Search

Global warming has drawn great attention in recent years because of its large impact on many aspects of the environment and human activities in buildings. One area directly affected by climate change is the energy consumption for heating and cooling. To quantify the impact, this study used the HadCM3 Global Circulation Model (GCM) to generate weather data for future typical meteorological years, such as 2020, 2050, and 2080, for 15 cities in the U.S. based on three CO 2 emission scenarios. The method was validated by comparing the projected TMY3 data using HadCM3 with the actual TMY3 data. By morphing method, the weather data was downscaled to hourly data for use in building energy simulations by EnergyPlus. Two types of residential buildings and seven types of commercial buildings were simulated for each of the 15 cities. This paper is the first to systematically study the climate change impact on various types of residential and commercial buildings in all seven climate zones in the U.S. through EnergyPlus simulations and provide weighted averaged results for national-wide building stock. We also identified geographical dependency of the impact of climate change on future energy uses. There would be a net increase in source energy consumption by the 2080s for climate zones 1–4 and net decrease in climate zones 6–7 based on the HadCM3 weather projection. Furthermore, this paper investigated natural ventilation performance in San Francisco, San Diego, and Seattle with improved natural ventilation model. We found that by the 2080s passive cooling would not be suitable for San Diego because of global warming, but it would still be acceptable for San Francisco and Seattle. [ABSTRACT FROM AUTHOR]

Abstract: Thermal mass combined with other passive strategies can play an important role in buildings energy efficiency, minimizing the need of space-conditioning mechanical systems. However, the use of lightweight materials with low thermal mass is becoming increasingly common. Phase Change Materials (PCMs) can add thermal energy storage benefits to lightweight constructions. There are many studies about the use of PCM in buildings, but there are still some difficulties for effective use and practical application of these materials. The study of applications used in real buildings could help us find solutions to these difficulties. This paper analyzed different PCM applications presented in highly efficient lightweight construction houses that have participated in the American Solar Decathlon, an international competition organized by U.S. Department of Energy. These houses have been tested and monitored in Washington DC, place with suitable climate conditions for short term thermal storage systems. The study started with a classification of the PCM applications and included an analysis of the systems, materials, switching temperatures, containments and design strategies used to improve the houses energy performance. Also, it included results of numerical simulations and experimentation that the participant team had done, complemented with information available in the literature about similar materials or applications. [Copyright &y& Elsevier]

• A comprehensive analysis of data from commercial buildings in United States to identify operational problems and opportunities. • These opportunities were not strongly correlated with building vintage, size, or building type, but were reflective of how the buildings are operated. • This analysis showed that opportunities to improve building operations exist in almost every building. • There was wide variation in whole building energy savings, ranging from 0 to 50% and 0 to 18 $/m2 with median percent annual whole building savings of 12% and median normalized annual cost savings of $1.75/m2. In the United States, as much as 30% of the 19 EJ that commercial buildings consume is considered excess. Much of the excess energy is due to the inability to manage building operations efficiently. Because almost 20% of the total primary energy consumption is associated with commercial buildings, significant energy reductions in this sector are needed to mitigate climate change. Therefore, many cities and states are mandating periodic "tune-ups" of these buildings to eliminate excess energy consumption. Although the benefits of tune-ups and retro -commissioning are clear, focusing these mandates to look for specific opportunities has been a challenge because of the lack of studies that document the prevalence of opportunities. Therefore, we analyzed building automation system data from 151 buildings across the United States to document common operational problems and opportunities to improve building operations. This analysis showed that opportunities to improve building operations exist in almost every building. These opportunities were not strongly correlated with building vintage or size, but were reflective of how the buildings are operated. The prevalence of the top 20 opportunities ranged between 74% and 23%, with 40% of these associated with air-handling units. The rest of the opportunities are associated with schedules, chilled and hot-water distribution, and zone controls. Of the 151 buildings, 69 of them implemented corrective actions of some or all opportunities that were identified. Implementation varied across the Re-tuning categories, with 60% for schedule opportunities, 50% for zone opportunities, over 40% for the air-handling unit and hot-water opportunities, and 35% of the chilled-water opportunities. There was wide variation in whole building energy savings, ranging from 0 to 50% and 0 to 18 $/m2 with median percent annual whole building savings of 12% and median normalized annual cost savings of $1.75/m2. In addition to documenting these key findings, the paper provides a list of opportunities that can be automatically and continuously identified and corrected and offers a list of those opportunities that should be the focus of the mandates. [ABSTRACT FROM AUTHOR]