Search

The use of cool materials for heat island mitigation has gained a lot of interest during the past few years. Cool materials are characterized by high solar reflectance and infrared emittance values. To maximize cooling energy savings, high albedo roof coatings should maintain the above properties for the service life of the coating. The aim of the present paper is to analyze the weatherisation of the cool roofs in two buildings in Athens Greece. The optical properties of the aged and new cool roofs are measured and compared. The impact of ageing in the two buildings’ energy performance is estimated. A mineralogical analysis is performed in order to quantify the deposition of pollutants on the cool roofs’ surface. In addition, a series of microbiological tests are implemented to reveal the impact of ageing and weatherisation in health. In both school roofs the surface temperature has a significant decrease between the part of the existing cool coating and the application of the new part with a temperature difference reached reaching 7–12 K. [ABSTRACT FROM AUTHOR]

Since some years, dense cities and compact buildings are promoted as sustainable and energy efficient designs. Nevertheless, urban planning strategies should take into account the interactions between buildings and the microclimate because the Urban Heat Island (UHI) phenomenon can increase the cooling load of buildings and is strongly influenced by urban morphology, urban landscaping and the thermal properties of buildings and soil. The modification of these parameters, such as building density, can mitigate UHI, with direct and indirect improvement of building energy performances. The case study presented in this paper concerns a new district in La Rochelle (France) named Atlantech. Currently at the design stage, the goal is to transform this old military camp into a zero carbon district. This study was performed in parallel with urban planning using EnviBatE and SOLENE-Microclimate simulation. Two building densities are compared through the impacts on solar irradiance, wind airflows, building indoor temperatures and energy demand. Analysis of reference and densified district highlights various impacts such as the wind velocity decrease, up to 80%, and the effect on an existing nearby building solar irradiation, reduced by 7%. These results underline the potential usefulness of these simulation tools for urban planners at the design stage. [ABSTRACT FROM AUTHOR]