Search

Most current building thermal codes impose upper limits to the predicted annual building energy demand for heating, ventilation and air conditioning. In the building design phase these predictions are obtained using thermal simulations with variable complexity. The simplest approach uses a single lumped thermal capacitance to model the high thermal mass building elements, combined with five thermal resistances (known as the 5R1C model proposed in EN ISO 13790 standard). This model is used by many European countries as the reference simplified methodology to assess overheating risk and calculate yearly building energy demand. This paper presents a successful extension of this model that allows for its application to the prediction of the internal air temperature of free-running buildings with double skin façades. The extension consists in an increased number of thermal resistances used to model the double skin façade zone. The extended model is validated using a set of detailed thermal measurements obtained in a free-running double skin test cell. For the case analysed the simplifications used in the RC model do not reduce the overall accuracy: the mean absolute error for room air temperature is approximately 1 °C, the same order of magnitude of more detailed EnergyPlus simulations (1.2 °C). [ABSTRACT FROM AUTHOR]

Most of the state-of-the-art building simulation programs implement models in imperative programming languages. This complicates modeling and excludes the use of certain efficient methods for simulation and optimization. In contrast, equation-based modeling languages declare relations among variables, thereby allowing the use of computer algebra to enable much simpler schematic modeling and to generate efficient code for simulation and optimization. We contrast the two approaches in this paper. We explain how such manipulations support new use cases. In the first of two examples, we couple models of the electrical grid, multiple buildings, HVAC systems and controllers to test a controller that adjusts building room temperatures and PV inverter reactive power to maintain power quality. In the second example, we contrast the computing time for solving an optimal control problem for a room-level model predictive controller with and without symbolic manipulations. Exploiting the equation-based language led to 2200 times faster solution. [ABSTRACT FROM AUTHOR]

Model predictive control (MPC) has been studied in the building science realm for about three decades. However, the following two aspects of the building control have not been studied thoroughly in MPC research. One is the impact of the mixed-mode cooling system on the active heating ventilation and air conditioning (HVAC) energy consumption, and the other is the differences of individual thermal comfort preference and its impact on energy. This paper proposes an occupant-oriented mixed-mode EnergyPlus predictive control system to optimize HVAC energy consumption while meeting the individual thermal comfort preference. A web-based dashboard is implemented in the test-bed building for three months to collect individual thermal comfort preference data. The data analysis results suggest that occupants have various tolerances and preferences about thermal comfort. The simulation results show that, during one week of a typical swing season, the mixed-mode system further reduces the active HVAC energy consumption, and the diversified occupant thermal comfort preference has significant impact on HVAC energy consumption. [ABSTRACT FROM AUTHOR]

In tropical countries such as India, increasing the roof albedo helps to reduce the heat ingress through the roof. This further reduces air-conditioning energy consumption in conditioned buildings and increases comfort in unconditioned buildings. In order to help users determine the benefits of high albedo roofs under varying conditions, a simple calculator has been developed. Parameters such as location, building type, roof area, and surface properties of the roof are taken as inputs. Annual EnergyPlus simulations are performed for the given parameters and the results are displayed in both graphical and tabular formats. It also calculates the simple payback by comparing a given base case roof albedo with the proposed roof albedo. The calculator can perform comfort simulations for unconditioned buildings and simulates measures including a radiant barrier system and under deck roof insulation. The calculator also runs a parametric simulation between insulation thickness and roof albedo to find an optimum roof insulation thickness based on incremental internal rate of return. This paper presents the features of the cool roof calculator and the type of analysis that can be performed using the cached results. [ABSTRACT FROM AUTHOR]

In this paper, measures such as planting urban greenery and using high-albedo paint to mitigate the urban heat-island effect, conserve energy, and reduce CO 2 emissions were assessed. As a typical energy-saving method for buildings, reducing the internal heat sources and increasing the insulation are also assessed. We used a coupled urban canopy and building energy model to predict the heat loads of buildings in city districts, the effects of air-conditioning on energy consumption, and air temperature changes. In this model, a vertical one-dimensional local atmospheric model is coupled with an air-conditioning load calculation model for buildings, making it possible to assess the interaction between anthropogenic heat release due to air-conditioning usage and the outside thermal environment. In this study, we selected a target study region in the city of Kawasaki, Japan. When typical city districts were assessed, planting greenery or increasing albedo achieved temperature reductions of 0.6–1.0 °C and 0.1–0.5 °C, respectively, and energy savings of 40–80 and 70–90 kJ/m 2 /day (per unit floor area) on a typical summer day. The results from the large-scale assessment show that urban greening or albedo increases achieved the highest energy savings, of up to 400 t-CO 2 /day, in the entire target study region. [ABSTRACT FROM AUTHOR]

Abstract: Many parameters have been used to evaluate the thermal performance of envelope wall/roofs, most of them for air-conditioned buildings. In this paper, the interest is focused on parameters to assess the thermal performance of envelope wall/roofs for non air-conditioned buildings. Five groups of parameters, some previously used and some newly proposed, have been analyzed. To test the evaluation parameters, numerical simulations of the periodic heat transfer through five different roof configurations have been carried out. This research shows the suitability of the energy transferred through the wall/roof during a day, the decrement factor, the discomfort degree hours, and the hot (or cold) thermal performance index to be used for thermal evaluation of wall/roofs in non air-conditioned buildings. The sensitivity of these parameters with climatic conditions and with the outdoor surface solar absorptance is analyzed. Additionally, it has been shown that the steady-state thermal transmittance, the thermal admittance modulus, the periodic thermal transmittance modulus, and the surface decrement factor, calculated with surface temperatures, are not suitable parameters to evaluate wall/roofs in non air-conditioned buildings. [Copyright &y& Elsevier]

Abstract: Presently the essential research trend for sustainable buildings is the use of renewable energy sources and the development of new techniques of energy storage. Phase change materials (PCMs) may store latent heat energy in addition to the typical sensible energy capacity of current building materials, allowing to store significantly more energy during the phase change process (solid to liquid and vice versa). The incorporation of PCMs into building envelope solutions takes advantage of solar energy, contributing to the overall reduction of energy consumption associated to use of the air conditioning systems. This paper presents and discusses research developed in two main components: experimental testing and numerical simulation of a building component with PCM incorporation. The main goal of the experimental testing carried out was to evaluate the effect of the incorporation of PCM macro encapsulated into a typical Portuguese clay brick masonry enclosure wall. It is evaluated the influence of the phase change process of the PCM over the attenuation and time delay of the temperature fluctuations for indoor spaces. The experimental results allowed the calibration and validation of the numerical model, enabling to carry out parametric studies with different PCMs quantity analysing consequent temperature damping and time delay. [Copyright &y& Elsevier]