Search

Current indoor thermal environment is usually automatically controlled based on a temperature set-point given by room occupants or building managers. However, investigation shows that many temperature set-points are far from the comfortable temperature range recommended by design handbooks. Such unreasonable temperature set-points will result in not only uncomfortable indoor thermal environment, but also waste of cooling or heating energy. The authors have proposed a methodology of satisfaction based control to take place of the traditional set-point based control. This paper describes the experimental comparison results between satisfaction based indoor thermal environment control and set-point based control. Two test-beds were set up and a series of experiments was conducted to compare control performances, user acceptances, user work performances and system energy consumptions of the set-point based and satisfaction based control. The comparison results show that the satisfaction based control can achieve more stable thermal environment. Both of the two control methods can get relatively high scores regarding user acceptance and work performance. There are no statistically significant differences for user acceptance and work performance between two control methods. However, satisfaction based control consumed 15.3% and 11.9% less energy at two test-beds respectively than set-point based control due to more reasonable temperature settings given by the satisfaction based control. [ABSTRACT FROM AUTHOR]

• A new methodology to investigate the impact of thermal mass is defined. • The use of unrepresentative boundary conditions could lead to inaccurate conclusions. • High thermal mass helps to decrease and regulate the internal temperature. • High thermal mass could increase energy use in the summer and winter seasons. • Isolating thermal mass through internal insulation results in better energy performance than external insulation. Contradictory conclusions have been reported on whether thermal mass reduces or increases energy demand in hot and cold climates. A novel approach to measuring the impact of thermal mass on the building's energy consumption is presented. The method aims to better represent reality and applies two different control conditions simultaneously in a numerical model: the first condition, which has been used in past studies, adjusts the internal boundary condition based on the time duration of heating/cooling activation (simulating an occupancy pattern) and the second, which has not been used in past studies, adjusts the internal boundary condition based on both the time duration and the internal temperature (simulating an occupancy pattern and the thermostatic control system). When investigating the impact of thermal mass on the internal temperature in a scenario where no heat is transferred into the building, the high thermal mass outperforms the low thermal mass, showing a time-shifting effect, long time lag, and small decrement factor. However, when modelled using the method presented in this paper, high thermal mass results in greater energy consumption during summer and winter periods in Saudi Arabia. During transition seasons where temperature swings occur on either side of the indoor set-point temperatures, thermal mass reduces thermal transmission. The impact of thermal mass is also investigated for several climatic conditions in Saudi Arabia. Simulation results show that an internally exposed thermal massive wall section results in greater energy consumption when compared to a similar building with isolated thermal mass (i.e. insulated internally). This is due to the fact that even though the internal temperature inside the building is being cooled/warmed up to the set-point, the thermal mass continues to transfer heat that is absorbed by the building's fabric from/to the interior, placing a greater demand on the cooling/heating system. Over the course of a year, however, the impact of thermal mass is negligible when compared to other factors, such as the insulative properties of the building's fabric. [ABSTRACT FROM AUTHOR]