Search

Abstract: In this paper a ray-tracing method is developed to describe the global solar transmittance of louver shading devices. The method is integrated in the dynamic building energy simulation program TRNSYS to assess the cooling demand and required peak cooling power in a south oriented office room. The proposed integrated approach allows calculating the solar transmittance for each time step. As the method is quite complex and requires an important computational effort, this research contrasts the results against the performance of simplified modeling and implementation approaches to assess the performance of louver shading devices. The use of view factor models not accounting for reflections in the shading device underestimates the cooling demand and the peak cooling power. It is shown that representing the shading device as a fixed reduction factor, independent of orientation and shading typology is an unacceptable simplification. However, the use of a simplified implementation of shading factors based on ray-tracing calculations is possible within acceptable margins of error. Best results are achieved by implementing solar radiation weighted monthly averages allowing to estimate the cooling demand and peak cooling power within 3%. [Copyright &y& Elsevier]

Abstract: An archetypal simulation model of office building representing variability in UK office building stock by parameterising built form, construction elements, occupancy/usage and operational/control strategy has been developed thus enabling detailed energy performance simulation to be used for stock modelling and parametric studies. The paper discusses the building characteristics needed to be considered for energy performance simulation, their values, and how they can be used in parametric studies. These parameters include built forms, fabrics (including thermal mass and insulation positioning), glazing percentages and characteristics, daylight and solar control measures and activity and operational related parameters (heating and cooling set points, ventilation rate, occupancy density and metabolic rate, equipment and lighting gain). The default parameter values suggested for the archetypal simulation model reflect typical existing and currently proposed UK office building stock. An archetypal model, combined with parametric studies, can be used in assessing energy performance of building stock and evaluating adaptation/retrofitting strategies. [Copyright &y& Elsevier]

Abstract: The building sector is an energy intensive sector, with great potential to reduce energy needs and environmental pollution. Several measures are being taken to increase the energy efficiency and avoid energy consumption in this sector. A recent trend is the nearly zero energy buildings, which was already adopted by some of the latest regulations, such as the 2010 recast of the European Performance of Buildings Directive (EPBD). However, to reach these goals, especially considering the existing building stock, new retrofit solutions are required, which must be well adapted to the specific building stock needs, and ensure that the building retrofit can achieve the nearly zero energy buildings standards. This paper presents a new prefabricated retrofit module solution for the facades of existing buildings, and also the steps taken to optimise its performance, which includes a judicious choice of materials, 3D modelling, cost–benefit analysis, use of different simulation tools for performance optimisation and prototyping. It is also shown the implementation of the retrofit module within an integrated retrofit approach, whose final goal was to obtain a building with the minimum possible energy consumption and greenhouse gas emissions. [Copyright &y& Elsevier]

Abstract: Many parameters have been used to evaluate the thermal performance of envelope wall/roofs, most of them for air-conditioned buildings. In this paper, the interest is focused on parameters to assess the thermal performance of envelope wall/roofs for non air-conditioned buildings. Five groups of parameters, some previously used and some newly proposed, have been analyzed. To test the evaluation parameters, numerical simulations of the periodic heat transfer through five different roof configurations have been carried out. This research shows the suitability of the energy transferred through the wall/roof during a day, the decrement factor, the discomfort degree hours, and the hot (or cold) thermal performance index to be used for thermal evaluation of wall/roofs in non air-conditioned buildings. The sensitivity of these parameters with climatic conditions and with the outdoor surface solar absorptance is analyzed. Additionally, it has been shown that the steady-state thermal transmittance, the thermal admittance modulus, the periodic thermal transmittance modulus, and the surface decrement factor, calculated with surface temperatures, are not suitable parameters to evaluate wall/roofs in non air-conditioned buildings. [Copyright &y& Elsevier]

Abstract: Thermal mass combined with other passive strategies can play an important role in buildings energy efficiency, minimizing the need of space-conditioning mechanical systems. However, the use of lightweight materials with low thermal mass is becoming increasingly common. Phase Change Materials (PCMs) can add thermal energy storage benefits to lightweight constructions. There are many studies about the use of PCM in buildings, but there are still some difficulties for effective use and practical application of these materials. The study of applications used in real buildings could help us find solutions to these difficulties. This paper analyzed different PCM applications presented in highly efficient lightweight construction houses that have participated in the American Solar Decathlon, an international competition organized by U.S. Department of Energy. These houses have been tested and monitored in Washington DC, place with suitable climate conditions for short term thermal storage systems. The study started with a classification of the PCM applications and included an analysis of the systems, materials, switching temperatures, containments and design strategies used to improve the houses energy performance. Also, it included results of numerical simulations and experimentation that the participant team had done, complemented with information available in the literature about similar materials or applications. [Copyright &y& Elsevier]

Abstract: Presently the essential research trend for sustainable buildings is the use of renewable energy sources and the development of new techniques of energy storage. Phase change materials (PCMs) may store latent heat energy in addition to the typical sensible energy capacity of current building materials, allowing to store significantly more energy during the phase change process (solid to liquid and vice versa). The incorporation of PCMs into building envelope solutions takes advantage of solar energy, contributing to the overall reduction of energy consumption associated to use of the air conditioning systems. This paper presents and discusses research developed in two main components: experimental testing and numerical simulation of a building component with PCM incorporation. The main goal of the experimental testing carried out was to evaluate the effect of the incorporation of PCM macro encapsulated into a typical Portuguese clay brick masonry enclosure wall. It is evaluated the influence of the phase change process of the PCM over the attenuation and time delay of the temperature fluctuations for indoor spaces. The experimental results allowed the calibration and validation of the numerical model, enabling to carry out parametric studies with different PCMs quantity analysing consequent temperature damping and time delay. [Copyright &y& Elsevier]