Search

Abstract: The aim of this paper is to contribute to the knowledge about energy use in residential buildings. Field measurements were carried out in 57 electrically heated Swedish single-family houses, where the total energy use (i.e. electricity use for space heating, household electricity and electricity use for hot water production), indoor temperatures and water use were recorded during four winter days. Some of the findings were that differences for households’ total energy use of similar houses were large. The characteristics of load curves clearly differ between weekdays and weekend days. The water use differs greatly for the households. This paper is part of a larger project where time use diaries were used in order to further link the energy use to residents’ every day energy related behaviours. To get a better understanding of the energy use in our homes is a prerequisite to be able to both recognise the problems as well as the potentials of reaching energy goals of our society, leading to a decreased impact on the environment from the building sector. [Copyright &y& Elsevier]

Abstract: District heating is used in many urban areas in Sweden. Almost always, the district heating utility is owned by the municipality and the municipality naturally encourages proprietors to connect their buildings to the grid, even if they cannot really force them to do so. The building owners are free to choose the best system, i.e. the cheapest one, for their need. Unfortunately, it is not always so easy to find the best solution. Mixed integer linear programming (MLIP) models might here come to help. By such computer programs it is possible to find the absolutely cheapest system of available alternatives, or even combinations among them. This paper shows how to design such a model and further how to closely depict the district heating, and electricity tariff. This is of course very important because the only interface between the proprietor of the building and the utility is found in this bureaucratic instrument. If the tariff is too high the building owners will choose other heating systems than district heating, or even worse, combining district heating with alternative base load sources. In Sweden, this has been of interest because ground-water coupled heat pumps can be profitable, operated by use of the relatively low electricity prices. In this paper we show that dual-fuel, and sometimes even triple-fuel systems, are of interest when the proprietor aims at minimising the cost for space and domestic hot-water heating. [Copyright &y& Elsevier]

Abstract: Energy use in the built environment represents a large part of total energy use in Sweden and is one important sector where energy conservation needs to be significantly improved in order to meet the national implementation of the European goals. One key question that needs to be investigated in relation to these goals is the performance and implementation of passive or low-energy houses. This paper presents results and an evaluation of a newly built house in an area with passive houses in Linköping, Sweden. Nine passive houses were built with the aim to be energy efficient, with an annual space heating demand of 21kWh/m2, and at the same time to have the same visual appearance as any other building in the surrounding area. This study evaluates the energy performance of a residential area with low-energy buildings based on Building Energy Simulation (BES) (IDA ICE 4), and measurements from the real object. Both annual and hourly validation is performed using room by room modeling and internal heat gains. A novel approach to internal heat gain modeling is presented using time-use data (TUD). The results show possible improvements in the design, the building envelope and in the heating control. [Copyright &y& Elsevier]

• Investigation of two residential buildings in a sub-Arctic region. • One building subject of energy-retrofit, one maintained the original envelope. • No significant improvement to the heat supply after energy efficiency measure. • The thermal indoor climate showed signs of overheating. • The heating system should be reviewed when an energy-retrofit is done. There is a need to improve the understanding and the knowledge of energy efficiency measures for residential buildings in sub-Arctic climate regions. This paper presents an investigation of two identical multi-family residential buildings in the sub-Arctic climate of northern Sweden, before and after renovation. During the renovation, additional insulation of the external walls and new windows were installed in one building, while the other building retained its original envelope. The energy usage data for the past four heating seasons were collected, including data from before and after the renovation. Detailed thermal indoor climate data were gathered for specific months. The data from the two separate buildings showed that the renovation did not result in a significant improvement in energy usage. Prior to the renovation, the energy usage data showed a difference of 2–3% in the heat supply between the two buildings, and this difference persisted after the renovation. On the other hand, the indoor air temperature was raised. The renovated building had an indoor air temperature which was 2 °C higher than the not yet renovated building. IDA ICE models were constructed and validated with the measured data to investigate how a lower indoor air temperature would affect the energy usage and indoor thermal climate. The models showed that with a reduction in the indoor air temperature by 2 °C after the renovation, the thermal climate would maintain an acceptable level according to PMV/PPD standards, and would result in a 13–14% reduction of the heat supply during the cold months. With an annual reduction of 15%, the heat supply could be reduced by 270 MWh per year for the whole area where the buildings are located. This clearly demonstrates the importance of adjusting the heating system after an energy efficiency measure has been performed. [ABSTRACT FROM AUTHOR]