Search

Abstract: To maintain ultra-low particle concentrations, cleanrooms can require several hundred air changes per hour. These ventilation rates make cleanrooms 30–50 times more energy intensive than the average U.S. commercial building. There are an estimated 12millionm2 of cleanroom space in the U.S., consuming over 370PJ of energy each year. This paper explores opportunities to improve the energy efficiency of cleanrooms while maintaining or improving operating conditions. This paper documents the modeling of a 1600m2 cleanroom in upstate New York. The TRNSYS model includes TMY2 weather data; building geometry and material properties; empirical data on occupancy, lighting and process equipment; and sophisticated HVAC systems. The model was validated based on metered steam, chilled water and electricity usage. Under 8% error was achieved in all fields. Four strategies were simulated: a heat recovery system for exhaust air, resulting in an 11.4% energy reduction with a 2.7-year simple payback; solar preheating of desiccant dehumidifier regeneration air (2.4% energy reduction, 11.5-year payback); improved lighting controls (0.3% energy reduction, 1.5-year payback); and demand-controlled filtration (4.4% energy reduction, 3.1-year payback). Implementation of recommended strategies is predicted to save 9TJ, 862tonnes of CO2, and $164k annually. [Copyright &y& Elsevier]

Abstract: Energy efficiency in new building construction has become a key target to lower nation-wide energy use. The goals of this paper are to estimate life-cycle energy savings, carbon emission reduction, and cost-effectiveness of energy efficiency measures in new commercial buildings using an integrated design approach, and estimate the implications from a cost on energy-based carbon emissions. A total of 576 energy simulations are run for 12 prototypical buildings in 16 cities, with 3 building designs for each building-location combination. Simulated energy consumption and building cost databases are used to determine the life-cycle cost-effectiveness and carbon emissions of each design. The results show conventional energy efficiency technologies can be used to decrease energy use in new commercial buildings by 20–30% on average and up to over 40% for some building types and locations. These reductions can often be done at negative life-cycle costs because the improved efficiencies allow the installation of smaller, cheaper HVAC equipment. These improvements not only save money and energy, but reduce a building’s carbon footprint by 16% on average. A cost on carbon emissions from energy use increases the return on energy efficiency investments because energy is more expensive, making some cost-ineffective projects economically feasible. [Copyright &y& Elsevier]