Search

Passive Houses are buildings which provide comfortable indoor conditions at an extremely low heating and cooling load. The peak daily average heating and cooling loads are typically below 10 W/m 2 and annual useful energy demands are below 15 kW h/(m 2 a). The Passive House standard was originally developed in Germany. In this paper we show by hygro-thermal dynamic simulation that it is possible to realize residential Passive Houses in all of the world's relevant climate zones, represented here by Yekaterinburg, Tokyo, Shanghai, Las Vegas, Abu Dhabi, and Singapore. The window quality, insulation levels, and mechanical services all depend on the climate as well as on the building's shape and orientation. The resulting annual energy demand for space conditioning of the Passive Houses is 75 to 95% lower than that of a traditionally insulated building of the same geometry. In humid climates like Shanghai or Singapore, special attention must be paid to humidity aspects. In climates which are hot and humid all year long, the total useful energy demand for sensible and latent cooling may exceed 70 kW h/(m 2 a) even in a Passive House. Finally, it is shown that the architectural quality is not compromised by the Passive House requirements. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a detailed meta-analysis of end and primary energy use for heating, cooling and ventilation of 11 low-energy non-residential buildings and one residential building in Germany that belong to the EnOB research program launched by the German Federal Ministry for Economy. In particular, the analysis emphasizes the substantial impact of auxiliary energy use on the efficiency of heating and cooling performance. The investigated buildings employ environmental energy sources and sinks – such as the ground, ground water, rainwater and the ambient air – in combination with thermo-active building systems. These concepts are promising approaches for slashing the primary energy use of buildings without violating occupant thermal comfort. A limited primary energy use of about 100kWhprim/(m2 neta) as a target for the complete building service technology (HVAC and lighting) was postulated for all buildings presented. With respect to this premise, a comprehensive long-term monitoring in high time resolution was carried out over the course of two to five years, with an accompanying commissioning of the building performance. Measurements include the energy use for heating, cooling, and ventilation, as well as the auxiliary equipment, the performance of the environmental heat source and sink, and local climatic site conditions. [Copyright &y& Elsevier]