Search

[Display omitted] • Localized heating systems are a proper solution for providing thermal comfort. • Providing personalized heating by radiation or conduction is more convenient, so the inhaled air is kept cool and pleasant. • Local radiant heating systems directly heat the body without heating the environment, leading to lower energy consumption. • With local radiant heating systems, proper thermal comfort and sensation can be achieved even at low air temperatures. Localized heating systems are a proper solution for providing thermal comfort while lowering energy consumption in cold environments. Local radiant heating systems provide thermal comfort at lower air temperatures than convective systems which heats air, resulting in cool and pleasant inhalation air. This paper reviews experimental studies regarding local radiant heating systems considering thermal sensation and comfort. These systems can heat body directly, often with a big view factor toward the body. They do not necessarily heat the air and environment, leading to lower energy consumption. Other types of heating systems combined with local radiant heating systems are also reviewed in this paper. According to reviewed studies, localized methods improved thermal comfort, and the same thermal sensation could be achieved in lower air temperatures, especially when using local radiant heating systems. To design local radiant heating systems properly, improvement of existing local thermal comfort and sensation modeling based on radiant heat transfer is needed. [ABSTRACT FROM AUTHOR]

In times of great transition of the European construction sector to energy efficient and nearly zero energy buildings (nZEB), a market observation containing qualitative and quantitative indications should help to fill out some of the current gaps concerning the EU 2020 carbon targets. Next to the economic challenges, there are equally important factors that hinder renovating the existing residential building stock and adding newly constructed high performance buildings. Under these circumstances this paper summarises the findings of a cross-comparative study of the societal and technical barriers of nZEB implementation in 7 Southern European countries. The study analyses the present situation and provides an overview on future prospects for nZEB in Southern Europe. The result presents an overview of challenges and provides recommendations based on available empirical evidence to further lower those barriers in the European construction sector. The paper finds that the most Southern European countries are poorly prepared for nZEB implementation and especially to the challenge/opportunity of retrofitting existing buildings. Creating a common approach to further develop nZEB targets, concepts and definitions in synergy with the climatic, societal and technical state of progress in Southern Europe is essential. The paper provides recommendations for actions to shift the identified gaps into opportunities for future development of climate adaptive high performance buildings. [ABSTRACT FROM AUTHOR]

• Experiment in three homes using mixed-methods and physical measurements. • Indoor air temperature fluctuations like those of EMPC of space heating. • Night setback-users found the heating control unacceptable. • Acceptance was motivated by economic or environmental benefits. Recent simulation-based studies have indicated that Economic Model Predictive Control (EMPC) of space heating systems can exploit the thermal mass in residential buildings for demand response (DR) purposes in district heating systems. However, there is a lack of studies on residents' perception and acceptance of the fluctuating indoor air temperature behaviour inherent in EMPC of space heating. This paper reports on a case study featuring the residents of three one-story houses located in Denmark. The houses were equipped with technology enabling remote actuation of radiator thermostats and collection of various indoor environmental data. Four different temperature boost interventions mimicking the typical behaviour of EMPC of radiators were executed while a mixed-methods triangulation design, employing questionnaires and semi-structured interviews, was used to collect subjective data. Data showed that residents accepted the behaviour but only after the benefits of the EMPC were explained. The acceptance was motivated by either the prospect of saving money, environmental benefits, or a combination of both. The results thereby indicate that explaining the benefits of EMPC is important if residents are to abandon their current preferences and practices in favour of an EMPC concept. The explanation should consider the diversity in current preferences, expectations, and level of technological pre-knowledge. In addition, the paper also reports on a range of findings related to technical aspects of realising EMPC in practice. [ABSTRACT FROM AUTHOR]

In buildings, occupant behaviour is recognised as a major contributing factor to energy demand and in particular to heating consumption. To achieve thermal comfort within the heating season, people report to use heat in very different ways; for example behaviours include switching on the heating system, putting on warm clothes, drawing curtains, changing rooms, making a hot drink and using a hot water bottle. While research has focused on subjective accounts using interviews, diaries and questionnaires, little is known about the frequency and probability of these behaviours. Using a mixed-method approach, this paper reports on the results of a field study in dwellings using wearable and environmental sensors. The analysis investigates the probability of these behavioural responses as a function of seven independent variables; (1) external and (2) internal monitored temperature, (3) probability of heating being on or off, (4) time of the week, (5) time of the day, (6) the three categories of the predictive thermal comfort model, and (7) the three categories of the adaptive thermal comfort model. Results show that participants were more likely to increase their clothing and activity level as internal temperature decreased, although there was no significant change in activity level throughout the course of a day. Methodologically, this paper demonstrates the effectiveness of different statistical tools in analysing occupants’ behaviours. Substantively, this paper emphasises the need for future research to gather objective data on what people do. [ABSTRACT FROM AUTHOR]

This paper investigates experimentally the cooling performance of a concept, where the radiant ceiling is suspended from the hollow-core concrete slab and by ventilation supply in the plenum and the perforations of the ceiling tiles, ventilation air is distributed without ducts and air terminals to the occupied zone. Literature has proven that this concept allows for more streamlined installation procedures and excellent performance in terms of thermal comfort and draught. The paper reports experimental results from a climate chamber, where the concept was tested under both steady-state and quasi-steady conditions. The steady-state conditions were chosen to map the cooling performance with different air change rates, and different ventilation and water supply temperatures. The results showed that for air change rates of 3 h−1 in the occupied zone and water supply temperature of 17 °C, the cooling output from the ceiling increased by 10 %. The concept was also tested under quasi-steady conditions in a 48 h cycle to quantify the thermal buffering effect of the exposed upper concrete slab when subjected to ventilation supply air. The effect amounted to 11–12 % increased cooling capacity at the end of the working day when the driving temperatures between air, water and thermal zones were at their maximum. [ABSTRACT FROM AUTHOR]

Green roofs have been proposed for energy saving purposes in many countries with different climatic conditions. However, their cooling and heating potential strongly depends on the climate and building characteristics. In particular, the increase of the thermal capacity of green roofs compared to traditional roofs, if not controlled with insulation, may lead to higher cooling and heating loads. This paper discusses the energy saving potential of green roofs adopting a variable insulation strategy. A system consisting of a plenum located between a green roof and the room underneath and a sensor-operated fan that couples (or decouples) the green roof mass with the indoor environment was developed. The fan is activated and stopped using temperature based rules; the plenum is ventilated only when the fan works, creating a variable insulation system. Four cells with an insulated traditional roof, a non-insulated green roof, an insulated green roof, and a green roof with the variable insulation system have been tested in a hot and dry climate with mild winters over several years. This paper compares and discusses different plenum control algorithms. Results are particularly promising because the variable insulating system proved to adjust the thermal capacity of the roof effectively. In summer, the non-insulated green roof and the green roof with variable insulation system achieved the lowest indoor temperature; in winter, the insulated traditional roof and the variable insulation green roof system achieved the highest indoor temperatures. Measurements are hence compared with simulations. Finally, the energy saving potential of the new green roof system is evaluated. [ABSTRACT FROM AUTHOR]

Thermal energy storage (TES) systems with phase change materials (PCMs) as a known energy storage technology have a high potential for increasing the energy efficiency of buildings. In fact, the use of PCMs with various approaches, either active or passive, in the building helps to maintain the temperature in the thermal comfort range for occupants through decreasing the temperature swings, and lower energy consumption by the load reduction/shifting. Due to the significance of this issue, many research works have been carried out on the application of PCMs in buildings. In this study, the experimental works in the fields of PCMs in buildings are taken into account. The papers are classified based on heating, cooling, and air-conditioning. Besides these, the applications of nano-PCMs in buildings are reviewed. According to what has been carried out up to now, the gaps are identified and analyzed for preparing useful suggestions for future works. The recommendations and suggestions are presented at the end of the chapters as well as the conclusion, and the literature is summarized in some tables. [ABSTRACT FROM AUTHOR]

Abstract: The increase of peak and energy demand during the cooling season is becoming a crucial issue, as well as the intensification of the urban heat island effect. This trend is observed at several latitudes, including areas where overheating was unknown at building and urban levels. This phenomenon involves different issues: reduction of greenhouse gases, quality and comfort in outdoor and indoor environment, security of energy supply, public health. The building sector is directly involved in this change and adequate solutions can provide great benefit at energy and environmental levels. Roofs in particular are envelope components for which advanced solutions can provide significant energy savings in cooled buildings or improve indoor thermal conditions in not cooled buildings. Cool materials keep the roof cool under the sun by reflecting the incident solar radiation away from the building and radiating the heat away at night. Roofs covered with vegetation take benefits of the additional thermal insulation provided by the soil and of the evapo-transpiration to keep the roof cool under the sun. These two technologies are different in: structural requirements, initial and lifetime maintenance costs, impact on the overall energy performance of buildings. This paper presents a numerical comparative analysis between these solutions, taking into account the several parameters that affect the final energy performances. By means of dynamic simulations, the paper depicts how cool and green roofs can improve the energy performance of residential buildings in different localities at Mediterranean latitudes. [Copyright &y& Elsevier]

The aim of this paper is to study and compare the temperature profile and energy performance of traditional and Vegetative Roofs (VRs) during winter season in Lebanon, a country in the Middle East. Three roof mockups were installed on the rooftop of the Chemical Engineering Department at the University of Balamand: a Traditional Gravel Ballasted Roof (TGBR) and two Extensive Green Roofs (EGRs) with different substrate depth and composition. Each minute, the temperature of air, on TGBR surface, and at different depths of EGR was recorded. The daily cooling and heating demands were also calculated. Results confirmed that VRs protect the roof membrane from high temperature fluctuations and decrease air temperature by a factor of one and a half during sunny winter days ( T airmax = 32 ° C ). Findings of this study also showed that the total cooling demand of EGR decreased by 90% compared to TGBR. [ABSTRACT FROM AUTHOR]

There is a growing trend for the use of thermo-active building systems (TABS) for the heating and cooling of buildings, because these systems are known to be very economical and efficient. However, their control is complicated due to the large thermal inertia, and their parameterization is time-consuming. With conventional TABS-control strategies, the required thermal comfort in buildings can often not be maintained, particularly if the internal heat sources are suddenly changed. This paper shows measurement results and evaluations of the operation of a novel adaptive and predictive calculation method, based on a multiple linear regression (AMLR) for the control of TABS. The measurement results are compared with the standard TABS strategy. The results show that the electrical pump energy could be reduced by more than 86%. Including the weather adjustment, it could be demonstrated that thermal energy savings of over 41% could be reached. In addition, the thermal comfort could be improved due to the possibility to specify mean room set-point temperatures. With the AMLR, comfort category I of the comfort norms ISO 7730 and DIN EN 15251 are observed in about 95% of occasions. With the standard TABS strategy, only about 24% are within category I. [ABSTRACT FROM AUTHOR]

To date, religious facilities have received little attention in the published literature regarding energy use and efficiency. With unique operating and building characteristics, these buildings have distinct opportunities for analysis in regards to building energy use and occupant comfort. With overall lower average energy intensity, religious facilities rarely receive energy assessments or are operated by experienced personnel. Therefore, identifying common issues is critical for training church owners in energy efficiency. This paper presents an in-depth analysis of heating, ventilation and air conditioning (HVAC) systems and occupant comfort in two religious facilities. The analysis reveals that the largest opportunities for reduction in energy use come from proper maintenance and operation of HVAC equipment and schedules. Temperature setbacks are shown to be an important operational setting to reduce energy usage. An accompanying analysis on thermal comfort reveals that temperature setbacks must be coupled with sufficient preconditioning of the space to ensure occupant comfort during intermittent building occupancy. An analysis of CO 2 levels in the building during occupancy reveals the need for sufficient outside air to meet ventilation standards. [ABSTRACT FROM AUTHOR]

Current indoor thermal environment is usually automatically controlled based on a temperature set-point given by room occupants or building managers. However, investigation shows that many temperature set-points are far from the comfortable temperature range recommended by design handbooks. Such unreasonable temperature set-points will result in not only uncomfortable indoor thermal environment, but also waste of cooling or heating energy. The authors have proposed a methodology of satisfaction based control to take place of the traditional set-point based control. This paper describes the experimental comparison results between satisfaction based indoor thermal environment control and set-point based control. Two test-beds were set up and a series of experiments was conducted to compare control performances, user acceptances, user work performances and system energy consumptions of the set-point based and satisfaction based control. The comparison results show that the satisfaction based control can achieve more stable thermal environment. Both of the two control methods can get relatively high scores regarding user acceptance and work performance. There are no statistically significant differences for user acceptance and work performance between two control methods. However, satisfaction based control consumed 15.3% and 11.9% less energy at two test-beds respectively than set-point based control due to more reasonable temperature settings given by the satisfaction based control. [ABSTRACT FROM AUTHOR]

The capability to dynamically plan, predict, and control indoor conditioning allows to adapt to individual preferences of inhabitants and enables demand side management. While former mainly improves thermal comfort of inhabitants so does latter unlock ecological and financial opportunities mostly for energy utilities. Commonly, dynamic indoor conditioning is based on piece-wise constant indoor temperature constraints. This paper's contribution is the presentation of additional constraints: in particular ones expressed relative to the nominal behavior of a hydronic heating system. This allows to simultaneously harness the relevant process variables in particular during the pre-loading and post-loading phases of a load reduction. The findings are based on data sets acquired on 10 inhabited, residential buildings in Stockholm over a whole year. One of the findings is that building models need to be adaptable if predictive control is applied in practice. This adaptability is assured by a novel concept, i.e. a so called model manager on which the control is relying for the selection of the most accurate model. Centralized optimal control of buildings connected to a district heating network is challenging in practice due to a high computational load. In order to reduce it, the herein presented method elaborates plans only every hour instead of at every control step for optimal control. Since these plans cannot be optimal due to the lack of regular update a hitherto unknown cascaded control logic has been developed that corrects planning errors and other disturbances. Capabilities are demonstrated and compared to conventional controllers in dynamic simulations of a multi-zoned building. The herein presented method is to our knowledge the first to provide all flexibility desired by energy utilities and inhabitants alike through harnessing the consequences of transitions. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a review of studies on natural convection heat transfer in the triangular enclosure namely, in attic-shaped space. Much research activity has been devoted to this topic over the last three decades with a view to providing thermal comfort to the occupants in attic-shaped buildings and to minimising the energy costs associated with heating and air-conditioning. Two basic thermal boundary conditions of attic are considered to represent hot and cold climates or day and night time. This paper also reports on a significant number of studies which have been performed recently on other topics related to the attic space, for example, attics subject to localized heating and attics filled with porous media. [Copyright &y& Elsevier]

Abstract: Work stations in industrial spaces are frequently arranged at a significant distance from each other. Local heating applying, among others, the gas-fired direct radiant heaters, is a viable alternative to the central heating. Radiant heaters provide heat comfort to workers and guarantee the maintenance of higher temperatures of the surrounding walls at a lower indoor temperature. The advantage of heating by gas-fired radiant heaters is the lower operational cost comparing to another systems. It uses less energy to obtain 2–3K lower indoor temperature than in case of heating by conventional systems. The radiant temperature at work stations should be high enough to eliminate thermal discomfort, which in particular, is a result of radiant temperature asymmetry that may be caused by excessive and asymmetric overheating of the human body by a radiant heater. This paper includes formulas, based on the results of the self-designed test, which are then used in the calculation of the radiant temperature and the radiant temperature asymmetry, depending on the radiant heater position and the indoor temperature. This paper presents also the most recognized interrelations between the radiant temperature and its asymmetry. The discussed parameters are particularly significant in the heating process using high-temperature radiant heaters. [Copyright &y& Elsevier]

Model predictive control (MPC) has been studied in the building science realm for about three decades. However, the following two aspects of the building control have not been studied thoroughly in MPC research. One is the impact of the mixed-mode cooling system on the active heating ventilation and air conditioning (HVAC) energy consumption, and the other is the differences of individual thermal comfort preference and its impact on energy. This paper proposes an occupant-oriented mixed-mode EnergyPlus predictive control system to optimize HVAC energy consumption while meeting the individual thermal comfort preference. A web-based dashboard is implemented in the test-bed building for three months to collect individual thermal comfort preference data. The data analysis results suggest that occupants have various tolerances and preferences about thermal comfort. The simulation results show that, during one week of a typical swing season, the mixed-mode system further reduces the active HVAC energy consumption, and the diversified occupant thermal comfort preference has significant impact on HVAC energy consumption. [ABSTRACT FROM AUTHOR]

In buildings, HVAC systems consume a high amount of energy to provide thermal comfort for occupants. A methodology is presented in this paper to control thermostat operation of the buildings considering the effects of indoor and outdoor boundary conditions and phase change material (PCM) characteristics. EnergyPlus v8.1 building energy simulation software was used to analyze the energy performance of the PCM incorporated building models and to implement Fanger model to control HVAC thermostat operation according to BS EN 15251:2007 thermal comfort categories. Three types of building HVAC schedule, PCM with different melting points and layer thicknesses were studied for Madrid climate zone. Moreover, the impact of occupants clothing on the energy consumption was investigated. Furthermore, payback analysis was conducted to find out the economic benefits of PCM integration into the building envelopes. Application of PCM improved the cooling and heating energy performances except for the office model in winter (heating period). Additionally, higher energy savings and lower payback periods were observed when PCM with higher melting point was applied to the buildings. Eventually, energy savings in PCM incorporated models were found to improve further when occupants changed their clothing behavior in winter. [ABSTRACT FROM AUTHOR]

This paper presents a cooperative fuzzy model predictive control (CFMPC) for heating and cooling of buildings. Because of different supply zones, the large time constants and the non-linear building dynamics with respect to the different seasons, a CFMPC concept is proposed. The overall non-linear building is split into different zones, which are consisting of input-coupled Takagi-Sugeno (TS)-fuzzy models. Each such TS-fuzzy model is constituted by a local linear model network (LLMN). The LLMN consists of local linear models (LLM), which are representing the different seasons: winter, transition season (fall and spring), and summer. The control of each LLM is realized by model predictive control (MPC). For each building zone the associated MPCs are output-blended by the fuzzy membership functions, which leads to fuzzy model predictive control (FMPC). In addition to the FMPCs a global MPC is controlling the thermally activated building systems, which affect all other zones. To coordinate the different controllers a cooperative iteration-loop is assumed, which leads to cooperative fuzzy model predictive control (CFMPC). The concept is developed for a specific demonstration building and can be easily adapted for other complex buildings. A simulation example demonstrates that the proposed CFMPC achieves a performance increase with less energy consumption, as compared to FMPC controllers and historical measured data of the demonstration building. [ABSTRACT FROM AUTHOR]

Phase Change Materials (PCM) technology can be used for thermal storage and peak load shaving. This paper presents the optimization study of a PCM-Air heat exchanger as well as the development of load shifting solutions which take into account the thermal comfort of the occupants and the indoor air quality. The exchanger contains macroencapsumated PCM (paraffin) and is conceived in a way that facilitates its integration in a ventilation system. It is aimed to shift space heating electrical consumption from peak to off-peak period. The study is performed using an experimentally validated numerical model based on the heat balance approach and the apparent heat capacity method. Several parameters were investigated during the optimization processes, including heat exchanger dimensions, PCM quantity and properties, seeking the configuration with the optimal compromise between stored heat and the time needed for the charging/discharging process. The numerical model was coupled to a building simulation model with several control strategies investigating different scenarios over a one- month winter period. The scenarios vary with increasing complexity, first considering load shifting and thermal comfort, then adding the final price of electricity consumption and finally taking into account the indoor air quality. [ABSTRACT FROM AUTHOR]

Passive Houses are buildings which provide comfortable indoor conditions at an extremely low heating and cooling load. The peak daily average heating and cooling loads are typically below 10 W/m 2 and annual useful energy demands are below 15 kW h/(m 2 a). The Passive House standard was originally developed in Germany. In this paper we show by hygro-thermal dynamic simulation that it is possible to realize residential Passive Houses in all of the world's relevant climate zones, represented here by Yekaterinburg, Tokyo, Shanghai, Las Vegas, Abu Dhabi, and Singapore. The window quality, insulation levels, and mechanical services all depend on the climate as well as on the building's shape and orientation. The resulting annual energy demand for space conditioning of the Passive Houses is 75 to 95% lower than that of a traditionally insulated building of the same geometry. In humid climates like Shanghai or Singapore, special attention must be paid to humidity aspects. In climates which are hot and humid all year long, the total useful energy demand for sensible and latent cooling may exceed 70 kW h/(m 2 a) even in a Passive House. Finally, it is shown that the architectural quality is not compromised by the Passive House requirements. [ABSTRACT FROM AUTHOR]

Conventional weather-compensated heating controllers are often configured to deliver more heating than necessary, resulting in energy losses. Furthermore, they cannot take into account future climate conditions, and yield less than optimal thermal comfort. We have developed a non-invasive add-on module for existing heating controllers that implements an adaptive, model-predictive heating control algorithm. This algorithm helps the heating controller deliver a heating energy just sufficient for maintaining thermal comfort, resulting in energy savings. In this paper we report on the energy savings measured on ten buildings equipped with this device. By monitoring the space heating energy during the 2013–2014 heating season, and by periodically alternating between the new controller and the reference controller, we establish the energy signature of all buildings with both controllers. The comparison of the energy signatures yields the relative energy savings achievable with the new controller. These energy savings are positive for all test sites, with a mean of 28 ± 4% (standard error of the mean). [ABSTRACT FROM AUTHOR]

Energy performance simulation is a generally used method for assessing the energy consumption of buildings. Simulation tools, though, have shortcomings due to false assumptions made during the design phase of buildings, limited information on the building's envelope and installations and misunderstandings over the role of the occupant's behaviour. This paper presents the results of a Monte Carlo sensitivity analysis on the factors (relating to both the building and occupant behaviour) that affect the annual heating energy consumption and the PMV comfort index. The PMV results are presented only for the winter (heating) period which is important for energy consumption in Northern Europe. The reference building (TU Delft Concept House) was simulated as both a Class-A and a Class F dwelling and with three different heating systems. If behavioural parameters are not taken into account, the most critical parameters affecting heating consumption are the window U value, window g value and wall conductivity. When the uncertainty of the building-related parameters increases, the impact of the wall conductivity on heating consumption increases considerably. The most important finding was that when behavioural parameters like thermostat use and ventilation flow rate are added to the analysis, they dwarf the importance of the building parameters. For the PMV comfort index the most influential parameters were found to be metabolic activity and clothing, while the thermostat had a secondary impact. [ABSTRACT FROM AUTHOR]

Climate change has been shown to significantly alter the heating and cooling needed to maintain thermal comfort within a home. However, limited studies have investigated the impact on the design philosophy associated with achieving an energy efficient building envelope with the onset of climate change. Applying robust future TMY for 2070 the change in heating and cooling demand has been studied in this paper for various combinations of external and internal wall insulation, roof insulation, reflective foil, thermally reflective roofs and different floor coverings. A building thermal model was used for the mild temperate climate of Adelaide, Australia, which requires both heating and cooling, but is dominated by heating. Climate change was found to increase and shift this demand to cooling dominated. It was determined that with climate change, heating becomes significantly less important in better insulated buildings and therefore measures which reduce cooling load are more critical. It is concluded that in this climate zone, climate change design approaches need to dramatically change to focus on cooling, contrary to present strategies. [ABSTRACT FROM AUTHOR]

The Chinese Kang, a traditional heating device, is widely used in northern rural China. It recovers the heat from cooking smoke and provides local thermal comfort to people sitting or lying on it. However the heat supply ability of the traditional Kang is limited due to constraints of the surface temperatures and heat transfer coefficients. In this paper, a new Chinese Kang with forced convection (CKFC), which adopted hot water as the heat transfer medium and added a small fan to enhance convective heat transfer, was developed. A full-scale CKFC system was constructed for actual application in a rural house and its thermal performance was measured. Experimental data show that during the space heating period, the heating power of forced air convection ranged from 625 W to 1170 W, while that through the CKFC surfaces was only 200–500 W in the local heating or space heating mode to maintain local thermal comfort. Meanwhile, the CKFC retained the merits of a traditional Kang by providing local thermal comfort. The measured asymmetry of Kang plate surface temperatures was 6.7 °C. Overall, the CKFC has satisfactory performances as a new heating terminal device in rural houses. [ABSTRACT FROM AUTHOR]

Several studies have shown that the actual energy performance of buildings can differ significantly from its designed value. An important part of this performance is constituted by the building fabric's thermal performance. A common method to evaluate the latter for an actual building is the co-heating test. The co-heating test comprises a quasi-stationary heating experiment followed by linear regression analysis of aggregated building performance data. This paper reviews related research work and cristallises the current state-of-the-art. The physical phenomena working behind the scenes of the generally assumed simplified heat balance are discussed. Statistical constraints generally prevent these from being uncovered fully during the analysis. Multiple linear regression is proposed as the most sensible method to analyse co-heating measurement data. A novel way to visualise such analysis, deduce building performance data graphically and compare different co-heating test results is presented. [ABSTRACT FROM AUTHOR]

This paper proposes a new method for an optimal control of the heating system at the building scale. This control is a new approach of energy planning that aims to decrease the heating consumption/expenses over a defined prediction horizon while respecting the occupants’ thermal comfort. It employs a simplified building thermal model to simulate the building thermal behavior taking into consideration the weather predictions. This approach is based on the application of Monte Carlo method, i.e., a random generator for the heating system scenarios. The aim is to determine the optimal heating plan for the prediction horizon that fulfills the constraints regarding the thermal comfort of occupants and the minimization of the energy consumption/expenses together with achieving a load shedding. [ABSTRACT FROM AUTHOR]

Abstract: HVAC energy savings have been a key focus of recent building energy management efforts, but the savings typically reduce thermal comfort for building occupants. Established thermal comfort models use complex and person-specific parameters, such as clothing insulation and metabolic rate, to predict individual comfort levels, making the design of automated comfort modelling systems a highly challenging endeavour. In this paper, we investigate the use of humidex, which encapsulates both temperature and humidity, as an easily measurable and highly representative indoor thermal comfort predictor. We verify the feasibility of humidex as an indoor thermal comfort predictor by contrasting its performance to that of the best feature set (the feature set that best predicts the thermal comfort) constructed jointly by recursive sequential forward selection and support vector regression. The analysis using the global datasets, including data from seven climate zones across three continents, shows that humidex is a favourable and easily measurable indoor thermal comfort descriptor when humidity is significant. We take away the message from the analysis and design, develop, and deploy a system that couples a deployment of sensor nodes in an office environment, where each node collects the ambient temperature and humidity at each person's desk, and an automated survey mechanism to record people's thermal sensation votes. We use subjective response through the surveys as ground truth to validate the performance of the thermal comfort prediction using humidex. The results confirm our analysis of global datasets and show that humidex is a good predictor of indoor thermal comfort at high humidity. [Copyright &y& Elsevier]

Abstract: This paper described the development of regression models which are able to predict office building annual heating, cooling and auxiliary energy requirements for different HVAC systems as a function of office building heating and cooling demands. In order to represent the office building stock, a large number of building parameters were explored such as built forms, fabrics, glazing levels and orientation. Selected parameters were combined into a large set of office building models (3840 in total). As different HVAC systems have different energy requirements when responding to same building demands, each of the 3840 models were further coupled with five HVAC systems: VAV, CAV, fan-coil system with dedicated air (FC), and two chilled ceiling systems with dedicated air, radiator heating and either embedded pipes (EMB) or exposed aluminium panels (ALU). In total 23,040 possible scenarios were created and simulated using EnergyPlus software. The annual heating and cooling demands and their HVAC system''s heating, cooling and auxiliary energy requirements were normalised per floor area and fitted to two groups of statistical models. Outputs from the regression analysis were evaluated by inspecting models best fit parameter values and goodness of fit. Based on the described analysis, the specific regression models were recommended. [Copyright &y& Elsevier]

Abstract: The occupants’ behaviour has a great influence on the energy demand, management and consumption of a building. This paper investigates the influence of three parameters related to human behaviour through their modes of occupations (based on family size, management of the heating system and management of the heated area) on the housing heating loads of a standard dwelling in Belgium. Seven levels of insulation were tested: no insulation, two intermediate levels corresponding to 3 and 6cm of insulation, the current standard for new buildings in Belgium, the low energy standard, the very low energy standard and the passive house standard. Multi-zone simulations were performed with a dynamic thermal simulation software. The impact of occupants’ lifestyle and the interactions between occupation modes and insulation levels are highlighted. These results prove that the more the building is insulated, the more the lifestyle proportionally influences the heating loads. One important strategy for reducing heating consumption during the whole life cycle of the building is adapting the size of the house and its occupation modes to the evolution of family size. However, insulation is paramount, and increasing the insulation of the house provides generally better results than merely adapting the occupation mode. [Copyright &y& Elsevier]

Abstract: Our paper proposes to present the static heat balance of the human body and the sensitivity range of the comfort equation through average skin temperature and heat loss by sweating, based on Fanger''s work. We will investigate which measurement methods he used to develop the two heat balance equations. In addition a comfort diagram will be used to illustrate its sensitivity at various thermal load levels. [Copyright &y& Elsevier]

Abstract: Thermal mass can be effectively used for controlling temperature in buildings. Based on its location and function, building thermal mass can be classified as interior thermal mass and exterior (envelope) thermal mass. In this paper, the dynamic heat transfer performance of exterior Planar Thermal Mass (ePTM) subject to sinusoidal heating and cooling is investigated. When the mean value of outdoor air temperature is equal to indoor air temperature, solutions of temperature distribution and heat flux in ePTM are deduced analytically. Using the analytical solutions, heat exchange and thermal storage of ePTM are attained. Correspondingly, the time lag and the decrement factor are obtained; they show similarity characteristics—independent of environment temperatures. When the two temperatures are not equal, an approximated temperature distribution solution is developed based on the principle of superposition, which has been validated by numerical solutions. The approximated solution is then used to investigate the heat exchange between the ePTM and the environment. In contrast to the common belief that a large thermal mass has an apparent insulating effect, no “insulating effect of mass” under sinusoidal heating and cooling is found in this investigation. Another two rules of thumb based on common belief are corrected: a wood wall is better than a concrete wall of same thickness as exterior walls in terms of the time-lag effect and the decrement factor. The effect of the time lag is not the longer the time lag is the better its contribution to thermal comfort becomes. [Copyright &y& Elsevier]

Abstract: This paper identifies the impact of thermostat strategies on heating and cooling energy consumptions in buildings, thus suggesting the importance of a database for understanding the effect of thermostat settings and for deciding energy-conscious strategies. Using computer simulation, diverse thermostat strategies – change of setback period, change of set-point temperature, and change of setback temperature – were tested parametrically in a typical USA single-family homes, located in two climate zones, namely cold (Detroit, Michigan) and hot-humid (Miami, Florida). Analysis revealed that heating and cooling systems were significant energy-consuming components in each climate zone. Accordingly, heating energy in cold climate zones and cooling energy in hot-humid climate zones have potential for matchingly significant saving. Diverse thermostat strategies (changes of setback period, of set-point, of setback temperature) demonstrated their obvious impacts on such saving. In the cold climate in particular, the heating system showed the most significant energy-saving effect via proper thermostat strategies. Proper setback period, set-point and setback temperature need to be established to achieve energy efficiency in residential buildings. [ABSTRACT FROM AUTHOR]

Abstract: A traditional Chinese heating system, the Chinese Kang, is used by 175 million people in detached houses in the rural regions of China, especially in Northeast China. This system utilizes biomass such as corn stalks, straw, corncob and energy plants as the heat sources. The objective of this paper is to establish a set of models to simulate the energy performance of the Kang heating system in one Chinese detached house. An experimental field study was carried out to collect practical parameters in a newly constructed Chinese detached house. The dynamic performance of the Kang heating system was simulated by using IDA-ICE 4.0 embedded with an empirical model built in the field study. The results show that the simulation can obtain good overall agreement with the field measurement results. It was confirmed that the Kang model created by IDA-ICE 4.0 is capable of simulating the performance of the Kang system and of calculating energy consumption in the detached house. Moreover, the result reveals that the thermal environment in the present Chinese detached house is still poor during the severe cold season if only the Kang system is used to heat the whole house. [ABSTRACT FROM AUTHOR]

Abstract: In heating mode, fresh air is still essential for a chilled panel system in order to ensure the indoor air quality. In this paper, a chilled ceiling panel system was designed and built in a typical office room. The thermal environment and thermal comfort in the room were fully measured and evaluated by using the Fanger''s PMV–PPD model and the standard of ISO 7730 respectively, when room was heated in two modes, one of which is the chilled panel heating mode and the other of which is the combined heating mode of chilled panel and supply air. The research results indicate that in the combined mode, ceiling ventilation improves the general thermal comfort and reduces the risk of local discomfort. Under the condition of same general thermal comfort, the heating supply upper limit of chilled panel can be increased by 12.3% because of air mixing effect caused by introduction of air ventilation. [Copyright &y& Elsevier]

Abstract: This paper presents a predictive control structure for thermal regulation in buildings. The proposed method exploits the intermittently operating mode of almost all types of buildings. Usually the occupation profile can be known in advance and this fact will be used to reduce the energy consumption without decreasing the thermal comfort during the occupation. For that purpose, the predictive control strategy is first presented for a single zone building then extended to a multizone building example. Two opposite control strategies commonly exists: the decentralized control structure, which does not offer good performances especially when the thermal coupling among adjacent rooms is not negligible, and on the other hand, the centralized control for which the computational demand grows exponentially with the size of the system, being very expensive for large scale buildings. Our solution is based on a distributed approach which takes the advantages of both methods mentioned above. A distributed MPC algorithm with one information exchange per time step is proposed with good control performances and low computational requirements. Simulations and a comparison performance table end the article. [Copyright &y& Elsevier]

Abstract: This paper presents a detailed meta-analysis of end and primary energy use for heating, cooling and ventilation of 11 low-energy non-residential buildings and one residential building in Germany that belong to the EnOB research program launched by the German Federal Ministry for Economy. In particular, the analysis emphasizes the substantial impact of auxiliary energy use on the efficiency of heating and cooling performance. The investigated buildings employ environmental energy sources and sinks – such as the ground, ground water, rainwater and the ambient air – in combination with thermo-active building systems. These concepts are promising approaches for slashing the primary energy use of buildings without violating occupant thermal comfort. A limited primary energy use of about 100kWhprim/(m2 neta) as a target for the complete building service technology (HVAC and lighting) was postulated for all buildings presented. With respect to this premise, a comprehensive long-term monitoring in high time resolution was carried out over the course of two to five years, with an accompanying commissioning of the building performance. Measurements include the energy use for heating, cooling, and ventilation, as well as the auxiliary equipment, the performance of the environmental heat source and sink, and local climatic site conditions. [Copyright &y& Elsevier]

Abstract: The Chinese kang is an ancient integrated home system for cooking, sleeping, domestic heating and ventilation. It is still widely used today in nearly 85% of rural homes in northern China. In 2004, there were 67 million kangs used by 175 million people. Existing kang designs are mostly based on the intuition and accumulation of craftsman experience. There is a trend that Chinese kang is gradually replaced by bed and coal-burning radiators, domestic heating stoves, etc. using commercial energy. As rural building heating constitutes 25% of total building energy consumption in China, we consider that the transition and new technologies for rural home heating in northern China is crucial for managing future building energy consumption in China. This paper reviews the basic heat transfer and airflow principles of Chinese kang, as well as describing the traditional grounded kang and the relatively new elevated kang. The thermal performance of the kang is shown by data from literature and field surveys. The future of Chinese kang and research needs is also briefly discussed. There is also a need for scientific study in addition to experience accumulation, to form basis for engineering design. [Copyright &y& Elsevier]

• Sleeping thermal comfort using a bed-based ASHP was numerically studied. • A digital thermal manikin (DTM) was used to simulate a sleeping person. • The PTS - WPD model was used to evaluate sleeping thermal comfort. • Four factors affecting sleeping thermal comfort were numerically analyzed. Sleeping is an important human activity and heating system is needed for a comfort sleeping thermal environment in winter. By combining the merits from both an air source heat pump (ASHP) and a Chinese-Kang heating system, a prototype bed-based ASHP (B-ASHP) system has been proposed, and several design/operating parameters were experimentally and numerically studied previously. A numerical study using a digital thermal manikin (DTM) on the impacts of four influencing factors, i.e., operating mode, bed surface temperature (t bed), thermal resistance of mattress (R mat), and thermal resistance of quilt (R q) on sleeping thermal comfort was carried out, and the study results are reported in this paper. The numerical study results suggested that firstly, to maintain a suitable sleeping thermal environment, the use of only the Horizontal section (H-Section) of the bed-based heating terminal of the B-ASHP system was adequate; however using the Horizontal and Vertical section (H + V-Section) could minimize the temperature difference between the micro-climate close to the bed and outside environment, although with a higher energy consumption. Secondly, t bed of the bed-based terminal should be carefully selected, and a t bed of 44 °C could both meet the requirement of thermal comfort and acceptable operating efficiency of the B-ASHP system. Thirdly, the use of a mattress would reduce the heat transfer from the bed-based terminal to a sleeping person and indoor space, however an excessively higher R mat of mattress would reduce the heating capacity and operating efficiency, leading to a cold sleeping environment. Finally, the use of a quilt would help prevent the heat loss from a sleeping person, thereby maintaining a warmer sleeping thermal environment, however a higher-than-necessary R q of quilt would decrease the sleeping thermal comfort. [ABSTRACT FROM AUTHOR]

Abstract: This paper reports on an analytical investigation into the energy saving potential associated with modified comfort limits in transitional spaces in buildings. Such spaces may not require the same high level and close environmental control of more fully occupied spaces and thus a wider variation in conditions and interpretation of thermal comfort may be permitted. Estimations are made of energy saving potential based upon typical floor area proportions utilised for transition spaces of various types in office/commercial buildings. The data are combined with suggested norms for comfort expectation that have wider temperature limits than for normally occupied office zones. The method has been applied to a series of building types situated in the climate of the East Pennines area of the UK using a thermal analysis tool. The results show that useful energy savings (particularly for heating) are possible by allowing for a modest (and realistic) relaxation of prescribed comfort standards in transition spaces. Further work is now required to confirm the limits and assess energy saving in practice. [Copyright &y& Elsevier]

An experiment was carried out over two heating seasons to test the performance of an inferential control scheme (ICS), which was designed to optimise the control of boilers in multi-zone heating systems [Building Services Engineering Research and Technology 4 (2003) 245], in a real installation. This paper presents the development of the prototype controller, method and result of the experimental testing. The experimental results show that the ICS can significantly improve the long-term performance, i.e. energy efficiency and thermal comfort, of the multi-zone heating system compared with conventional control schemes. It also demonstrates that the ICS can be implemented in a microprocessor-based controller and be commissioned using short-term monitoring data, which makes it a practical control technique. [Copyright &y& Elsevier]

• Control strategy of the heating of an all-air system in an educational building is optimized. • A nearly zero energy educational building in Belgium is used as case study. • Winter monitoring campaign is analysed and a building energy simulation is calibrated. • Climatic control of the boiler causes a decrease of comfort hours up to 23%. • Climatic control of the storage tank determines energy saving until up to 47%. The optimal control of the HVAC system in the nearly zero energy buildings (nZEBs) can be considered as a challenge. Indeed, the lack of data given by monitored data does not allow understanding what are the implications of different strategies on thermal comfort and energy consumptions. This paper determines an approach for the evaluation of the management of the heating system in an existing educational nZEB. The aim is to understand how the energy efficiency of the heating system is sensitive to controls strategies and the important role played by the control systems. The test lecture rooms on KU Leuven Ghent Technology Campus (Belgium) have been chosen as case study. A deep analysis, starting from an in-field monitoring, was carried out during the winter period of 2019, in order to assess the actual operation and the energy use of building systems under real conditions. Then, a building energy simulation (BES) model of the building and its systems was developed and calibrated against the real monitoring data. Control strategies of the heating system are simulated and compared to the current configuration. The simulation results show that strategies based on a definition of a heating curve for the boiler can reduce the comfortable time (−23%). Controlling the temperature inside the storage tank as a function of the outdoor temperature together with the control on the activation of the air handling unit result in an energy savings from 32% to 46%, with a correspondent increase of comfort time in the period from 0.6% to 3.4% compared to the baseline scenario, depending to the relationship between the external temperature and water temperature inside the water storage tank. [ABSTRACT FROM AUTHOR]

• Listed dwellings of southern Spain were monitored in winter to evaluate IEQ and EP. • Lengthy high rates of IRH were observed. • High levels of CO 2 concentration were recorded in bedrooms at night. • Thermal comfort is only achieved through a constant use of the heating systems. • Heat losses are entirely building-driven. Although European heritage buildings are excluded from energy efficiency targets, it would be beneficial to include the largest group, that of listed housing, in energy retrofit plans, in order to encourage its occupation and contributing to the sustainable maintenance of historic cities. This requires reliable experimental studies, which have been rare so far, in order to establish energy rehabilitation plans that do not jeopardize the conservation of their values. This paper aims to contribute to addressing this gap. It evaluates the energy performance and indoor environmental quality of dwellings within listed buildings of the conservation area of Seville, Spain, in the Mediterranean climate zone, under actual winter use and occupation conditions. An experimental campaign was conducted, generating energy models and measuring rates of indoor air temperature to validate them. The findings highlight important health and environmental issues: despite the mild winters of southern Spain, intensive use of the heating system is needed to maintain thermal comfort indoors, increasing polluting emissions; CO 2 concentration in bedrooms is usually excessive overnight and, regularly, indoor relative humidity remains too high; heat losses depend entirely on the physical condition of the constructive elements (walls, roofs, air leakage and glazing) which occupants cannot easily improve. [ABSTRACT FROM AUTHOR]

• An optimized operation strategy is proposed for ASHP heating of school buildings. • Effects of different combinations of start-up times and return water temperatures on power consumption are compared. • A longer warm-up time with a lower water temperature can save more energy. Air-source heat pump (ASHP) has been widely applied in heating systems of school buildings. In order to achieve building energy efficiency while ensuring indoor thermal comfort, the paper compared the effects of different operation strategies including intermittent heating mode in non-working hours and setpoint of return water temperature in working hours. A middle school building in Tianjin, China is chosen as a case study and its physical model is developed by using the EnergyPlus tool. After verifying the validity of the model, the article simulated 64 different operation conditions produced by combining 8 start-up times with 8 return water temperature setpoints to find a better operation mode of the intermittent heating. Results indicate that running at a lower water temperature with an earlier start-up time is more energy efficient compared with running at a higher water temperature with a later start-up time while meeting the thermal comfort requirement. In addition, by changing the return water temperature setpoints hourly based on the outdoor air temperatures, the situation of overheating and undercooling during working hours has been well improved and the energy saving rate is about 17% during the entire heating season. [ABSTRACT FROM AUTHOR]

This paper presents a field study carried out on a novel self-regulating active beam system installed in an office building located in Jönköping, Sweden. The system consists of two parts: an air handling unit (AHU) to satisfy ventilation requirements, and a water circuit to meet sensible heating and cooling loads. The novelty of the system is in relation to the water circuit, which is able to provide simultaneous heating and cooling through a single loop with water at near room air temperature. The field study evaluated both the performance of the system and the indoor climate in the building. The performance of the system was monitored for a one-year period through sensors placed along the water circuit and the AHU. The indoor climate in the building was assessed by measuring relevant physical parameters and by conducting a survey among occupants. Results show that the system is capable of maintaining indoor air temperatures between 21 and 24 °C by circulating water at temperatures of about 22 °C. The annual average indoor air temperature during working hours was 22.6 °C ± 0.6 °C, indicating low variation during the year. Answers to questionnaires revealed that occupants were satisfied in terms of thermal comfort, achieving an acceptability rate of 90%. An average thermal sensation vote of −0.38 in winter and −0.48 in summer was obtained, indicating that occupants generally felt slightly cold. [ABSTRACT FROM AUTHOR]

• Article analyzes reported thermostat settings by 494 males and 786 females living in the US. • Average male and female reported thermostat settings differ by no more than 0.3 °C [0.5 °F]. • Controlling for demographic and environmental characteristics reduces the difference. This paper examines the extent to which males and females report different thermostat settings using data from single-occupant homes in the United States. Reported thermostat settings for heating and cooling at night, at home, and when away from home are rigorously tested for behavioral differences between the sexes. In general, single-occupant males and females report the same thermostat settings on average. The lack of differences between sexes is robust to controlling for demographic characteristics and environmental variables that differ systematically between the samples using both regression and decomposition approaches. These findings have important implications for thermostat settings and thermal comfort in shared spaces. [ABSTRACT FROM AUTHOR]

• A novel bed-based air source heat pump (B-ASHP) system was proposed. • A prototype experimental B-ASHP system was established and tested. • The B-ASHP system can be operated at both nighttime and daytime modes. • Better thermal comfort and bed surface temperature distribution can be achieved. • A number of issues requiring further considerations were identified. Air source heat pumps (ASHPs) have been increasingly used for space heating due to their high energy efficiency and installation flexibility. On the other hand, in many rural areas in northern Chinese provinces, Kangs, a kind of traditional heating systems based on burning biofuels, are still being used for space heating in winter. Based on the pros and cons of both ASHPs and Kang-based heating systems, a novel bed-based ASHP (B-ASHP) system has been proposed to combine the advantages from both an ASHP and a Kang heating system. In this paper, a prototype experimental B-ASHP system was designed and established, and its dynamic and steady-state operating performances tested in four test cases. The test results from the four test cases demonstrated that the prototype experimental B-ASHP system can achieve quicker increases in indoor air temperatures and bed-surface temperatures than Kang-based heating systems. The use of experimental B-ASHP system can lead to a more uniformed vertical indoor air temperature gradient, thus a better occupants' thermal comfort, than the use of a conventional convection-based ASHP system. Furthermore, compared to using a Kang-based heating system, a more uniformed bed surface temperature may be obtained when using a B-ASHP system. Nonetheless, although currently the prototype experimental B-ASHP system can be satisfactorily operated, a number of issues related to the designs of a B-ASHP system such as choices of refrigerant, refrigerant tube layout optimizations, and the use of variable speed compressors for capacity control, should be carefully considered to further improve its operational safety and energy efficiency. [ABSTRACT FROM AUTHOR]