our development rate but in the same time to decrease the pressure on the environment must be developed. In this context, the purpose of this paper is to investigate if the use of green walls systems can be a solution to decrease the energy demands in buildings. The investigation include a bibliometric literature research, a scientometric analysis and an in-depth discussion. The data used for the research were obtained by interrogating the ISI Web of Science and Scopus databases, were selected using the guidelines of the PRISMA method and processed with the help of VOSviewer and Bibliometrix software. The research results indicate an increase interest in this topic in the last five years and that the use of vegetation in the constructed grey areas can bring a lot of benefits especially from environmental point of view. Green walls can be a solution to decrease the temperature on the wall surface in hot summer days and to prevent heat loses in the winter time, and thus have beneficial effects on the amount of energy required to maintain a proper interior temperature. The main limitation of using green walls is given by higher costs of installing and maintain the vegetation on walls, thus, finding new more economical, systems of green walls must be developed in the future. Considering all of this it can be state that green wall systems have the potential to become good solutions not just to improve the energy efficiency of buildings but also to create more sustainable urban areas. [ABSTRACT FROM AUTHOR]

The high cost of energy, along with an urgent need to reduce global worming causing emissions, has contributed to the rethinking of contemporary design and building techniques. It also brought to the forefront the need to increase the energy performance of heritage buildings. Italy's Abruzzo region has many small towns with old structures. The earthquake that struck the area in 2009 caused significant destruction to many communities and buildings. The need to rebuild led to a series of interventions aiming not only at reconstructing, but also at increasing the structure's energy performance. This paper describes a study of Abruzzo's historic buildings and proposes interventions to improve their energy-efficiency. The authors developed a methodology based on an on-site investigation and the study of compatible possible solutions. The first phase includes a series of thermal measurements, using both indirect and qualitative methods such as thermography and direct and quantitative methods. With the information gathered, it was possible to verify the energy performance of each solution based on the level of invasiveness of the proposed intervention. The proposed methodology serves as a guide to recovery design, using a “case by case” approach to identify the method of intervention in each value context. [ABSTRACT FROM AUTHOR]

Abstract: This paper introduces a comparison of different measuring methods of buildings fabric thermal resistance, including the test wall measuring points arrangements and measurement results, conducted in a test chamber in Cagliari (Italy) in summer 2009. Two methods and their measurement uncertainties are presented and compared by the compatibility of measurement study. The non-destructive method involves the heat-flow rate measurement through the test wall and its surface temperatures. The reliability of this method depends on the temperatures difference between the two environments separated by the building envelope. Thus two measurement series with different temperatures were carried out on the test wall. The destructive method instead foresees the acquisition of a sample by the use of a hollow drill, the building envelope layers thickness measurement and the thermal properties assignment to each different material. The wall R-value is the sum of each layer thermal resistance. The comparison shows that the R-values measured by the non-destructive method with a temperature difference of 10°C and 7°C and the one calculated from the destructive method obey the compatibility of measurement principle. [Copyright &y& Elsevier]

• Investigating the impact of different materials adjacent to the air cavities of ventilated facades. • Experimental evaluation on three prototypes in summer and winter. • The thermal mass in the outer side of the gap enhanced the stack effect. • The thermal mass in the inner side of the gap increased the heat transfer towards the indoor. In this paper we have investigated how different materials and thermal masses impact on the performance of ventilated facades with narrow cavities, by measuring the variation in terms of heat flows and ventilation efficiency. While geometry has been widely explored, the role of wall composition has received much less attention. To bridge the gap, three real-scale prototypes of ventilated facades were built and tested all over the year on a mock-up in Central Italy: (i) L, with a lightweight external enclosure, as a baseline reference, (ii) IM, with a massive layer enclosed in the gap and (iii) EM, with an external massive cladding. The results demonstrated that the EM solution more effectively mitigated the average surface temperatures (both external and internal), with values of –2 °C and –1 °C in summer and of –3 °C and –0.5 °C in winter, when compared to the L solution. Moreover, in the EM case, the ventilated cavity reduced both the incoming and outgoing heat fluxes, since the outer mass operated as a thermal buffer between the outdoor and the ventilation chamber. Conversely, the presence of an internal mass determined an increase of the heat transfer towards the indoor environment. The position of the thermal mass in the outer layer also increased the air velocity in the gap thus enhancing the stack effect. [ABSTRACT FROM AUTHOR]