Search

Highlights • The paper studies the impact of urban parks on reducing urban temperature. • Findings reveal that urban park construction reduces building energy consumption. • There is a limit distance to the reduction of energy consumption due to urban parks. • Change of urban characteristics due to park construction affects energy consumption. Abstract A change in the thermal environment of an urban area affects health, living conditions, and energy consumption. In urban planning, urban parks are one of the methods for improving the thermal environment and saving cooling energy. Urban park construction can mitigate temperature, but it also causes urban development by increasing local attractiveness. To achieve efficient energy saving through parks in urban planning, the purpose of this study is to investigate the relationship between building energy consumption and urban characteristics both before and after the construction of an urban park. This study targeted Seoul's Gyeongui line forest, which was recently converted into a linear park on the former railway as an urban regeneration project. We analyzed the relationship between energy consumption and urban characteristics using a regression model, focusing on the changes before and after the construction. In this study, urban characteristics include environment, building physical characteristics, and economic variables. The results show that the construction of the urban park reduced not only temperature but also building energy consumption. The energy reduction effect of the park was limited to a marginal distance. Meanwhile, the urban park construction caused land prices to rise and prompted new development, and this changed the urban characteristics of the area and affected energy consumption. Despite changes in urban characteristics, urban park planning is an effective methods of reducing the energy consumption involved in cooling urban areas. We recommend comprehensive consideration of the urban factors when making park policy to reduce urban temperature and energy consumption. [ABSTRACT FROM AUTHOR]

• This paper determines the relationship between urban form and building energy use. • The surface-to-volume ratio and obstruction angle of buildings are important. • Consideration of the heating energy type and building use can yield reliable result. • The urban heat island effect exerts an impact on the electricity use in some months. • Correlation variation is caused by the building permit date. In the climate change era, urban geometry serves to ensure sustainability for urban planners since it notably affects building energy consumption. However, previous studies have mainly conducted experimental investigations under hypothetical conditions. Without empirical evidence, it is difficult to implement these findings under real conditions. This paper examined empirical data to determine the urban geometry effect on building energy consumption in a large, complicated urban area. Urban geometric parameters, including the surface-to-volume ratio, obstruction angle, and building orientation, were measured across Seoul, and their correlations with building energy use were analyzed. The results show that the surface-to-volume ratio and obstruction angle are important, despite the empirical data complexity. Additional data analysis indicates that the heating energy type and building use consideration yields more reliable correlation coefficient trends. The potential impacts of natural ventilation and the urban heat island (UHI) effect on building energy consumption were examined. The UHI effect, rather than shadows on buildings, predominantly impacts the building electricity use in August and September. The correlation variation caused by the building permit date was investigated. The results in this paper could help urban planners and designers develop blueprints to control urban geometry and establish relevant design guidelines. [ABSTRACT FROM AUTHOR]

The South Korean government is presently conducting a research project to provide measurement-based building energy consumption data for individual end uses, such as space heating, space cooling, domestic hot water (DHW), and other uses. From 2014 to 2019, energy consumption measurement systems for each end use were installed in sample buildings, and the measured data are being statistically processed with the objective of constructing an information system for energy use and CO 2 emission intensities by end use. This paper presents the statistical data for the site and primary energy use intensities (EUIs) and the CO 2 emission intensities by end use for the period of May 2017–April 2018; the data were obtained from measurements in 71 sample apartment units located in Seoul. The average site EUIs display the following order: space heating > electrical appliances > DHW > cooking > lighting > space cooling > air movement. Electrical appliances have the largest average primary EUI and CO 2 emission intensity. The average site EUIs exhibit the same order as those of the US Residential Energy Consumption Survey 2015 data: space heating > electrical appliances, etc. > DHW > space cooling. [ABSTRACT FROM AUTHOR]