Search

Abstract: District heating is used in many urban areas in Sweden. Almost always, the district heating utility is owned by the municipality and the municipality naturally encourages proprietors to connect their buildings to the grid, even if they cannot really force them to do so. The building owners are free to choose the best system, i.e. the cheapest one, for their need. Unfortunately, it is not always so easy to find the best solution. Mixed integer linear programming (MLIP) models might here come to help. By such computer programs it is possible to find the absolutely cheapest system of available alternatives, or even combinations among them. This paper shows how to design such a model and further how to closely depict the district heating, and electricity tariff. This is of course very important because the only interface between the proprietor of the building and the utility is found in this bureaucratic instrument. If the tariff is too high the building owners will choose other heating systems than district heating, or even worse, combining district heating with alternative base load sources. In Sweden, this has been of interest because ground-water coupled heat pumps can be profitable, operated by use of the relatively low electricity prices. In this paper we show that dual-fuel, and sometimes even triple-fuel systems, are of interest when the proprietor aims at minimising the cost for space and domestic hot-water heating. [Copyright &y& Elsevier]

Abstract: Energy use in the built environment represents a large part of total energy use in Sweden and is one important sector where energy conservation needs to be significantly improved in order to meet the national implementation of the European goals. One key question that needs to be investigated in relation to these goals is the performance and implementation of passive or low-energy houses. This paper presents results and an evaluation of a newly built house in an area with passive houses in Linköping, Sweden. Nine passive houses were built with the aim to be energy efficient, with an annual space heating demand of 21kWh/m2, and at the same time to have the same visual appearance as any other building in the surrounding area. This study evaluates the energy performance of a residential area with low-energy buildings based on Building Energy Simulation (BES) (IDA ICE 4), and measurements from the real object. Both annual and hourly validation is performed using room by room modeling and internal heat gains. A novel approach to internal heat gain modeling is presented using time-use data (TUD). The results show possible improvements in the design, the building envelope and in the heating control. [Copyright &y& Elsevier]