Search

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]

Abstract: Urban heat island can significantly increase the demand for cooling of buildings in cities. This paper investigates one of the main causes of the urban heat island phenomenon, i.e. reduced city ventilation. Two simple Hong Kong city models with relatively complex terrain were considered here under different atmospheric conditions. A 3D RNG k–ɛ turbulence model was used for modeling turbulence effects. The simulation results showed that the influence of thermal stratification can be significant on city ventilation driven partially by thermal buoyancy. When the wind speed is relatively large, the impact of thermal stratification on air flow in city street canyons is minor. When the wind speed is small relative to the buoyancy force, the airflow in the street canyons is dependent on thermal stratification. When there is an adverse vertical temperature gradient, the greater the instability, the stronger the vertical mixing and the greater the flow rate caused by turbulence. The heat and pollutants can easily accumulate under stable atmospheric conditions when there is only a weak background wind or none at all. [Copyright &y& Elsevier]

Abstract: Double skin façade can be defined as a building façade covering one or several stories with multiple skins. The skins may be air tight or ventilated. With sophisticated study and design, buildings constructed with double skin façade can have better thermal performance than the conventional single skin façade. This paper reports the findings on the energy performance of double skin façade applied to a typical office building under the climatic condition in Hong Kong. An experimental setup was established and the measured data were used to verify the theoretical model developed via the EnergyPlus simulation program. The validated model was then used to evaluate the energy performance of double skin façade with various configurations including glazing type (clear, absorptive or reflective glass), glazing position (inner or outer pane) and glazing layers (single or double glazing material). The results indicate that a double skin façade system with single clear glazing as the inner pane and double reflective glazing as the outer pane can provide an annual saving of around 26% in building cooling energy, as compared to a conventional single skin façade with single absorptive glazing. However, the long payback period of 81 years makes the double skin façade system economically infeasible. Support and motivation are needed from the local government in order to foster successful and widespread application of the double skin façade system in buildings. [Copyright &y& Elsevier]