Search

This paper investigates experimentally the cooling performance of a concept, where the radiant ceiling is suspended from the hollow-core concrete slab and by ventilation supply in the plenum and the perforations of the ceiling tiles, ventilation air is distributed without ducts and air terminals to the occupied zone. Literature has proven that this concept allows for more streamlined installation procedures and excellent performance in terms of thermal comfort and draught. The paper reports experimental results from a climate chamber, where the concept was tested under both steady-state and quasi-steady conditions. The steady-state conditions were chosen to map the cooling performance with different air change rates, and different ventilation and water supply temperatures. The results showed that for air change rates of 3 h−1 in the occupied zone and water supply temperature of 17 °C, the cooling output from the ceiling increased by 10 %. The concept was also tested under quasi-steady conditions in a 48 h cycle to quantify the thermal buffering effect of the exposed upper concrete slab when subjected to ventilation supply air. The effect amounted to 11–12 % increased cooling capacity at the end of the working day when the driving temperatures between air, water and thermal zones were at their maximum. [ABSTRACT FROM AUTHOR]

To date, religious facilities have received little attention in the published literature regarding energy use and efficiency. With unique operating and building characteristics, these buildings have distinct opportunities for analysis in regards to building energy use and occupant comfort. With overall lower average energy intensity, religious facilities rarely receive energy assessments or are operated by experienced personnel. Therefore, identifying common issues is critical for training church owners in energy efficiency. This paper presents an in-depth analysis of heating, ventilation and air conditioning (HVAC) systems and occupant comfort in two religious facilities. The analysis reveals that the largest opportunities for reduction in energy use come from proper maintenance and operation of HVAC equipment and schedules. Temperature setbacks are shown to be an important operational setting to reduce energy usage. An accompanying analysis on thermal comfort reveals that temperature setbacks must be coupled with sufficient preconditioning of the space to ensure occupant comfort during intermittent building occupancy. An analysis of CO 2 levels in the building during occupancy reveals the need for sufficient outside air to meet ventilation standards. [ABSTRACT FROM AUTHOR]

Model predictive control (MPC) has been studied in the building science realm for about three decades. However, the following two aspects of the building control have not been studied thoroughly in MPC research. One is the impact of the mixed-mode cooling system on the active heating ventilation and air conditioning (HVAC) energy consumption, and the other is the differences of individual thermal comfort preference and its impact on energy. This paper proposes an occupant-oriented mixed-mode EnergyPlus predictive control system to optimize HVAC energy consumption while meeting the individual thermal comfort preference. A web-based dashboard is implemented in the test-bed building for three months to collect individual thermal comfort preference data. The data analysis results suggest that occupants have various tolerances and preferences about thermal comfort. The simulation results show that, during one week of a typical swing season, the mixed-mode system further reduces the active HVAC energy consumption, and the diversified occupant thermal comfort preference has significant impact on HVAC energy consumption. [ABSTRACT FROM AUTHOR]

In buildings, HVAC systems consume a high amount of energy to provide thermal comfort for occupants. A methodology is presented in this paper to control thermostat operation of the buildings considering the effects of indoor and outdoor boundary conditions and phase change material (PCM) characteristics. EnergyPlus v8.1 building energy simulation software was used to analyze the energy performance of the PCM incorporated building models and to implement Fanger model to control HVAC thermostat operation according to BS EN 15251:2007 thermal comfort categories. Three types of building HVAC schedule, PCM with different melting points and layer thicknesses were studied for Madrid climate zone. Moreover, the impact of occupants clothing on the energy consumption was investigated. Furthermore, payback analysis was conducted to find out the economic benefits of PCM integration into the building envelopes. Application of PCM improved the cooling and heating energy performances except for the office model in winter (heating period). Additionally, higher energy savings and lower payback periods were observed when PCM with higher melting point was applied to the buildings. Eventually, energy savings in PCM incorporated models were found to improve further when occupants changed their clothing behavior in winter. [ABSTRACT FROM AUTHOR]

Phase Change Materials (PCM) technology can be used for thermal storage and peak load shaving. This paper presents the optimization study of a PCM-Air heat exchanger as well as the development of load shifting solutions which take into account the thermal comfort of the occupants and the indoor air quality. The exchanger contains macroencapsumated PCM (paraffin) and is conceived in a way that facilitates its integration in a ventilation system. It is aimed to shift space heating electrical consumption from peak to off-peak period. The study is performed using an experimentally validated numerical model based on the heat balance approach and the apparent heat capacity method. Several parameters were investigated during the optimization processes, including heat exchanger dimensions, PCM quantity and properties, seeking the configuration with the optimal compromise between stored heat and the time needed for the charging/discharging process. The numerical model was coupled to a building simulation model with several control strategies investigating different scenarios over a one- month winter period. The scenarios vary with increasing complexity, first considering load shifting and thermal comfort, then adding the final price of electricity consumption and finally taking into account the indoor air quality. [ABSTRACT FROM AUTHOR]

Abstract: HVAC energy savings have been a key focus of recent building energy management efforts, but the savings typically reduce thermal comfort for building occupants. Established thermal comfort models use complex and person-specific parameters, such as clothing insulation and metabolic rate, to predict individual comfort levels, making the design of automated comfort modelling systems a highly challenging endeavour. In this paper, we investigate the use of humidex, which encapsulates both temperature and humidity, as an easily measurable and highly representative indoor thermal comfort predictor. We verify the feasibility of humidex as an indoor thermal comfort predictor by contrasting its performance to that of the best feature set (the feature set that best predicts the thermal comfort) constructed jointly by recursive sequential forward selection and support vector regression. The analysis using the global datasets, including data from seven climate zones across three continents, shows that humidex is a favourable and easily measurable indoor thermal comfort descriptor when humidity is significant. We take away the message from the analysis and design, develop, and deploy a system that couples a deployment of sensor nodes in an office environment, where each node collects the ambient temperature and humidity at each person's desk, and an automated survey mechanism to record people's thermal sensation votes. We use subjective response through the surveys as ground truth to validate the performance of the thermal comfort prediction using humidex. The results confirm our analysis of global datasets and show that humidex is a good predictor of indoor thermal comfort at high humidity. [Copyright &y& Elsevier]

Abstract: In heating mode, fresh air is still essential for a chilled panel system in order to ensure the indoor air quality. In this paper, a chilled ceiling panel system was designed and built in a typical office room. The thermal environment and thermal comfort in the room were fully measured and evaluated by using the Fanger''s PMV–PPD model and the standard of ISO 7730 respectively, when room was heated in two modes, one of which is the chilled panel heating mode and the other of which is the combined heating mode of chilled panel and supply air. The research results indicate that in the combined mode, ceiling ventilation improves the general thermal comfort and reduces the risk of local discomfort. Under the condition of same general thermal comfort, the heating supply upper limit of chilled panel can be increased by 12.3% because of air mixing effect caused by introduction of air ventilation. [Copyright &y& Elsevier]

Abstract: This paper presents a detailed meta-analysis of end and primary energy use for heating, cooling and ventilation of 11 low-energy non-residential buildings and one residential building in Germany that belong to the EnOB research program launched by the German Federal Ministry for Economy. In particular, the analysis emphasizes the substantial impact of auxiliary energy use on the efficiency of heating and cooling performance. The investigated buildings employ environmental energy sources and sinks – such as the ground, ground water, rainwater and the ambient air – in combination with thermo-active building systems. These concepts are promising approaches for slashing the primary energy use of buildings without violating occupant thermal comfort. A limited primary energy use of about 100kWhprim/(m2 neta) as a target for the complete building service technology (HVAC and lighting) was postulated for all buildings presented. With respect to this premise, a comprehensive long-term monitoring in high time resolution was carried out over the course of two to five years, with an accompanying commissioning of the building performance. Measurements include the energy use for heating, cooling, and ventilation, as well as the auxiliary equipment, the performance of the environmental heat source and sink, and local climatic site conditions. [Copyright &y& Elsevier]