Search

Concerning the building environment HVAC facilities, even if a great effort has been made in developing components and systems with high nominal efficiencies, less attention has been paid to the problem of system maintenance. The main objective of the thermoeconomic diagnosis is to detect possible anomalies and their location inside a component of the energy system. The second objective, and indeed the one to be achieved in this paper, is indicated as inverse problem. It is associated with the quantification of the effects of anomalies in terms of thermoeconomic quantities. Its rigorous application in building thermal installations has some difficulties relating to the strong interrelation between the different components and the fact that energy supply facilities are continuously changing with time. The way to deal with dynamic circumstances is thoroughly explored in this article. Likewise, this paper’s main goal is to demonstrate an application of two thermoeconomic diagnosis methodologies in the building sector, one based on the malfunction and dysfunction analysis and the other one based on the characteristic curves of the components. The results obtained allow us to point out the advantages and limitations of both methodologies as well as to combine them and then develop a more reliable diagnosis. [ABSTRACT FROM AUTHOR]

Current indoor thermal environment is usually automatically controlled based on a temperature set-point given by room occupants or building managers. However, investigation shows that many temperature set-points are far from the comfortable temperature range recommended by design handbooks. Such unreasonable temperature set-points will result in not only uncomfortable indoor thermal environment, but also waste of cooling or heating energy. The authors have proposed a methodology of satisfaction based control to take place of the traditional set-point based control. This paper describes the experimental comparison results between satisfaction based indoor thermal environment control and set-point based control. Two test-beds were set up and a series of experiments was conducted to compare control performances, user acceptances, user work performances and system energy consumptions of the set-point based and satisfaction based control. The comparison results show that the satisfaction based control can achieve more stable thermal environment. Both of the two control methods can get relatively high scores regarding user acceptance and work performance. There are no statistically significant differences for user acceptance and work performance between two control methods. However, satisfaction based control consumed 15.3% and 11.9% less energy at two test-beds respectively than set-point based control due to more reasonable temperature settings given by the satisfaction based control. [ABSTRACT FROM AUTHOR]

Solar energy has been widely introduced in the building market to provide electricity, heating and domestic hot water for a sustainable development. However, the low-density and the mismatch between energy supply and demand make appropriate its combination with thermal energy storage (TES) systems. The integration of these technologies (solar thermal and TES) in the building design is a key aspect to reduce energy consumption. Latent heat storage using phase change materials (PCM) presents an advantage in comparison to conventional sensible heat storage systems due to the required volume. In this context, an innovative system that integrates PCM inside the structural horizontal building component is presented in this paper. The slab consisted of a prefabricated concrete element with 14 channels filled with macro-encapsulated PCM which is used as a storage unit and a heating supply. In order to melt the PCM the system is coupled to a solar air collector. The prototype is tested in an experimental facility located in Puigverd de Lleida (Spain) where its thermal performance is evaluated under real weather conditions. This study demonstrates the high potential of the concrete slab on reducing the energy consumption compared to a conventional heating system. [ABSTRACT FROM AUTHOR]

Combined air heating and ventilation systems are often used in low energy buildings. However, operating these systems in the heating mode increases vertical air temperature gradient in rooms and can have negative effect on indoor air quality. The effectiveness of ventilation and personal exposure of the occupants to airborne pollutants generated at the floor level in rooms with the combined air heating and mixing ventilation was analyzed in this paper. The dispersion of pollutants was evaluated under three air distribution methods (in-ceiling four-way and one-way air supply, and high level wall grille air supply) and under three air change rates (1, 2, and 3 ach). Each of these cases were tested at the supply air temperature of +20 °C and +25 °C by performing CFD simulations and experiments in the full-scale test chamber. The results of the experiments showed higher inhaled concentration of the contaminants under the heating mode. The inhaled-to-ambient pollutant concentration ratio varied in the range of 1.05–1.41 under the ventilation mode and it rose up to 1.14–1.78 under combined air heating and ventilation mode. CFD predictions confirmed that pollutants generated at the floor level are entrained into convective boundary layer of the occupant in cases when vertical air temperature gradient was present. The personal exposure to pollutants released at the floor level can increase significantly when a HVAC system runs in the combined air heating and ventilation mode; this effect will not necessarily dissolve with the increase of the air change rate. [ABSTRACT FROM AUTHOR]