Search

In times of great transition of the European construction sector to energy efficient and nearly zero energy buildings (nZEB), a market observation containing qualitative and quantitative indications should help to fill out some of the current gaps concerning the EU 2020 carbon targets. Next to the economic challenges, there are equally important factors that hinder renovating the existing residential building stock and adding newly constructed high performance buildings. Under these circumstances this paper summarises the findings of a cross-comparative study of the societal and technical barriers of nZEB implementation in 7 Southern European countries. The study analyses the present situation and provides an overview on future prospects for nZEB in Southern Europe. The result presents an overview of challenges and provides recommendations based on available empirical evidence to further lower those barriers in the European construction sector. The paper finds that the most Southern European countries are poorly prepared for nZEB implementation and especially to the challenge/opportunity of retrofitting existing buildings. Creating a common approach to further develop nZEB targets, concepts and definitions in synergy with the climatic, societal and technical state of progress in Southern Europe is essential. The paper provides recommendations for actions to shift the identified gaps into opportunities for future development of climate adaptive high performance buildings. [ABSTRACT FROM AUTHOR]

Current indoor thermal environment is usually automatically controlled based on a temperature set-point given by room occupants or building managers. However, investigation shows that many temperature set-points are far from the comfortable temperature range recommended by design handbooks. Such unreasonable temperature set-points will result in not only uncomfortable indoor thermal environment, but also waste of cooling or heating energy. The authors have proposed a methodology of satisfaction based control to take place of the traditional set-point based control. This paper describes the experimental comparison results between satisfaction based indoor thermal environment control and set-point based control. Two test-beds were set up and a series of experiments was conducted to compare control performances, user acceptances, user work performances and system energy consumptions of the set-point based and satisfaction based control. The comparison results show that the satisfaction based control can achieve more stable thermal environment. Both of the two control methods can get relatively high scores regarding user acceptance and work performance. There are no statistically significant differences for user acceptance and work performance between two control methods. However, satisfaction based control consumed 15.3% and 11.9% less energy at two test-beds respectively than set-point based control due to more reasonable temperature settings given by the satisfaction based control. [ABSTRACT FROM AUTHOR]

Abstract: A traditional Chinese heating system, the Chinese Kang, is used by 175 million people in detached houses in the rural regions of China, especially in Northeast China. This system utilizes biomass such as corn stalks, straw, corncob and energy plants as the heat sources. The objective of this paper is to establish a set of models to simulate the energy performance of the Kang heating system in one Chinese detached house. An experimental field study was carried out to collect practical parameters in a newly constructed Chinese detached house. The dynamic performance of the Kang heating system was simulated by using IDA-ICE 4.0 embedded with an empirical model built in the field study. The results show that the simulation can obtain good overall agreement with the field measurement results. It was confirmed that the Kang model created by IDA-ICE 4.0 is capable of simulating the performance of the Kang system and of calculating energy consumption in the detached house. Moreover, the result reveals that the thermal environment in the present Chinese detached house is still poor during the severe cold season if only the Kang system is used to heat the whole house. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a detailed meta-analysis of end and primary energy use for heating, cooling and ventilation of 11 low-energy non-residential buildings and one residential building in Germany that belong to the EnOB research program launched by the German Federal Ministry for Economy. In particular, the analysis emphasizes the substantial impact of auxiliary energy use on the efficiency of heating and cooling performance. The investigated buildings employ environmental energy sources and sinks – such as the ground, ground water, rainwater and the ambient air – in combination with thermo-active building systems. These concepts are promising approaches for slashing the primary energy use of buildings without violating occupant thermal comfort. A limited primary energy use of about 100kWhprim/(m2 neta) as a target for the complete building service technology (HVAC and lighting) was postulated for all buildings presented. With respect to this premise, a comprehensive long-term monitoring in high time resolution was carried out over the course of two to five years, with an accompanying commissioning of the building performance. Measurements include the energy use for heating, cooling, and ventilation, as well as the auxiliary equipment, the performance of the environmental heat source and sink, and local climatic site conditions. [Copyright &y& Elsevier]

Abstract: The Chinese kang is an ancient integrated home system for cooking, sleeping, domestic heating and ventilation. It is still widely used today in nearly 85% of rural homes in northern China. In 2004, there were 67 million kangs used by 175 million people. Existing kang designs are mostly based on the intuition and accumulation of craftsman experience. There is a trend that Chinese kang is gradually replaced by bed and coal-burning radiators, domestic heating stoves, etc. using commercial energy. As rural building heating constitutes 25% of total building energy consumption in China, we consider that the transition and new technologies for rural home heating in northern China is crucial for managing future building energy consumption in China. This paper reviews the basic heat transfer and airflow principles of Chinese kang, as well as describing the traditional grounded kang and the relatively new elevated kang. The thermal performance of the kang is shown by data from literature and field surveys. The future of Chinese kang and research needs is also briefly discussed. There is also a need for scientific study in addition to experience accumulation, to form basis for engineering design. [Copyright &y& Elsevier]

Abstract: This paper reports on an analytical investigation into the energy saving potential associated with modified comfort limits in transitional spaces in buildings. Such spaces may not require the same high level and close environmental control of more fully occupied spaces and thus a wider variation in conditions and interpretation of thermal comfort may be permitted. Estimations are made of energy saving potential based upon typical floor area proportions utilised for transition spaces of various types in office/commercial buildings. The data are combined with suggested norms for comfort expectation that have wider temperature limits than for normally occupied office zones. The method has been applied to a series of building types situated in the climate of the East Pennines area of the UK using a thermal analysis tool. The results show that useful energy savings (particularly for heating) are possible by allowing for a modest (and realistic) relaxation of prescribed comfort standards in transition spaces. Further work is now required to confirm the limits and assess energy saving in practice. [Copyright &y& Elsevier]

• Control strategy of the heating of an all-air system in an educational building is optimized. • A nearly zero energy educational building in Belgium is used as case study. • Winter monitoring campaign is analysed and a building energy simulation is calibrated. • Climatic control of the boiler causes a decrease of comfort hours up to 23%. • Climatic control of the storage tank determines energy saving until up to 47%. The optimal control of the HVAC system in the nearly zero energy buildings (nZEBs) can be considered as a challenge. Indeed, the lack of data given by monitored data does not allow understanding what are the implications of different strategies on thermal comfort and energy consumptions. This paper determines an approach for the evaluation of the management of the heating system in an existing educational nZEB. The aim is to understand how the energy efficiency of the heating system is sensitive to controls strategies and the important role played by the control systems. The test lecture rooms on KU Leuven Ghent Technology Campus (Belgium) have been chosen as case study. A deep analysis, starting from an in-field monitoring, was carried out during the winter period of 2019, in order to assess the actual operation and the energy use of building systems under real conditions. Then, a building energy simulation (BES) model of the building and its systems was developed and calibrated against the real monitoring data. Control strategies of the heating system are simulated and compared to the current configuration. The simulation results show that strategies based on a definition of a heating curve for the boiler can reduce the comfortable time (−23%). Controlling the temperature inside the storage tank as a function of the outdoor temperature together with the control on the activation of the air handling unit result in an energy savings from 32% to 46%, with a correspondent increase of comfort time in the period from 0.6% to 3.4% compared to the baseline scenario, depending to the relationship between the external temperature and water temperature inside the water storage tank. [ABSTRACT FROM AUTHOR]