Search

Abstract: Thermal performance of earth air tunnel heat exchanger (EATHE) under transient operating conditions has been evaluated for predominantly hot and dry climate of Ajmer (India) using experimental and computational fluid dynamics modeling. Effect of time duration of continuous operation and thermal conductivity of soil on thermal performance of EATHE under transient conditions has been analyzed. Results show that the transient thermal performance of EATHE is significantly dependent on thermal conductivity of the soil and duration of its continuous operation. Under steady state condition, a drop of 18.8°C is obtained in air passing through EATHE having 0.1m diameter and 60m length, at 5ms−1 flow velocity, whereas, the transient analysis shows that for soil having thermal conductivity of 0.52Wm−1 K−1, the cooling of air reduces from 18.7°C to 16.6°C, after 24h of continuous operation. Change in cooling effect after 24h of operation for soil thermal conductivity of 2.0Wm−1 K−1 and 4.0Wm−1 K−1, reduced from 18.8°C to 18.5°C and 18.8°C to 18.7°C respectively. The analyzed cases have shown the range of derating to be as minimal as 0% to as high as 64%, which if ignored while designing may lead to poor performance of earth air heat exchangers. [Copyright &y& Elsevier]

Abstract: Thermal performance of Earth Air Tunnel Heat Exchanger (EATHE) under transient operating conditions in winter season has been evaluated for predominantly hot and dry climate of Ajmer (India) using experimental and Computational Fluid Dynamics (CFD) modeling. Effect of time duration of continuous operation and thermal conductivity of soil on thermal performance of EATHE under transient conditions has been analyzed. Results show that the transient thermal performance of EATHE is significantly dependent on thermal conductivity of the soil and duration of its continuous operation. Under steady state condition, a rise of 19.6°C is obtained in air passing through EATHE having 0.1m diameter and 60m length, at 5m/s flow velocity, whereas, the transient analysis shows that for soil having thermal conductivity of 0.52Wm−1 K−1, the heating of air reduces from 19.4°C to 17.2°C, after 24h of continuous operation. Heating effect after 24h of operation for soil thermal conductivity of 2.0Wm−1 K−1 and 4.0Wm−1 K−1, reduced from 19.6°C to 19.2°C and 19.6°C to 19.5°C, respectively. The analyzed cases have shown the range of derating to be as minimal as 0% to as high as 64%, which if ignored while designing may lead to poor performance of earth air heat exchangers. [Copyright &y& Elsevier]

Abstract: Earth–air–tunnel heat exchanger (EATHE) systems are insufficient to meet the thermal comfort requirements in summer conditions. Therefore, evaporating cooling has been integrated with EATHE to enhance the thermal comfort hours. Economics of integrated EATHE–evaporative cooling system to reduce/avoid the use of air-conditioner and electric heater is analyzed by evaluating simple Internal Rate of Return (IRR) on investment. For this analysis a transient and implicit model based on computational fluid dynamics has been used for evaluating the energy saving obtained by the use of EATHE system integrated with evaporative cooling. Four base cases of existing systems, i.e. air-conditioner and electric heater have been considered for carrying out the economic analysis. Moreover, three different types of blower (i.e. energy efficient blower, standard blower and inefficient blower) have been considered for evaluating the energy saving and financial viability of the proposed system. These results of IRR calculation shows that wherever, the existing air conditioner and heaters are efficient, their replacement with proposed EATHE system is not a technically and economically viable option. It is observed that the IRR value is greatly dependent on the electric tariff and the energy efficiency of the blower used in the proposed EATHE system. [Copyright &y& Elsevier]

Abstract: Increasing the coefficient of performance of air-conditioner with air-cooled condenser is a challenging task especially in areas where weather conditions are quite hot. The performance of conventional vapour compression system based air-conditioners can substantially be improved by coupling these active cooling systems with less energy intense passive cooling systems. In the present research, an attempt has been made to enhance the performance of active cooling system by coupling it with EATHE in four different hybrid modes and thermal performance of the developed hybrid cooling system has been investigated experimentally. The power consumption of conventional 1.5 TR window type air conditioner is found to be reduced by 18.1% when cold air from EATHE is completely used for condenser cooling of the air-conditioner. [Copyright &y& Elsevier]

• Development of a laboratory scale experimental set up with slinky-coil pipe layout. • Use of sand–bentonite mixture as backfilling material for GAHE system. • Required length of the trench is reduced by using slinky-coil pipe layout. • Substantial saving in terms of excavation cost and piping cost. The ground-air heat exchanger (GAHE) is the promising passive technique for building heating/cooling, but due to its high installation cost (mainly pipe cost and excavation cost), it could not become popular. The required length of pipe can be reduced by using thermally enhanced backfilling material (BFM), while, the length of the trench can be reduced by using slinky-coil pipe layout. In the present study, an experimental laboratory setup of GAHE system has been developed with a slinky-coil pipe layout and sand-bentonite as BFM. For this, a flexible PVC pipe of 75 mm diameter and 30 m length, has been arranged in slinky-coil pattern and installed horizontally in a soil box of 10.2 m length. For the study, variation in soil temperature (23 °C–27 °C), inlet air temperature (38 °C–46 °C), air flow velocity (5 m/s–20 m/s) and soil conditions (dry and wet), have been considered. Study reveals that a drop-in air temperature as high as 18.7 °C at 30 m pipe length (trench length of 10.2 m) can be achieved with soil at a temperature of 27 °C and inlet air temperature of 46 °C. The study also revealed that the pipe length could be reduced by 20% with wet sand-bentonite as compared to dry sand-bentonite. [ABSTRACT FROM AUTHOR]