Search

Highlights • The aim of this research is to investigate the thermal performance of the prototype building to assess overheating in the summer, particularly the long-term heatwave period in the UK. • To understand the impact of energy efficient technologies on occupants' wellbeing and health in order to identify occupants' thermal comfort level in these types of dwellings. • The study adopts a quantitative research design based on indoor monitoring, in-situ measurements and dynamic simulation modelling. • This clearly indicates that due to this prototype house's structural construction material behaviour in a heatwave and its location (southwest facing orientation), it is susceptible to very high overheating risk. • The results found from the monitoring during a long-term heatwave in the summer of 2018 provided strong evidence for overheating and thereby thermal discomfort in many occupied spaces, particularly on the first floor followed by several spaces on the ground floor. Meanwhile, all the occupied spaces appeared to be well above the acceptable thermal comfort benchmark throughout the data collection period. • To calibrate the building performance, as well as the building materials and components adopted in the model, the measured indoor environment data were scrutinised in conjunction with the IES simulation results. Abstract There is growing evidence that terraced houses—thermally lightweight, well insulated, naturally ventilated with three exposed wall surfaces—are at risk of overheating, especially in south-eastern England. The aim of this study is to evaluate the building performance and develop a reliable building simulation, which will be employed in the second phase of the study: developing affordable and feasible passive design strategies to support the energy-efficient building systems of the construction industry. This paper reports on the results from the first phase of the study where a quantitative methodology, including indoor and outdoor environmental monitoring, in-situ measurements and building simulation modelling, was adopted. The performance of a case study was modelled and simulated via employing Integrated Environmental Solutions (IES) software suite. The results from the base-case were analysed according to the adaptive thermal comfort of Chartered Institution of Building Services Engineers (CIBSE) Technical Memorandum 52 guidelines: The Limits of Thermal Comfort—Avoiding Overheating in European Buildings. The spaces studied within the case study house were observed to exceed the acceptable limits of thermal comfort; particularly, the large bedroom within this zone exceeded the upper limit for overheating up to 11 h daily. Furthermore, the results from the monitoring study indicate a high risk of summertime overheating across all the case study settings, especially during short-term peaks in outdoor temperatures. The main reasons for the problematic thermal performance were identified as well-insulated and fully air-tight building fabric, the lack of sufficient ventilation through the living spaces and excessive heat gains through the composite cladding material. [ABSTRACT FROM AUTHOR]

Occupants account for a significant impact on building performance through their interactions with zone level building components. Empirically-derived occupant models, despite their potential to represent occupants’ impact in building performance simulation (BPS), have minimal penetration in design and code compliance processes. Instead, occupants are represented with static schedules or simple deterministic triggers. The objective of this paper is to better understand the influence of assumptions made in representing occupant interactions with building components over a BPS model's energy use and comfort predictions, as well as their ability to promote better design decisions. To this end, the energy and daylight performance of a generic perimeter office space in Ottawa, Canada were evaluated using a set of comprehensive performance metrics. Results indicate that representing dynamic occupant–building interactions lead to different energy predictions from the static schedules. The maximum difference in the total electricity use was for window-to-wall area ratios (WWR) of 20%, which was about 30% higher with the stochastic cases than the blind-open static cases. WWR 60% and 40% generally yielded the lowest lighting electricity use with the static and stochastic cases, respectively. This paper emphasizes the importance of incorporating empirically-derived dynamic occupant models for simulation-aided design and code compliance. [ABSTRACT FROM AUTHOR]

This paper introduces a Human and Building Interaction Toolkit (HABIT) for simulating the thermally adaptive behaviors and comfort of office occupants alongside building energy consumption. The toolkit uses the Building Controls Virtual Test Bed (BCVTB) to co-simulate a field-tested, agent-based behavior model with an EnergyPlus medium office model. The usefulness of the toolkit is demonstrated through a series of zone and building-level case study simulations that examine the wisdom of pairing local heating and cooling options with strategic thermostat set point offsets, judging from the energy, Indoor Environmental Quality (IEQ), and cost perspectives. Results generally suggest that trading efficient local heating/cooling options for whole space conditioning has both energy and comfort benefits, saving up to 28% of monthly HVAC energy while improving the acceptability of thermal conditions in a Philadelphia climate. Nevertheless, cost analysis shows that the fuel source of conserved energy must be considered – particularly in the case of personal heater use, which adds to electric plug loads and associated utility and CO 2 emissions cost penalties. Moreover, costs from even small changes in simulated occupant productivity tend to overwhelm energy costs, suggesting the need to improve the accuracy and precision of available productivity models across multiple seasons and climates. [ABSTRACT FROM AUTHOR]

The use of cool materials for heat island mitigation has gained a lot of interest during the past few years. Cool materials are characterized by high solar reflectance and infrared emittance values. To maximize cooling energy savings, high albedo roof coatings should maintain the above properties for the service life of the coating. The aim of the present paper is to analyze the weatherisation of the cool roofs in two buildings in Athens Greece. The optical properties of the aged and new cool roofs are measured and compared. The impact of ageing in the two buildings’ energy performance is estimated. A mineralogical analysis is performed in order to quantify the deposition of pollutants on the cool roofs’ surface. In addition, a series of microbiological tests are implemented to reveal the impact of ageing and weatherisation in health. In both school roofs the surface temperature has a significant decrease between the part of the existing cool coating and the application of the new part with a temperature difference reached reaching 7–12 K. [ABSTRACT FROM AUTHOR]

Since some years, dense cities and compact buildings are promoted as sustainable and energy efficient designs. Nevertheless, urban planning strategies should take into account the interactions between buildings and the microclimate because the Urban Heat Island (UHI) phenomenon can increase the cooling load of buildings and is strongly influenced by urban morphology, urban landscaping and the thermal properties of buildings and soil. The modification of these parameters, such as building density, can mitigate UHI, with direct and indirect improvement of building energy performances. The case study presented in this paper concerns a new district in La Rochelle (France) named Atlantech. Currently at the design stage, the goal is to transform this old military camp into a zero carbon district. This study was performed in parallel with urban planning using EnviBatE and SOLENE-Microclimate simulation. Two building densities are compared through the impacts on solar irradiance, wind airflows, building indoor temperatures and energy demand. Analysis of reference and densified district highlights various impacts such as the wind velocity decrease, up to 80%, and the effect on an existing nearby building solar irradiation, reduced by 7%. These results underline the potential usefulness of these simulation tools for urban planners at the design stage. [ABSTRACT FROM AUTHOR]

Occupant behavior is now widely recognized as a major contributing factor to uncertainty of building performance. While a surge of research on the topic has occurred over the past four decades, and particularly the past few years, there are many gaps in knowledge and limitations to current methodologies. This paper outlines the state-of-the-art research, current obstacles and future needs and directions for the following four-step iterative process: (1) occupant monitoring and data collection, (2) model development, (3) model evaluation, and (4) model implementation into building simulation tools. Major themes include the need for greater rigor in experimental methodologies; detailed, honest, and candid reporting of methods and results; and development of an efficient means to implement occupant behavior models and integrate them into building energy modeling programs. [ABSTRACT FROM AUTHOR]