Search

[Display omitted] • PCM energy storage and PV/T coupled multi-source heat pump systems were combined. • The thermal performance, energy efficiency, and economy of the system were analyzed. • The performance of paraffin C17 and water as energy storage materials were compared. • The performance of six low-temperature PCMs applied to the system were analyzed. • Compared to the existing system, it saves 56 % of energy and 27.7 % of operating costs. To improve the application of renewable energy in the heating zone, as well as to address the limitations of air and water source heat pump. The study presents a PV/T (photovoltaic/thermal) coupled air–water source heat pump system integrated with phase change energy storage. A theoretical analytical model and TRNSYS simulation model of the system were developed to evaluate the thermal performance, energy efficiency and economics of the system. The performance of phase change energy storage was compared with that of water storage, and the effect of different phase change materials on the system characteristics. The results show that the coupled system achieves a seasonal performance factor of 2.3, a 56 % reduction in energy consumption, and a 27.7 % reduction in operating costs compared to a conventional gas boiler system. Comparative analysis with the water storage system showed that the system equipped with phase change materials performed well in terms of energy consumption, operating costs and heating stability. In addition, the density of the phase change material has a biased effect on the overall performance of the system. This paper can provide a reference value for the study of renewable energy heating systems in cold zone. [ABSTRACT FROM AUTHOR]

• Province-level grid parity potential of wind and solar PV power plants in China. • Techno-economic feasibility of baseload supply in hybrid renewable energy system. • Correlation analysis of system cost and resource potential and complementarity. • Projected Grid parity potential of renewable energy system for baseload supply. To promote the large-scale deployment and grid integration of renewable-based power system, this paper investigates the province-level techno-economic feasibility of wind-photovoltaic-battery hybrid renewable energy system (HRES) for baseload supply application around China. Firstly, the power generation cost and grid parity potential of province-level standalone wind and photovoltaic power plants are assessed. Then, the optimal sizing of province-level HRESs aims to minimize the net present cost and meet the reliability constraint for baseload supply, which is solved by teaching and learning-based optimization. Finally, the techno-economic comparison between different system configurations, the correlation between HRES cost-effectiveness and resource potential as well as resources complementarity, and the grid parity potential of HRES for baseload supply are quantitatively analyzed. The results reveal that: (i) 84.4% of regions in China can achieve solar photovoltaic plant-side grid parity in 2022, while only 15.6% of regions can achieve wind power plant-side grid parity; (ii) HRESs in all regions are technically feasible but not cost-effective for baseload supply; (iii) wind-photovoltaic-battery HRES is the optimal configuration for most regions, indicating that the wind-solar hybridization is more reliable and cost-effective than standalone power plants; (iv) the economic performance of HRES depends mainly on the wind-solar joint resource potentials and the supply-demand relative deviation; (v) investment cost reduction and utilization of energy curtailment are promising to help HRES achieve plant-side grid parity for baseload supply. The findings of this paper can help policy-makers and investors optimally determine the national pathway of renewable energy transition. [ABSTRACT FROM AUTHOR]