Search

In Germany, policy-induced energy efficiency improvements typically aim at reducing primary energy consumption. Private households, on the contrary, pursue the maximization of wellbeing or, in microeconomics jargon, the maximization of utility of the occupants. There is a marked difference between upfront-calculated energy performance ratings (EPRs) and actual heat energy consumption (HEC). From an energy and environmental policy point of view, deviations of energy consumption from ex ante calculated EPRs is problematic, as it jeopardizes their usefulness for (prospective) homeowners, policy-makers and researchers relying on EPRs as a guidance. The EPR-HEC gaps reported are, apart from deviations from the mean aggregate values (i.e. heterogeneity), often attributed to anticipated or unanticipated behavioral effects. From an energy economist's point of view, energy rebound induced by lowered costs per unit of energy service due to increased energy efficiency is one explanation. The related literature almost entirely treats building-specific EPRs as universal standards, trying to explain the empirically observed discrepancies. In this paper, we investigate to what extent the current EPR scheme in place in Germany today can address behavioral issues. To this end, based on two different multi-family housing data sets for Germany and regression analysis, we empirically investigate the deviations between EPRs used in the regulatory norms and the HEC levels observed in reality. We find evidence that it is not necessarily the behavioral dimension, but rather the static and mostly technically guided calculation of the EPRs itself that accounts for the major part of the deviations. We conclude that there is indeed a need for further improvements in the field of EPR regulation and methodology. [ABSTRACT FROM AUTHOR]

The Solar Decathlon is a competition for universities from all over the world which focuses on designing, building and operating experimental, solar-powered houses. Participating in the project offers universities a unique and interdisciplinary platform for teaching, learning and research which combines practical experience with research. In 2022, the European edition was held in Germany for the first time. The event took place with a new urban profile to increase both the relevance of the competition and the learning experience. Its main topic was the further development of the European city, and specifically focused on the existing stock of residential apartment buildings. A total of 18 teams from 11 countries with over 500 students took part, with 16 teams ultimately building their houses on a shared solar campus. Demonstrating a balanced or a positive energy balance in practice was one of the essential goals of the competition. This was achieved by 13 of 15 projects in the energy contest. The prerequisites for this were a high level of energy efficiency and the consistent use of solar energy. Both strategies were embedded in convincing architectural concepts. These ranged from the minimised visibility of standard systems on rooftops, through to custom-built systems with full architectural integration in façades. Hybrid solar systems also became a focus, with the goal of making optimum use of the surfaces on the building envelope. This paper focuses on the energy engineering and technical and architectural integration of the solar systems. It also includes the results achieved in the competition linked to the learning experience. [ABSTRACT FROM AUTHOR]

Zero Energy Buildings (ZEBs) are considered as one of the key elements to meet the Energy Strategy of the European Union. This paper investigates cost-optimal solutions for the energy system design in a ZEB and the subsequent grid impact. We use a Mixed Integer Linear (MILP) optimisation model that simultaneously optimises the building’s energy system design and the hourly operation. As a ZEB have onsite energy generation to compensate for the energy consumption, it is both importing and exporting electricity. The hourly time resolution identifies the factors that influence this import/export situation, also known as the building’s grid impact. An extensive case study of a multi-family house in Germany is performed. The findings show that the energy system design and the grid impact greatly depend on the ZEB definition, the existing policy instruments and on the current energy market conditions. The results indicate that due to the feed-in-tariff for PV, the cost-optimal energy design is fossil fuelled CHP combined with a large PV capacity, which causes large grid impacts. Further, we find that heat pumps are not a cost-optimal choice, even with lower electricity prices or with increased renewables in the electric power system. [ABSTRACT FROM AUTHOR]

• Linking top-down energy efficiency indicator analysis with bottom-up policy analysis. • Explaining the contribution of energy efficiency policies in Germany and Switzerland. • Analysing the counteracting effects to energy policy of rebound and non-compliance. This paper studies the factors underlying the evolution of the energy consumption for space heating in residential buildings by linking top-down analysis, based on meso -indicators, and bottom-up analysis, based on policy evaluations. The top-down analysis (i.e. the perspective from energy statistics) allows one to separate the change in total energy use into activity level, societal factors and energy efficiency gains. The explanatory power of the resulting meso-(statistical) indicators is often limited, if the underlying factors are not examined (e.g. changes in heating levels and patterns, weather effects, cost of energy and policies regarding insulation and heating system standards). We overcome most of these drawbacks by conducting a bottom-up analysis (i.e the perspective from single policy measures), which enables us to discern the contribution of energy efficiency policies to the changes observed with the meso -analysis. We focus on space heating consumption in the residential sectors for Germany and Switzerland. A major aim of this analysis is to show the contribution of energy efficiency policies (such as thermal building regulation, subsidy programmes, fiscal measures etc.) towards the changes in this indicator. The results show that the progress in energy efficiency (both autonomous and policy induced) in both countries had the greatest effect (-776 PJ for Germany, −42 PJ for Switzerland) regarding the change in energy consumption for space heating in the period from 2000 to 2016. However, the impacts of "technical and comfort" rebounds (+436 PJ for Germany, N/A for Switzerland) and other developments such as societal changes (+316 PJ for Germany, +35.5 PJ for Switzerland) were found to compensate for a significant part of the energy efficiency gains. In both countries, it was possible to link physical energy efficiency indicators to policy evaluation, but limitations were also identified which are primarily related to data gaps. [ABSTRACT FROM AUTHOR]

• A new retrofitting strategy by using prefabricated elements window machine. • Minimization of the renovation costs and speeding up the retrofit action. • A potential in energy saving and improving the Indoor Environment Quality. • Further significance in retrofit and healthy home office working environments. The renovation of existing residential buildings across Europe has become a key factor for energy saving and the improvement of Indoor Environment Quality (IEQ). This paper presents an investigation of IEQ for a typical 1960s single-family house in Germany before and after a new retrofitting strategy (prefabricated element with integrated ventilation and new thermal envelope). In-situ measurements were applied to investigate the energy efficiency and IEQ improvement for the new retrofitting strategy in temperate winter regions of Europe. The simulation model replicates the measured data to be closer to reality and simulates a home office (COVID-19) scenario. The in-situ measurements showed that our retrofitting strategy increases the indoor air temperature during the heating period by up to 2.5 °C, decreases relative humidity by up to 3.8% and increases CO 2 by up to 24 ppm than before. As the simulation results shows, the retrofitted home office scenario allows a reduction in heating energy of up to 77%, an increase in CO 2 concentration of up to 41.8 ppm, 0.5% less relative humidity and 1.6 °C higher indoor air temperature than that without retrofitting. The new approach to retrofit residential buildings thus showed a potential in energy saving and improving the IEQ. [ABSTRACT FROM AUTHOR]

• A novel metric (DOC) for bidirectional low temperature networks (BLTNs). • DOC describes the balancing potential of heating and cooling demands in a district. • DOC helps to identify building clusters with complementary demand profiles. • Correlations between DOC and KPIs are elaborated based on 63 demand scenarios. • Performance comparison of BLTNs with state-of-the-art building energy systems. Bidirectional low temperature networks (BLTNs) are a promising technology to drive decarbonization of the heating and cooling sector. The energy efficiency of a BLTN strongly depends on the heating and cooling demands of the connected buildings and their simultaneity. In order to evaluate the efficiency of a BLTN, a novel metric, called Demand Overlap Coefficient (DOC), is presented in this paper. The DOC can be calculated for individual buildings or a district and describes which proportion of heating and cooling demands can be balanced inside buildings and between buildings. The DOC is calculated with time series for heating and cooling demands, taking special account of their simultaneity. For a real-world use case in Germany, it is shown that 25% of heating and cooling demands can be balanced in buildings and 45% can be balanced by the BLTN between buildings. The DOC is evaluated for 63 demand scenarios. Correlations show that for districts with a DOC larger than 0.45, BLTNs have lower annualized costs than a state-of-the-art heating and cooling system. BLTNs have higher exergy efficiencies for districts with DOCs larger than 0.3. With the derived correlations, the DOC serves as a practical metric in the planning process of BLTNs in order to identify and assemble building clusters with complementary demand profiles. [ABSTRACT FROM AUTHOR]