Search

In this paper, a novel ethylene-vinyl acetate copolymer (EVA)/amino-functionalized polymethylsilsesquioxane (PAMSQ) composite wax inhibitor (WI) was prepared through melt blending, and the rheological and wax depositing properties of the doped crude oil were studied. The EVA/PAMSQ composite can strongly crystallize with wax molecules and trigger the formation of compact wax flocs, which greatly improve the rheological properties of crude: compared to the pure EVA at the same dosage, the composite can further decrease the gel point and apparent viscosity (25 °C) by 14.6 °C and 92.0%, respectively. The wax deposition can also be inhibited by adding the composite: adding EVA inhibits the mass of the wax deposit at 24 h by 62.3%, and this number is suppressed by 77.9% after adding the EVA/PAMSQ composite, but the wax molecule diffusion is accelerated and the wax content in the wax deposit rises because of the improved crude oil rheological characteristics. Here, we develop the gel structure theory to consider the wax deposition process affected by the WI. Adding the WI contributes little to the wax precipitation temperature but decreases the gel structural strength of the oil a lot, and thus, the oil near the pipe wall can only form the wax deposit with a higher wax content to resist the pipe wall shearing. Therefore, the crude oil added EVA/PAMSQ composite possesses not only the lowest wax deposit rate and the highest aging rate but also the highest wax content in the wax deposit.

An experimental rheometric investigation is performed to assess the utility of various gelation point determination methodologies. Controlled shear stress and controlled shear rate methods are developed to investigate gelation processes in waxy oils. The nonoscillatory rheological method exhibits high reproducibility for model wax oils as well as for real crude oils. In addition, the nonoscillatory methods are in good agreement with standard oscillatory gel point determination methods. The effect of imposed shear stress, imposed shear rate, and cooling rate on gelation point is investigated with two types of model oils: 5 wt % macrocrystalline wax in Primol 352 and 5 wt % macrocrystalline wax in dodecane. In addition, the effect of wax content on gel temperature of macrocrystalline wax in dodecane is investigated. Moreover, the effect of additives (A3 and A4) on gelation point of a real crude oil UL-YS1 is investigated. Finally, the gelation temperatures of 5 wt % macrocrystalline wax in Primol 352, crude...