Search

• POE was carried out to compare the design target and operational effect after use. • A Large Irregular Green Commercial Building was chosen for in-depth analysis. • We recommend the building energy saving and carbon emission reduction strategy. Commercial buildings, especially large irregular commercial buildings with complex space and dense occupation, have high energy consumption and carbon emissions. Moreover, the actual operating performance differs significantly from its design, in terms of energy conservation and carbon emissions. This study selected an irregular large-scale green commercial building in Dalian, a coastal city in the cold zone of China. The running energy consumption and indoor physical environment were investigated and analyzed, and a satisfaction survey was conducted using the Post-occupancy evaluation (POE) methods. The promotion strategies of holistic design were proposed by comparing the operational building performance with the design target. The research shows that the energy consumption of the building was 68.02 kWh/m2, which failed to meet the standard requirements. The carbon emission was 74.76 kgCO 2 /m2. Less than 10 % of humidity in summer fell in the expected range, and the lowest value of PM 2.5 concentration in winter was 28.3 %. The score of indoor environmental quality and service satisfaction was low. This paper identifies the problems and analyzes the differences between the operation stage and design phase. It provides recommendations and guidelines for optimizing the carbon emission and indoor environment based on the performance improvement of building operational conditions. [ABSTRACT FROM AUTHOR]

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]