Search

Highlights • The aim of this research is to investigate the thermal performance of the prototype building to assess overheating in the summer, particularly the long-term heatwave period in the UK. • To understand the impact of energy efficient technologies on occupants' wellbeing and health in order to identify occupants' thermal comfort level in these types of dwellings. • The study adopts a quantitative research design based on indoor monitoring, in-situ measurements and dynamic simulation modelling. • This clearly indicates that due to this prototype house's structural construction material behaviour in a heatwave and its location (southwest facing orientation), it is susceptible to very high overheating risk. • The results found from the monitoring during a long-term heatwave in the summer of 2018 provided strong evidence for overheating and thereby thermal discomfort in many occupied spaces, particularly on the first floor followed by several spaces on the ground floor. Meanwhile, all the occupied spaces appeared to be well above the acceptable thermal comfort benchmark throughout the data collection period. • To calibrate the building performance, as well as the building materials and components adopted in the model, the measured indoor environment data were scrutinised in conjunction with the IES simulation results. Abstract There is growing evidence that terraced houses—thermally lightweight, well insulated, naturally ventilated with three exposed wall surfaces—are at risk of overheating, especially in south-eastern England. The aim of this study is to evaluate the building performance and develop a reliable building simulation, which will be employed in the second phase of the study: developing affordable and feasible passive design strategies to support the energy-efficient building systems of the construction industry. This paper reports on the results from the first phase of the study where a quantitative methodology, including indoor and outdoor environmental monitoring, in-situ measurements and building simulation modelling, was adopted. The performance of a case study was modelled and simulated via employing Integrated Environmental Solutions (IES) software suite. The results from the base-case were analysed according to the adaptive thermal comfort of Chartered Institution of Building Services Engineers (CIBSE) Technical Memorandum 52 guidelines: The Limits of Thermal Comfort—Avoiding Overheating in European Buildings. The spaces studied within the case study house were observed to exceed the acceptable limits of thermal comfort; particularly, the large bedroom within this zone exceeded the upper limit for overheating up to 11 h daily. Furthermore, the results from the monitoring study indicate a high risk of summertime overheating across all the case study settings, especially during short-term peaks in outdoor temperatures. The main reasons for the problematic thermal performance were identified as well-insulated and fully air-tight building fabric, the lack of sufficient ventilation through the living spaces and excessive heat gains through the composite cladding material. [ABSTRACT FROM AUTHOR]

Abstract: In the tropics, daylighting from a side window requires shading to intercept direct sunlight from the window whilst allowing penetration of daylight from sky. In this paper, daylighting from a double-pane glazed window with enclosed horizontal slats (slat window) was investigated for which it is situated on either north or south wall of a room. Full-scale experiments and simulations were conducted to characterize distribution of the interior daylight from the slat window under a real tropical climate. Performance of the slat window was evaluated in terms of the “useful daylight illuminance” (UDI), interior daylight availability and light power density (LPD) of an integrated dimmable lighting system. Empirical formulas were developed for determining annual average LPD values of the dimmable lighting system over its served area. The LPD value can be used with a reduced form of the energy equation of Thailand's building energy code to evaluate the reduced annual electrical energy consumption for accreditation of the daylight use in a building. The analysis of life cycle cost proved that the daylighting from the slat window integrated with the dimmable lighting system is cost effective. [Copyright &y& Elsevier]

Abstract: Many parameters have been used to evaluate the thermal performance of envelope wall/roofs, most of them for air-conditioned buildings. In this paper, the interest is focused on parameters to assess the thermal performance of envelope wall/roofs for non air-conditioned buildings. Five groups of parameters, some previously used and some newly proposed, have been analyzed. To test the evaluation parameters, numerical simulations of the periodic heat transfer through five different roof configurations have been carried out. This research shows the suitability of the energy transferred through the wall/roof during a day, the decrement factor, the discomfort degree hours, and the hot (or cold) thermal performance index to be used for thermal evaluation of wall/roofs in non air-conditioned buildings. The sensitivity of these parameters with climatic conditions and with the outdoor surface solar absorptance is analyzed. Additionally, it has been shown that the steady-state thermal transmittance, the thermal admittance modulus, the periodic thermal transmittance modulus, and the surface decrement factor, calculated with surface temperatures, are not suitable parameters to evaluate wall/roofs in non air-conditioned buildings. [Copyright &y& Elsevier]

Abstract: Thermal mass combined with other passive strategies can play an important role in buildings energy efficiency, minimizing the need of space-conditioning mechanical systems. However, the use of lightweight materials with low thermal mass is becoming increasingly common. Phase Change Materials (PCMs) can add thermal energy storage benefits to lightweight constructions. There are many studies about the use of PCM in buildings, but there are still some difficulties for effective use and practical application of these materials. The study of applications used in real buildings could help us find solutions to these difficulties. This paper analyzed different PCM applications presented in highly efficient lightweight construction houses that have participated in the American Solar Decathlon, an international competition organized by U.S. Department of Energy. These houses have been tested and monitored in Washington DC, place with suitable climate conditions for short term thermal storage systems. The study started with a classification of the PCM applications and included an analysis of the systems, materials, switching temperatures, containments and design strategies used to improve the houses energy performance. Also, it included results of numerical simulations and experimentation that the participant team had done, complemented with information available in the literature about similar materials or applications. [Copyright &y& Elsevier]