Search

Abstract: In this paper, technical procedure for developing energy performance label for office buildings in Iran is presented. According to inappropriate energy consumption indexes of the office buildings in Iran, present research was conducted for this group of buildings. For this purpose, a building energy simulator software tool was developed, validated, and applied to simulate an exhaustive sample society of office buildings. A widespread field activity was conducted to gather the modeling data from 285 office buildings through all the 4 climatic zones in Iran. Moreover, Reference Buildings as the energy efficient buildings were defined and modeled in the software environment. Energy consumption indexes from modeling of sample society and Reference Buildings were applied to conclude the boundaries for grades A–G of the label. Finally, the label appearance was designed and authorized to be applied for both the existent and new buildings. The upper limit for grade A is determined as: 84, 75, 78, and 82 (kWh/Y/m2) and the upper limit of grade G (the failing point) is concluded as: 588, 525, 546, and 574 (kWh/Y/m2) for cold, mild, hot and dry, and hot and wet climatic zones, respectively. [Copyright &y& Elsevier]

Abstract: There is an increasing trend in using heat pumps in air conditioning (heating/cooling) systems of residential and commercial buildings. The required power to drive the compressor of vapor compression heat pump cycles may be provided by either an electrical motor or an internal combustion engine. In this paper thermal modeling and economic analysis of gas engine heat pumps (GEHPs) are presented based on energy and mass balance equations as well as the gas engine operating parameters (such as thermal efficiency, fuel consumption and fuel mass flow rate) and heat pump operating parameters (such as evaporator and condenser capacity and compressor input power). Based on the modeling results and with estimating GEHP fuel consumption, the economic analysis of using gas engine heat pumps (in comparison with the electrical heat pumps) at various climate regions of Iran, for both residential and commercial (office) buildings, and for both cooling and heating modes, was performed. Appropriate cost functions for predicting GEHP capital investment were proposed. Three approaches including equivalent uniform annual cost (EUAC), the annual cost of energy consumption, and payback period were applied in the economic analysis. [Copyright &y& Elsevier]