Search

Network temperatures in district heating systems are important operational factors for obtaining efficient performance. A low network return temperature allows for the recovery of low-grade heat from assets such as condensing boilers, waste incineration, geothermal sources and industrial waste heat. Fluctuations in heating and cooling demands affect the return temperatures of the building substations and in the network. This variability impacts the economic viability and environmental sustainability of the entire system. This paper presents a nonlinear optimization strategy to maintain sufficient energy flows in the network's primary and secondary circuits to achieve low return temperatures from all substations in the network. The defined optimization strategy incorporates the thermodynamic model of the substation and building heating system as opposed to traditional weather-based supply temperature adjustments. The estimated heat demands and tariffs, ▪ penalties are inputs used by the optimizer to find the optimal solution. The total operational expenditure for electricity and gas consumption shows an 18% reduction with 8% reduction in emissions and 6% efficiency improvement when compared with the measured weather-based approach. The developed strategy will aid the network operators in the economic dispatch of heat generation while ensuring the user's thermal comfort. • Achieving low network return temperature by optimizing energy flows at district heating substations. • Maintaining the primary and secondary sides mass flows by introducing the new factor. • Finding optimal network temperatures and flow rates by estimating energy demands of the buildings. • Improved network techno-economical and environmental performance and thermal comfort of consumer. [ABSTRACT FROM AUTHOR]

• A pre-1919 primary school with single glazing in Edinburgh has an oversizing of its space heating system of 32 % at design conditions. • Supply temperature can be operated below 70 °C all year round. • Supply temperatures can be reduced below 55 °C all year-round during daytime. As part of the decarbonization of its existing building stock the UK needs to replace gas boilers with heat pumps and low-temperature heat networks. Both technologies are efficient at supply temperatures of 55 °C, with a maximum of 70 °C for heat networks, when existing systems have been designed to operate at 82 °C. Most space heating systems are expected oversized and operate most of the year in part-load, which facilitate the temperature reduction, but little is known about the degree of oversizing. This paper uses the case study of a pre-1919 school in Edinburgh to evaluate the true oversizing of its heating system and its consequences on minimum supply temperatures. This building is still equipped with single glazing and is therefore a worst-case scenario. An oversizing of 32 % was estimated which enables the use of a supply temperature below 70 °C all year round. Moreover, the supply temperature can be kept below 55 °C all year round during daytime due to internal heat gains. In conclusion, this building shows a nascent readiness for low-temperature heat. It would benefit from energy efficiency measures such as double-glazed windows, but this is not pre-requisite. Those results are important for the heat network industry when sizing their systems, but also energy and asset managers when they schedule renovation programmes to have their buildings low-temperature-ready. [ABSTRACT FROM AUTHOR]

• Experimental campaign performed to test the operation of a return-to-supply bidirectional substation. • Hardware-in-the-loop technique coupling in real-time realistic thermal load and production profiles. • Detailed tests for representative days, three case studies and extended assessment for the entire year. • Daily district heating contribution ranging between 21% and 100%. • Yearly local production contribution reaches 100% of the user's load, considering the net-metering. The regulatory European and national policies outline the role of efficient district heating in achieving mid and long-term decarbonization targets. Prosumers could be equipped with bidirectional exchange substations to increase the local production contribution. The present paper evaluates the contribution of a bidirectional substation in maximizing the use of thermal energy produced locally by renewable sources or waste heat in a densely populated area, considering the limitation due to the non-contemporaneity of production and consumption and possibilities to overcome them. The substation prototype and the control system were tested in operational conditions, assuming the district heating network operating at two temperature levels (80 °C/50 °C and 60 °C/30 °C for supply and return) and applying the hardware-in-the-loop technique for coupling the substation in real-time with data-driven thermal loads (multi-family residential building) and production (solar panels and waste heat) profiles. The various energy flows in the substation are presented for representative days, resulting in a district heating contribution to the user's load ranging between 99.8 % (winter day) and 21.8 % (summer day). The net-metering mechanism was considered, and the assessment extended to the entire year. The local production contribution to the user's load ranges between 24 % and 100 %, depending on the system configuration considered. [ABSTRACT FROM AUTHOR]