Search

When modeling the energy performance of existing buildings, model calibration always serves as an essential and necessary step to ensure the accuracy and applicability of building models. Model calibration for detailed energy models, which is also known as calibrated simulation (CS), refers to the process of tuning model's input parameters to narrow down the mismatch between the simulation result and the real-monitored data of building energy consumptions. Two major problems of current CS are: (1) a successful calibration requires HVAC domain knowledge of modelers. (2) Traditional building calibration process is labor-intensive and time-consuming. To solve these problems, a normative energy modeling based quick auto-calibration approach is proposed in this study. This approach is able to reduce the modeling time and simplify the calibration procedures. Firstly, this paper demonstrates the working principles and the credibility of Normative Energy Modeling (NEM). Then, the methodology of the proposed quick auto-calibration approach is elaborated. The energy performance model of a large hotel located in Shanghai, China with NEM is used as a case study to investigate the effectiveness of the proposed quick auto-calibration approach. The simulation result of the case study suggests that the proposed approach can significantly simplify the procedures of model calibrations while still achieve a good accuracy specified by ASHRAE Guideline 14 [1]. Besides, the results further confirm that such method requires much less time and computational power for modeling, compared with other counterparts (e.g., “Autotune” calibration [2]). With the advantage of speed and accuracy, the auto-calibration proposed in this paper is promising to be applied in both engineering and research field. [ABSTRACT FROM AUTHOR]

Facing the challage of energy conservation and emission reduction in the building sector, most energy saving strategies of central heating only focus on the performance improvement of building envelope, ignoring the impact of energy use behavior. This paper proposed a building energy conservation strategy based on energy use behavior analysis, which provides a perspective for in-depth exploration of building energy conservation. After investigating a typical university in the northern China, the energy use behaviors were characterized and two different DeST energy consumption models before or after considering energy use behavior were established. By comparing the results calculated by these two models, the impact of energy use behavior analysis on building energy consumption was quantitatively analyzed. The results show that the heating energy consumption and carbon emission can be reduced by 23.28% and 23% respectively through the proposed strategy based on energy use behavior. Therefore, the analysis of energy use behavior can provide a theoretical basis for heating operators to make decisions on energy supply regulation. With central cooling and heating further popularizing in the future, the research methodology of this paper has more extensive reference value for energy conservation and emission reduction strategies in the building sector. [ABSTRACT FROM AUTHOR]

• Obtaining the optimal interpolation method for adjacent sites. • Proposing the method for revising meteorological data at city scale. • Verifying the accuracy of the method by energy consumption simulation. In the development process of building energy conservation design, the correct provision of local Typical Meteorological Year (TMY) data is a prerequisite and basic work to evaluate building energy consumption, which directly affects the fine use of outdoor data for building energy conservation. Based on the recorded and observed data of meteorological stations in China, the acquisition and correction methods of TMY were studied by mathematical statistics and target searching, and the building energy consumption simulation of urban office buildings was conducted to verify the accuracy of the method, including:(1) Reviewed the generation method for TMY and the acquisition of data.(2) Based on the existing TMY data, the best spatial interpolation method of adjacent stations is studied by using the standard deviation method, and the selection method of the best number of stations on a large regional scale is given.(3) An improved method of urban environment TMY is proposed. The dry bulb temperature and relative humidity of the building site are corrected to generate TMY under Urban Heat Island (UHI) effect. The research in this paper improves the coverage and accuracy of urban TMY data and supplies basic research support for building energy-saving designs. [ABSTRACT FROM AUTHOR]

Highlights • The first city-level building energy efficiency benchmarking system for China. • A model considering the influence of operation parameters on energy consumption. • A systematic methodology of building energy benchmarking is proposed. • The model is a valuable analysis support tool for building energy managers. Abstract The city-level public building energy efficiency benchmarking system has an important guiding value for building energy-saving work, especially for Beijing, with its high energy-consumption density and both long heating and air-conditioning periods. This paper analyzed the characteristics of large-scale office buildings in Beijing and gives a detailed description of the process of establishing a public building energy efficiency benchmarking system for large-scale office buildings in Beijing, China, including data investigation and verification, Energy Usage Intensity(EUI) calculation, determining independent and dependent variables, developing and testing the benchmarking model, and deriving the benchmarking rating table. Then the first city-level public office building energy efficiency benchmarking system in China is established based on 88 large-scale office buildings in Beijing. The results showed that the model's performance index R2 is 0.667 and gives a good representation. The process has a strong potential for replication for other cities in China and even for a national energy-consumption evaluation system. [ABSTRACT FROM AUTHOR]

This paper proposed a hybrid Logarithmic Mean Divisia Index (LMDI) model that decomposes the change of total energy consumption (TEC) in the building sector to three different dimensions: 1) key influencing effects that include area effect, structure effect, population intensity, value intensity, and energy intensity; 2) three phases that include material production, construction, and operation; and 3) geographically distributed regions. Then, the model was validated in China's building sector based on the data collected from 30 provinces during 2007–2015. The key findings show that: (1) the increased final energy consumption in the building industry accounted for 53.3% of that in China. (2) Building material production contributed the most (69.2%) to the energy changes, followed by building operation (29.6%) and construction (1.2%). (3) The change of TEC was attributed the most to the area effect (90.4%) and the energy intensity effect (42.4%). (4) Zhejiang, Jiangsu, Hubei, Hebei, Fujian and Shandong contributed the most (47%) to the increase of China's building energy use. These findings provide an insightful understanding of the building energy changes and also a quantifiable justification for making building-specific energy policies, which are discussed at the end of the study. [ABSTRACT FROM AUTHOR]

A novel wallboard with double layers shape-stabilized phase change materials (SSPCMs) for year round energy management was proposed. Its energy saving potential in five typical climate regions of China was studied. One office room integrated with double layers SSPCMs wallboard was used for simulation platform. The other normal office room with the same envelope and just without double layers SSPCMs wallboard was used as reference room. Studies were conducted to investigate the energy saving potential of double layers SSPCMs wallboard in five cities representing five typical climate regions of China, including severe cold region, cold region, hot summer and cold winter region, hot summer and warm winter region, mild region. The optimal melting temperature and corresponding thickness of SSPCMs wallboard in five representative cities were given when the energy saving potential reached maximal value. It concluded that the optimal melting temperature of internal SSPCM layer was effected by indoor air temperature and the optimal melting temperature of external SSPCM layer was effected by outdoor air temperature. The characteristic of optimal values in the five representative cities were given for reference in this paper. [ABSTRACT FROM AUTHOR]