Search

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]

Abstract: The concern on climate change leads to growing demand for minimization of energy use. As building is one of the largest energy consuming sectors, it is essential to study the impact of climate change on building energy performance. In this regard, building energy simulation software is a useful tool. A set of appropriate typical weather files is one of the key factors towards successful building energy simulation. This paper reports the work of developing a set of weather data files for subtropical Hong Kong, taking into the effect of future climate change. Projected monthly mean climate changes from a selected General Circulation Model for three future periods under two emission scenarios were integrated into an existing typical meteorological year weather file by a morphing method. Through this work, six sets of future weather files for subtropical Hong Kong were produced. A typical office building and a residential flat were modeled using building simulation program EnergyPlus. Hourly building energy simulations were carried out. The simulated results indicate that there will be substantial increase in A/C energy consumption under the impact of future climate change, ranging from 2.6% to 14.3% and from 3.7% to 24% for office building and residential flat, respectively. [Copyright &y& Elsevier]

Abstract: It becomes popular to use computer simulation technique to evaluate the performance of energy utilizations in buildings. The hourly weather data as simulation input is a crucial factor for the successful energy system simulation, and obtaining an accurate set of weather data is necessary to represent the long-term typical weather conditions throughout a year. This paper introduces a stochastic approach, which is called the first order multivariate Markov chain model, to generate the annual weather data for better evaluating and sizing different energy systems. The process for generating the weather data time series from the multivariate Markov transition probability matrices is described using 15-years actual hourly weather data of Hong Kong. The ability of this new model for retaining the statistical properties of the generated weather data series is examined and compared with the current existing TMY and TRY data. The main statistical properties used for this purpose are mean value, standard deviation, maximum value, minimum value, frequency distribution probability and persistency probability of the weather data sequence. The comparison between the observed weather data and the synthetically generated ones shows that the statistical characteristics of the developed set of weather data are satisfactorily preserved and the developed set of weather data can predict and evaluate different energy systems more accurately. [Copyright &y& Elsevier]

Abstract: The shading-type building-integrated photovoltaic (BIPV) claddings can act as power generators as well as external shading devices of a building, which reduce the energy consumption of the building. However, there is little information about energy impacts of different tilt angles of the shading-type BIPV claddings. By considering the typical meteorological conditions of Hong Kong, the energy performance of the shading-type BIPV claddings, in terms of the electricity generation and the cooling load reduction, is analyzed in this paper. The optimum tilt angle of PV modules for maximum electricity generation is found to be 20° instead of local latitude. Combining electricity generation and cooling load reduction, it can be concluded that the optimum tilt angles for the first type of the shading-type BIPV claddings vary from 30° to 50°, while the optimum tilt angle for the second type is 0°. [Copyright &y& Elsevier]

Abstract: A benchmark study of the energy efficiency of private office buildings in Hong Kong was conducted in 2002 because energy efficiency was declining. In the study, private office buildings were divided into five user groups. For each group, a multiple regression model was developed to find the relationship between Energy Use Intensities (EUIs) and other factors, such as operating hours, for normalization and benchmarking purposes. In this paper we make use of the regression results to study the energy efficiency of private office buildings by different grades. In Hong Kong, office buildings are divided into three grades (A, B, and C) based on the quality of the facility, which is reflected in rental values; a Grade A office building denotes expensive luxury. We found that the EUI of Grade A office buildings is the highest, consuming over 50% of the total energy used in office buildings. Recently, the annual EUI of office buildings has improved even though Grade A floor space is increasing. This may be due to the promotion of the energy efficiency program launched in the last decade. [Copyright &y& Elsevier]

Abstract: Mandatory energy codes to curb energy use of residential buildings have been formally launched in China for more than two decades but little has been publicized in literature. Similar codes are not available for residential buildings in Hong Kong, but most residential buildings in Hong Kong, especially public housing estates, are HK-BEAM certified to demonstrate their compliance with regulatory and basic design requirements. Given HK-BEAM is internationally recognized and there are doubts about the effectiveness of the China codes, how the energy efficiency of the HK-BEAM certified buildings compare with buildings in compliance with the China codes is of interest to most building designers and policy makers. This paper describes how the energy efficiency of a case study building in compliance with the China codes compare with the one in compliance with HK-BEAM. The energy simulation by HTB2 and BECRES reveal that the case study building in compliance with the China codes is 51.1% better in energy use. In the study, the relative impact of each compliance criterion on energy use and cooling load has been quantified by sensitivity analysis. The sensitivity values indicate that energy use is most sensitive to air-conditioning operation hours, indoor design temperature, coefficient of performance (COP) of the room air-conditioners (RAC) units, and the envelop characteristics. The results of this study indicate that a HK-BEAM certified building cannot satisfy the China codes requirements. This provides good reference to the policy makers, the building owners, and to the China and Hong Kong Governments when considering reciprocal recognition of building energy codes. [Copyright &y& Elsevier]