Search

Abstract: Reducing the energy consumption of air-conditioning systems is becoming increasingly important. This paper focuses on the air-conditioning system in Terminal 3 in Xi’an Xianyang International Airport, the first airport terminal to adopt radiant cooling in China. In the large spaces of this airport terminal, a temperature and humidity independent control (THIC) system has been adopted instead of a conventional nozzle air supply method, which significantly reduces the energy consumption of the air supply. The radiant floor is the main mechanism for indoor temperature control, while a liquid desiccant outdoor air processor combined with displacement ventilation is responsible for humidity control. Ice storage is adopted to reduce operating costs, and the supplied chilled water temperature can be as low as 3°C. This paper examines the performance of the THIC system in detail. The indoor environment is determined through measurements to be comfortable, and the on-site performances of key components in both the airport terminal and the cooling plant are investigated. The outdoor air processor supplies air of appropriate temperature and humidity ratio; two kinds of radiant floors are used for temperature control, both with measured cooling capacities of about 30–40W/m2; and the energy efficiency ratio (EER) of the cooling plant is 2.62. [Copyright &y& Elsevier]

China has been the world's largest producer and consumer of air conditioners, and more and more RACs 1 1 The RACs is short for room air conditioners. would be owned by China's households along with the rapid economic development. Air Conditioner is also considered as one of the largest potential contributors to energy reduction among home appliances because of the huge energy consumption. Therefore, the national energy efficiency standards were issued to promote the use and production of high-efficient RACs. According to China's energy efficiency standards, this paper investigated the electricity savings and CO 2 emission reductions from RACs over the period of 2005–2025. The results indicate that the rural RAC market which develops more slowly than the urban one still has great potential, and government has to revise subsidy policies to make the standards more effective, especially for rural areas. In 2025, the total electricity consumption of RACs is projected to be 598–674 TW h, while the amount without energy efficiency standards is 753 TW h. From 2005 to 2025, the energy efficiency standards for RACs can save 1430–2540 TW h electricity and reduce 908.3–1610. 1 Mt CO 2 emissions in different scenarios. Finally, we suggest that the standards should be revised every 4 or 5 years with higher revision pace of 8% to 10% [ABSTRACT FROM AUTHOR]

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]

Abstract: Hainan province is the only tropical and island province in China, with the unique climatic and geographical features. It has a different energy performance in public buildings from those in the inland areas. This paper investigated the current situation of energy consumption of the sampled public buildings, including 26 hotels, 24 office buildings and 7 department stores, through analyzing utility billing data, on-site survey and measurement, and site operational records. The breakdowns of energy consumption found out that the electricity dominated the energy consumption for all the sampled buildings and the air conditioning system played a key role in the energy consumption of major building services. By analyzing the main factors for building energy consumption, the annual average energy use indexes were calculated to be 141.63kWh/m2, 87.70kWh/m2, and 166.95kWh/m2 for hotels, office buildings and department stores, respectively. Besides, the comparison between Hainan province and other areas revealed that the building energy consumption of this tropical province was at a low level. Because indoor environment quality can influence the health and work efficiency of humans in buildings, field tests on the indoor environment quality were also carried out, and the performance of indoor environment quality was rated. [Copyright &y& Elsevier]

Abstract: There are presently different types of air conditioning products in China such as room air conditioners, variable speed room air conditioners, unity air conditioners, multi-connected air-condition (heat pump) unit, chilled water air conditioning systems. For these air conditioning products, evaluation indexes have been created, respectively including energy efficiency ratio (EER), coefficient of performance (COP), seasonal energy efficiency ratio (SEER) and integrated part load value (IPLV), and their energy efficiency standards have been established. Based on thermodynamic perfectibility, this paper makes the compatible analysis of the energy efficiency and thermodynamic perfectibility gradient of energy efficiency standards for different air conditioning products. According to testing conditions of evaluation indexes, these air conditioning products are classified into two groups, the standard rating conditions group (EER, COP) and the variable working condition group (SEER, IPLV). The results show the thermodynamic perfectibility of different air conditioning products grade as the same level for energy efficiency standards in each group differ from one another. Besides, the average thermodynamic perfectibility gradient of energy efficiency levels for air conditioning product in the standard rating conditions group is basically the same, and that of variable speed room air conditioners and multi-connected air-condition (heat pump) unit are the highest and lowest, respectively. [Copyright &y& Elsevier]