Search

Highlight • New on/off controller for residential applications validated using minute-level field data. • On/off controller improves the HVAC accuracy around 19% in terms of NMBE. • On/off cycling makes the operation and associated energy use more realistic. Abstract Heating, ventilation, and air-conditioning (HVAC) systems are sized using design conditions, conditions that occur only a small percentage of time each year. As a result, HVAC systems frequently operate at part-load conditions since their capacity is larger than necessary except in the most extreme weather conditions. Most HVAC systems for residential and small commercial buildings in the U.S. use on/off controls, however, most energy modeling software tools do not simulate the on/off nature of this type of HVAC controls. This paper presents the development and validation of an on/off controller for residential applications in EnergyPlus using a custom EMS (energy management system). This controller is validated using minute-level field data collected for a house located in Sacramento, California with simulated occupancy and internal loads. The results obtained from EnergyPlus with and without the use of the developed on/off controller are also compared. The application of the developed on/off controller improves the HVAC energy use results accuracy around 19% in terms of the Normalized Mean Bias Error (NMBE) at the one-minute level compared to the results without the application of the on/off controller. It also makes the nature of operation and associated energy use signal of the HVAC system more realistic in terms of the on/off nature of the residential direct expansion coils. Furthermore, in this paper, the accuracy improvement of the results dominated by the internal loads is investigated by applying the one-minute schedule compared to the usual hourly schedules for the internal thermal loads. [ABSTRACT FROM AUTHOR]

Model predictive control (MPC) has been studied in the building science realm for about three decades. However, the following two aspects of the building control have not been studied thoroughly in MPC research. One is the impact of the mixed-mode cooling system on the active heating ventilation and air conditioning (HVAC) energy consumption, and the other is the differences of individual thermal comfort preference and its impact on energy. This paper proposes an occupant-oriented mixed-mode EnergyPlus predictive control system to optimize HVAC energy consumption while meeting the individual thermal comfort preference. A web-based dashboard is implemented in the test-bed building for three months to collect individual thermal comfort preference data. The data analysis results suggest that occupants have various tolerances and preferences about thermal comfort. The simulation results show that, during one week of a typical swing season, the mixed-mode system further reduces the active HVAC energy consumption, and the diversified occupant thermal comfort preference has significant impact on HVAC energy consumption. [ABSTRACT FROM AUTHOR]

This paper quantifies green roofs energy savings which is a challenging topic, namely in Mediterranean climate with distinct heating and cooling seasons. The thermal behavior of a green roof case study in Lisbon, Portugal, was assessed through an experimental campaign during heating and cooling periods of the year of 2013. These experimental results were then used to calibrate a building energy simulation in EnergyPlus. After validation, the numerical model was used to compare the energy performance of intensive, semi-intensive and extensive green roofs. The three green roof types lead to similar heating energy needs but extensive green roof solution shows higher cooling energy needs than semi-intensive and intensive ones, of 2.8 and 5.9 times more, respectively. Furthermore, the performance of each type of green roof and different insulation properties was compared to traditional roof solutions. With no thermal insulation, extensive green roofs require 20% less energy use than black roofs and show a similar annual behavior than white roofs. Semi-intensive and intensive green roofs energy use is 60–70% and 45–60% lower than black and white roofs, respectively. Well insulated roofs do not take full advantage of evapotranspiration cooling effects, which is particularly noticeable when comparing with high reflective white roofs. [ABSTRACT FROM AUTHOR]