Search

Abstract: One of the primary reasons for the application of cool materials is their energy and associated environmental impact on the built environment. Cool materials are usually applied on the roof of buildings to reduce cooling energy demand. The relative benefits of this reduction depend on the construction of the building, external weather conditions and use of the building. This paper examines the impact from the application of a reflective paint on a flat roof in a naturally ventilated office building in the area of London, UK where the climate is moderate with high heating demand by buildings. The environmental conditions (internal/external air and surface temperatures) of the building were monitored before and after the application of the cool roof during the summer. It was found that internal temperatures were reduced after the application of the cool roof. The building was modelled using TRNSYS and the model was calibrated successfully using the measurements. A parametric analysis was carried out by varying the reflectivity and insulation of the roof and ventilation rate; the heating and cooling demand for a year was calculated using the Summer Design Year for London as the weather file. It was found that cooling demand is significantly reduced, heating demand is increased and the total energy savings vary between 1 and 8.5% relative to an albedo of 0.1 for the same conditions. In free floating (naturally ventilated) buildings summer comfort is improved but there is a penalty of increased heating energy during the winter. Thermal comfort can be improved by an average of 2.5°C (operative temperature difference for a change of 0.5 in albedo) but heating demand could be increased by 10% for a ventilation rate of 2 air changes per hour. The results indicate that in the case of temperate climates the type, operation and thermal characteristics of the building should be considered carefully to determine potential benefits of the application of cool roof technology. For the examined case-study, it was found that a roof reflectivity of 0.6–0.7 is the optimum value to achieve energy savings in a cooled office, improve summer internal thermal conditions in a non-cooled office (albeit with some heating energy penalty). It indicates that it is a suitable strategy for refurbishment of existing offices to improve energy efficiency or internal environmental conditions in the summer and should be considered in the design of new offices together with other passive energy efficient strategies. [Copyright &y& Elsevier]

Abstract: It is well known that it is necessary to insulate the buildings to decrease the thermal demand and to decrease the use of heating and cooling. Due to the high cost of fossil fuels and to the necessity to reduce CO2 emissions, and also due to the new building regulations more attention is paid to the insulation of buildings. Different insulation materials are available in the market. Usually, they are compared by their thermal conductivity and with theoretical calculations, but there are no experimental comparisons available, where the behavior of such insulation materials in a building is compared over time. This is why the authors started a comparison of three typical insulation materials, polyurethane, polystyrene, and mineral wool. For this purpose, four house-like cubicles were constructed (with a size of 2.4m×2.4m×2.4m) and their thermal performance throughout the time was measured. The cubicles were built under a conventional Mediterranean construction system, differing only in the insulation material used. During 2008 and the first months of 2009 the performance of these cubicles was evaluated, and the results are presented in this paper. [Copyright &y& Elsevier]

Abstract: This paper presents a detailed meta-analysis of end and primary energy use for heating, cooling and ventilation of 11 low-energy non-residential buildings and one residential building in Germany that belong to the EnOB research program launched by the German Federal Ministry for Economy. In particular, the analysis emphasizes the substantial impact of auxiliary energy use on the efficiency of heating and cooling performance. The investigated buildings employ environmental energy sources and sinks – such as the ground, ground water, rainwater and the ambient air – in combination with thermo-active building systems. These concepts are promising approaches for slashing the primary energy use of buildings without violating occupant thermal comfort. A limited primary energy use of about 100kWhprim/(m2 neta) as a target for the complete building service technology (HVAC and lighting) was postulated for all buildings presented. With respect to this premise, a comprehensive long-term monitoring in high time resolution was carried out over the course of two to five years, with an accompanying commissioning of the building performance. Measurements include the energy use for heating, cooling, and ventilation, as well as the auxiliary equipment, the performance of the environmental heat source and sink, and local climatic site conditions. [Copyright &y& Elsevier]

Abstract: The large thermal time constant of thermally activated building systems (TABS) hampers communication between the system''s production and emission. Therefore, conventional building control strategies, typically using room temperature feedback, are unadapted to control thermal comfort efficiently. In this paper, measurement data and simulation results reveal that unadapted TABS control has a dramatic impact on overall energy performance. Measurements in a TABS building with room temperature feedback show the HVAC system switching between heating and cooling in a very short time frame. A simplified, generic room model is used to simulate, understand and evaluate this behaviour. For room temperature feedback control, only 45% of the cold and 15% of the heat produced actually controls room temperature. The remainder is stored in the TABS and exchanged between the heating and cooling system. Enlarging the heating-to-cooling set point band improves this ratio, while maintaining thermal comfort. On the other hand, night time operation control of the circulation pump, adapted to the TABS thermal time constant, eliminates this ‘unused’ energy completely. In this case, however, even with perfect heat gain forecasts, it is difficult to avoid room temperatures dropping below thermal comfort limits during initial office hours. Hence, a supplementary air-conditioning system seems inevitable. [Copyright &y& Elsevier]