Search

[Display omitted] • A whole system approach to studying a low-temperature HGSHP system. • 3D coupled TH model with realistic boundaries and dynamic heat pump COP. • Design of a HGSHP system to support a 5th generation DHC network. • Different factors on performance of the HGSHP system and ground thermal behaviour. • Ground moisture transfer, cooling process and buried depth are important. Exploitation of shallow ground and its low-grade heat potential is fundamental to designing 5th generation district heating and cooling (DHC) networks. Horizontal ground-source heat pump (HGSHP) systems are a common way to utilize shallow geothermal energy. Realistic estimation and prediction of performance of a HGSHP system and shallow ground thermal behaviour should consider the whole system including building heating and cooling load, heat pump and ground heat exchanger, and the ground. This should be accompanied by realistic atmospheric and ground conditions. In this paper, a three-dimensional coupled thermal–hydraulic model with realistic boundary conditions adopting a whole system approach is presented. Dynamic heat pump coefficient of performance (COP) that depends on seasonal variation of heating/cooling demand and ground conditions are also considered. Model validations are conducted against experimental and analytical results in literatures. The model is applied for evaluating a HGSHP system to support development of a 5th generation DHC network on a potential site in the UK. Several influencing factors, such as ground moisture transfer, building thermal load mode, buried depth of ground loops, and initial ground temperature profile are studied to assess performance efficiency of the HGSHP system and evolution of ground thermal behaviour in response to heat extraction or rejection into the ground. The results show that 5% of the monthly total heat demand of the site could be met by the designed HGSHP system, consisting of 200 U-shaped ground loops buried at the depth of 3 m and pure water as the heat carrier. Overlooking the ground moisture transfer or hyperbolizing the ground saturation would overestimate the load-carrying capacity of the HGSHP system. The HGSHP system is more efficient with a higher heat pump COP under the heating and cooling mode than under the heating-only mode. Predicted performance of the HGSHP system improves with buried depth of the ground loops. The results also show that a 1 ℃ increase in the undisturbed ground temperature could suffice up to 8% of the monthly total heat demand of the site. [ABSTRACT FROM AUTHOR]

• A well-functioning space heating system can operate below 70 °C for 98% of the year and below 55 °C for 71% of the year. • The performance gap between measured and calculated energy use is widening across building age groups, with a clear increase for post-1980 buildings. • Pre-1980 buildings can operate with supply temperatures below 70 °C for 96–99% of the year and below 55 °C for 67–71% of the year. • Building envelope improvement, whilst recommended, is not a pre-requisite for using low-temperature supply in pre-1980 buildings. • Post-1980 buildings could have limitations in respect of using low-temperature heat under windy conditions. Decarbonising heat in the UK by 2050 will require the wider adoption of low-temperature heat. Current systems, largely relying on gas boilers, have design operating temperatures of 82/71 °C (supply/return) while new standards for 4th Generation District Heating are 55/25 °C. Local authorities must set-up strategies to get their buildings "Heat network ready" but this raises the question of the ability for existing buildings to use low-temperature heat. The aim and the novelty of this paper is to establish a relationship between an energy 'performance gap' in Scottish public buildings and their ability to use low-temperature heat. This performance gap has been evaluated for 121 non-domestic buildings, primarily schools, operated by The City of Edinburgh Council. Space heating system are assumed oversized by 10%. The results show that renovation of the building envelope, while highly desirable, is not a pre-requisite for using low-temperature heat in pre-1980 constructed buildings, which represent 64% of the stock. It also highlights that post-1980 buildings, predominantly utilising mechanical ventilation systems, demonstrate an increasing performance gap which could limit their ability to use reduced operating temperature, especially in windy conditions. [ABSTRACT FROM AUTHOR]

This paper investigates factors associated with variation in daily total (electricity and gas) energy consumption in domestic buildings using linked pre-COVID-19 smart meter, weather, building thermal characteristics, and socio-technical survey data covering appliance ownership, demographics, behaviours, and attitudes for two nested sub-samples of 1418 and 682 British households selected from the Smart Energy Research Laboratory (SERL) Observatory panel. Linear mixed effects modelling resulted in adjusted R2 between 63% and 80% depending on sample size and combinations of contextual data used. Increased daily energy consumption was significantly associated (p -value < 0.05, VIF < 5) with: households living in buildings with more rooms and bedrooms, that are older, more detached, have air-conditioning, and experience colder (more heating degree days) or less sunny weather; households with more adult occupants, more children, older adult occupants, higher heating temperature setpoints, and that do not try to save energy. The results demonstrate the value of smart meter data linked with contextual data for improving understanding of energy demand in British housing. Accredited UK researchers are invited to apply to access the data, which has recently been updated to include over 13,000 households from across Great Britain. This paper provides guidance on appropriate methods to use when analysing the data. [ABSTRACT FROM AUTHOR]

This paper provides an analysis of the relationships between dwelling, household, and motivation, behaviour and perception characteristics and winter heating setpoint temperatures (n = 111) and heating periods (n = 148 and 145) used in UK social housing. The work capitalises on primary data from a socio-technical household survey, undertaken in Plymouth, UK, during 2015, which was merged with building audit data collected by the social housing association managing the properties. The mean reported heating setpoint temperature was 20.9 °C and the average weekday and weekend day heating periods were 9.5 h and 11.2 h respectively. The results suggest that heating setpoint temperatures and periods vary greatly among UK social houses, but there are clear systematic variations according to dwelling, household, and motivation, behaviour and perception characteristics. The research could enable social housing providers, the government and commercial organisations to target energy efficiency measures (i.e. thermal upgrades) and social interventions (i.e. behaviour change) at those dwellings and households where their impact may be most beneficial. The results presented could also be used to better inform the assumptions of heating preferences in energy models, which could result in more realistic predictions of the space heating demands of social housing and the potential energy savings from refurbishment measures. [ABSTRACT FROM AUTHOR]

• Over the technologies' typical 20-year lifetime, most UK dwellings have a cost optimum low-carbon heating system using air source heat pumps. • Dwelling properties and spatiotemporal variabilities significantly change the optimum low-carbon technology from blue hydrogen boilers, direct electrical heating, and air source heat pumps, to ground source heat pumps. • Direct electrical heating is economically preferred over heat pumps in lower demand dwellings and with analysis over shorter timescales. • Incentives for low-carbon heating need to target adoption of efficient technologies to reduce the greater increase in network demands. An understanding of heating technologies from the consumers' perspective is critical to ensure low-carbon technologies are adopted for reducing their current associated emissions. Existing studies from the consumers' perspective do not compare and optimise the full range and combinations of potential heating systems. There is also little consideration of how spatiotemporal and dwelling variations combined alter the economic and environmental effectiveness of technologies. The novelty of this paper is the creation and use of a new comprehensive framework to capture the range of heating technologies and their viability for any specific dwelling's traits and climate from customers' perspective which is missing from current studies. The model optimises combinations of prime heaters, energy sources, ancillary solar technologies and sizes, thermal energy storage sizes and tariffs with hourly heating simulation across a year and compares their operation, capital, and lifetime costs alongside emissions to realise the true preferential heating systems for customers, which could be used by various stakeholders. Using the UK as a case study, the results show electrified heating is generally the optimum lifetime cost solution, mainly from air source heat pumps coupled with photovoltaics. However, direct electrical heating becomes more economically viable as dwelling demands reduce from smaller dwellings or warmer climates, as shorter durations of the ownership are considered, or with capital cost constraints from lower income households. Understanding this is of high importance, as without correctly targeted incentives, a larger uptake of direct electrical heating may occur, which will burden the electrical network and generation to a greater extent than more efficient heat pumps. [ABSTRACT FROM AUTHOR]

Abstract: An archetypal simulation model of office building representing variability in UK office building stock by parameterising built form, construction elements, occupancy/usage and operational/control strategy has been developed thus enabling detailed energy performance simulation to be used for stock modelling and parametric studies. The paper discusses the building characteristics needed to be considered for energy performance simulation, their values, and how they can be used in parametric studies. These parameters include built forms, fabrics (including thermal mass and insulation positioning), glazing percentages and characteristics, daylight and solar control measures and activity and operational related parameters (heating and cooling set points, ventilation rate, occupancy density and metabolic rate, equipment and lighting gain). The default parameter values suggested for the archetypal simulation model reflect typical existing and currently proposed UK office building stock. An archetypal model, combined with parametric studies, can be used in assessing energy performance of building stock and evaluating adaptation/retrofitting strategies. [Copyright &y& Elsevier]

Abstract: The Low Carbon Futures project, funded by the Adaptation and Resilience in a Changing Climate (ARCC) Programme, has the objective of using the latest UK climate projections (UKCP’09) to assess overheating in a range of domestic and non-domestic buildings. As these climate projections are probabilistic in nature, and dynamic building simulation is being used by the project to assess building performance, the information produced is vast. To understand how to filter this data into a useable tool that can interact with current building practices, the project has commissioned a range of focus groups to obtain practitioner feedback. These focus groups provide guidance on how buildings are currently designed with respect to overheating but also how future overheating risk assessments, incorporating probabilistic climate projections, might be carried out. This paper describes the assimilation of all this research into a coherent building simulation methodology that could be used by building practitioners to assess future overheating risks of a range of buildings, and provide guidance for applying adaptation solutions to prevent defined comfort thresholds being exceeded. [Copyright &y& Elsevier]

Abstract: This paper examines the efficiency (in terms of energy use and carbon emissions) with which 5 different types of domestic water heating systems employed in the UK are able to produce hot water for sanitary use. A method of normalisation is employed allowing results from case studies with different systems and usage levels to be compared. Water heating appliances studied include gas boilers, a micro CHP, heat pumps, an immersion heater, and a solar thermal system. It is found that instantaneous production of hot water is much more efficient than delivery via tank storage for gas-fuelled systems. For electrical systems, an immersion heater is found to perform better in some circumstances than heat pumps and also has advantages when combined with a solar thermal system leading to the proposal that this combination offers the most potential as a low carbon method for domestic hot water provision in the long term. Opportunities are identified to improve the performance of all systems with storage through better control of heat inputs. Inconsistencies in, and problems of compliance with, established standards for mitigation of Legionella in hot water systems are also identified. [Copyright &y& Elsevier]

Abstract: Green roofs are a passive cooling technique that stop incoming solar radiation from reaching the building structure below. Many studies have been conducted over the past 10 years to consider the potential building energy benefits of green roofs and shown that they can offer benefits in winter heating reduction as well as summer cooling. This paper reviews the current literature and highlights the situations in which the greatest building energy savings can be made. Older buildings with poor existing insulation are deemed to benefit most from a green roof as current building regulations require such high levels of insulation that green roofs are seen to hardly affect annual building energy consumption. As over half of the existing UK building stock was built before any roof insulation was required, it is older buildings that will benefit most from green roofs. The case for retrofitting existing buildings is therefore reviewed and it is found there is strong potential for green roof retrofit in the UK. [ABSTRACT FROM AUTHOR]

Abstract: Possible solutions for zero energy building design in UK are discussed in this paper. Simulation software (EnergyPlus and TRNSYS 16) are employed in this study, where EnergyPlus simulations are applied to enable facade design studies considering building materials, window sizes and orientations and TRNSYS is used for the investigation of the feasibility of zero energy houses with renewable electricity, solar hot water system and energy efficient heating systems under Cardiff weather conditions. Various design methods are compared and optimal design strategies for typical homes and energy systems are provided. [Copyright &y& Elsevier]

Abstract: There are varieties of physical and behavioral factors to determine energy demand load profile. The attainment of the optimum mix of measures and renewable energy system deployment requires a simple method suitable for using at the early design stage. A simple method of formulating load profile (SMLP) for UK domestic buildings has been presented in this paper. Domestic space heating load profile for different types of houses have been produced using thermal dynamic model which has been developed using thermal resistant network method. The daily breakdown energy demand load profile of appliance, domestic hot water and space heating can be predicted using this method. The method can produce daily load profile from individual house to urban community. It is suitable to be used at Renewable energy system strategic design stage. [Copyright &y& Elsevier]