Search

This paper investigates factors associated with variation in daily total (electricity and gas) energy consumption in domestic buildings using linked pre-COVID-19 smart meter, weather, building thermal characteristics, and socio-technical survey data covering appliance ownership, demographics, behaviours, and attitudes for two nested sub-samples of 1418 and 682 British households selected from the Smart Energy Research Laboratory (SERL) Observatory panel. Linear mixed effects modelling resulted in adjusted R2 between 63% and 80% depending on sample size and combinations of contextual data used. Increased daily energy consumption was significantly associated (p -value < 0.05, VIF < 5) with: households living in buildings with more rooms and bedrooms, that are older, more detached, have air-conditioning, and experience colder (more heating degree days) or less sunny weather; households with more adult occupants, more children, older adult occupants, higher heating temperature setpoints, and that do not try to save energy. The results demonstrate the value of smart meter data linked with contextual data for improving understanding of energy demand in British housing. Accredited UK researchers are invited to apply to access the data, which has recently been updated to include over 13,000 households from across Great Britain. This paper provides guidance on appropriate methods to use when analysing the data. [ABSTRACT FROM AUTHOR]

Abstract: In this paper we undertake a comprehensive study to meet the building heating/cooling and power demand through a sustainable operation. We integrated polymer electrolyte membrane fuel cell (PEMFC) system and triple effect absorption refrigeration system (TEARS) for space cooling/heating and water heating applications in buildings. The analysis is carried out to observe the effects of different operating conditions on the efficiency of the fuel cell, output of the fuel cell and TEARS, and the utilization factor of the system. It is found that the efficiency, the utilization factor, and change in temperature of hot water increases from 36% to 48.8%, 49% to 86%, and 14K to 23K, respectively when the temperature of the cell is increased for different cooling loads and membrane thicknesses. In addition, the increase in membrane thickness affected the efficiency, the utilization factor, and change in temperature of hot water in a negative way and they were found to be decreasing from 47.3% to 42%, 85% to 49%, and 23K to 12K, respectively for different cooling loads. The water supplied to the house is obtained from a geothermal water source which makes the system more sustainable. [Copyright &y& Elsevier]

Abstract: A retrofit study was conducted in an unoccupied manufactured house to investigate the impacts of airtightening on ventilation rates and energy consumption. This paper describes the retrofits and the results of the pre- and post-retrofit assessment of building airtightness, ventilation, and energy use. Building envelope and air distribution systems airtightness were measured using fan pressurization. Air change rates were measured continuously using the tracer gas decay technique. Energy consumption associated with heating and cooling was monitored through measurement of gas consumption by the forced-air furnace for heating and electricity use by the air-conditioning system for cooling. The results of the study show that the retrofits reduced building envelope leakage by about 18% and duct leakage by about 80%. The reduction in the house infiltration rates depended on weather conditions and the manner in which the heating and cooling system was controlled, but in general these rates were reduced by about one third. The energy consumption of the house for heating and cooling was reduced by only about 10%, which is relatively small but not totally unexpected given that infiltration only accounts for a portion of the heating and cooling load. [Copyright &y& Elsevier]

Abstract: This paper reviews the annual energy and water performance of an aspiring low energy/carbon affordable housing development in southern UK, comprising 25 houses heated by a biomass fueled district heating network. Electrical, heat and water consumption data was collected for all dwellings and more detailed data logging was conducted on a sample of four. The data was analysed to benchmark the overall site performance and compare the individual dwellings. The individual dwellings performed efficiently in terms of electricity, heat and water consumption. Significant variation was identified between maximum and minimum consumers, even when typical performance correlates (i.e. number of occupants, floor area) were accounted for. Water consumption varies by a factor of > 7 and heat and electrical consumption by > 3 which, given the homogeneous design and specification of the buildings, suggested that occupant behaviour was important. Site-wide energy consumption and losses (over and above individual dwelling use) reduced energy and carbon emissions performance by 85% and 70% respectively. Although energy consumption in UK homes can be substantially reduced, the challenge for zero-carbon design is to address issues of total system performance, occupant behaviour and whole-building energy performance. [ABSTRACT FROM AUTHOR]

Abstract: Axiomatic design (AD) is a theory that helps to develop new design objects and allows one to evaluate the quality of designs. The aim of this paper is to apply this theory to the design of heat ventilation and air-conditioning (HVAC) systems and to come to conclusions about the design quality of some specific applications. The focus is the comfort and energy consumption in commercial buildings in South European climates. The discussion contains a brief description of variable air volume (VAV) systems and dedicated outdoor air systems (DOAS) with terminal units, such as fan-coils, induction units and chilled ceilings. Occasionally, the DOAS design should include over-cooled outdoor air in order to ensure an extra cooling means. According to the AD''s first axiom, ideal systems are independent or decoupled. Our conclusion is that VAV and DOAS with induction units are coupled designs, and on the other end, DOAS with fan-coils or chilled ceilings are decoupled designs. In addition, over-cooling outdoor air (OA) flow couples the OA flow with the indoor heat removable needs. [Copyright &y& Elsevier]