Search

This paper investigates the climate change impact on cooling energy consumption of office buildings in four major architectural climate zones in China. The results show that there are apparent differences in the responses of monthly or yearly cooling loads to climatic change in different climates. Dominant factors affecting monthly cooling loads change from dry bulb temperature (DBT) to wet bulb temperature (WBT) with the climate zones changing from severe cold to hot. The yearly cooling load was mainly afftectd by DBT in severe cold climate, whereas the WBT had the dominant effect in the other climates. With the continuous warming climate, the yearly cooling load did not rise significantly for any climate zone except for severe cold climate zone where cooling load had a significant increase ( p  < 0.01). More importantly, the cooling load showed a weak decrease in Guangzhou. These results suggest that different measurements for buildings cooling energy conservation should be made in different climate zones. The humidity effect should be fully considered to improve buildings energy efficiency, especially in the hot climate zones. The continuous increase of temperature in the future does not necessarily increase cooling loads of buildings in the cold, hot summer & cold winter and hot summer & warm winter climate zones, and change trendency of humidity in the future need to be considered to predict cooling energy consumption. [ABSTRACT FROM AUTHOR]

• Analyzed residents' thermal demand characteristics under the global climate change. • A new thermal comfort evaluation model of traditional dwellings was established. • The new thermal neutral temperature and comfort range of residents were proposed. • Different measures to improve the old and new types of dwellings were put forward. Global climate change has led to increased differences in the indoor thermal environment of traditional dwellings and residents' thermal adaptability, but quantitative research in this area needs to be updated and improved. In this paper, taking the old and new types of traditional dwellings of Guangfu Ancient City in Hebei province, China as the example, we first investigated the current situation of indoor thermal environment and thermal comfort characteristics of residents by means of subjective questionnaire survey and objective data measurement. The measured data showed that the average indoor temperature of old-type traditional dwellings in winter was far lower than the thermal comfort range of human body, and it was also higher than the relevant standard in summer. Secondly, we established a new thermal comfort evaluation model of traditional dwellings and proposed a new thermal neutral temperature of residents: old-type traditional dwellings (18.1 °C in winter and 27.1 °C in summer), new-type traditional dwellings (19.8 °C in winter and 25.7 °C in summer). Although the measured data showed that the thermal environment quality of the old-type traditional dwellings was poor, the residents had strong thermal adaptability. Finally, we put forward the different living performance improvement strategies of old and new types of traditional dwellings: The old-type traditional dwellings should focus on strengthening the thermal performance of the envelope structure, while the new-type traditional dwellings should solve the problem of low indoor humidity in winter. This research improves the evaluation system of human thermal comfort of dwellings in cold region of China, and provides a good case reference. [ABSTRACT FROM AUTHOR]

Seasonal variation of thermal comfort demands directly affects the energy needs for heating or cooling purpose. In previous studies, the differences of neutral temperatures between summer and winter were revealed, but the studies on the difference of human thermal adaption in transitional seasons are insufficient. To clarify this, this paper presents a year-long survey which was carried out in 505 residential buildings in six cities located in the Hot Summer and Cold Winter (HSCW) zone of China involving 11,524 subjects. Results show a significant difference of adaptive responses in different seasons, and a lag of behavioral responses behind climate change in transitional seasons is observed. Occupants not only adjust clothing insulation according to air temperature in different seasons, but also actively control indoor air movement, including closing/opening windows and using fans. The seasonal, monthly and daily neutral temperatures are studied, implying that occupants’ thermal experience has significant effect on their thermal comfort by behavioral, physiological and psychological paths. According to the comparative study, the running mean air temperature method and aPMV model are recommended in free-running space. The findings provide scientific evidence to the concept that dynamic thermal comfort temperature range should be considered in evaluation of indoor thermal environment. [ABSTRACT FROM AUTHOR]

The building envelopes are exposed to the hot-humid climate with high humidity in hot summer and cold winter zone (HSCW) of China. The moisture transfer may severely influence the conduction loads through exterior walls. In this paper, a coupled heat and moisture transfer model is developed and validated to investigate the thermal performance of exterior walls. The conduction loads through a typical exterior wall are used to evaluate the effect of moisture transfer on the thermal performance of exterior walls in HSCW zone of China. The results show that the peak cooling and heating loads are overestimated by 2.1–3.9% and 4.2–10.1%, respectively, when ignoring moisture transfer. In cooling season, the sum of the latent load accounts for 14.3–52.2% of the sum of the total load and the yearly latent load accounts for 4.9–6.1% of the yearly total load when considering moisture transfer. The total cooling, heating and the yearly load are underestimated by 9.9–34.4%, 1.7–4.0%, and 5.2–6.8%, respectively, when ignoring moisture transfer. The results indicate that ignoring moisture transfer causes significant discrepancy in predicting the conduction loads. A detailed model considering moisture transfer in building envelope is essential to accurately evaluate the building energy performance in HSCW zone of China. [ABSTRACT FROM AUTHOR]

• Halocarbon emissions in the building sector is increasing. • Non-Annex parties become bigger emitter instead of Annex parties. • Building sector accounts for more than half of global HFCs emissions. • Data sufficiency is key barrier for policy making. • Building cooling demand increase will push further halocarbon emissions. Estimates of the non-CO 2 greenhouse gas (GHG) emissions contributed by the buildings sector are necessary to evaluate this sector's potential for climate change mitigation. As data is lacking on fluorinated gases (F-gases) and hydrofluorocarbon (HFC) emissions from the buildings sector, this study aimed to estimate these emissions. First, the share of total global GHG emissions represented by buildings-sector emissions was estimated. Then, the HFC emissions of the buildings sectors in several countries (USA, EU, Japan, and China) are compiled. Next, based on necessary assumptions, global buildings-sector HFC emissions were estimated. Finally, this paper discusses implications for policy-makers. [ABSTRACT FROM AUTHOR]