Search

• The thermal, rheological, and optical properties of ferrofluids and how they change with magnetic fields were discussed. • The utilization of ferrofluids in solar energy systems was detailed in a state-of-the-art analysis. • The recommendations aimed to optimize the use of ferrofluids and magnetic fields in energy systems to enhance performance. Solar energy technologies play a crucial role in the transition to sustainable energy sources; however, there is an ongoing challenge in optimizing their efficiency and performance. This review paper thoroughly exposes the potential for enhancing solar systems by incorporating ferrofluids and utilizing magnetic fields. It provides a comprehensive examination of the rheological, thermal, and optical properties of ferrofluids, as well as their behavior when exposed to magnetic fields. The paper emphasizes the ability of ferrofluids to improve heat transfer efficiency, adapt to changing conditions, and enable precise control in the conversion of solar energy. Furthermore, the review addresses the obstacles and limitations associated with integrating ferrofluids into solar technologies, proposing potential solutions and outlining future research directions. [ABSTRACT FROM AUTHOR]

[Display omitted] • PCM energy storage and PV/T coupled multi-source heat pump systems were combined. • The thermal performance, energy efficiency, and economy of the system were analyzed. • The performance of paraffin C17 and water as energy storage materials were compared. • The performance of six low-temperature PCMs applied to the system were analyzed. • Compared to the existing system, it saves 56 % of energy and 27.7 % of operating costs. To improve the application of renewable energy in the heating zone, as well as to address the limitations of air and water source heat pump. The study presents a PV/T (photovoltaic/thermal) coupled air–water source heat pump system integrated with phase change energy storage. A theoretical analytical model and TRNSYS simulation model of the system were developed to evaluate the thermal performance, energy efficiency and economics of the system. The performance of phase change energy storage was compared with that of water storage, and the effect of different phase change materials on the system characteristics. The results show that the coupled system achieves a seasonal performance factor of 2.3, a 56 % reduction in energy consumption, and a 27.7 % reduction in operating costs compared to a conventional gas boiler system. Comparative analysis with the water storage system showed that the system equipped with phase change materials performed well in terms of energy consumption, operating costs and heating stability. In addition, the density of the phase change material has a biased effect on the overall performance of the system. This paper can provide a reference value for the study of renewable energy heating systems in cold zone. [ABSTRACT FROM AUTHOR]

[Display omitted] • Solar-hydrogen hybrid system integration proposed for oil & gas industry. • Techno-economic-environmental optimization using novel Fick's Law Algorithm. • System sizing using Fick's Law Algorithm show an optimization in efficiency and cost. • Study shows 45% solar, 35% fuel cell, 20% gas turbine power contribution. • Renewable energy integration in oil & gas cuts CO2 emissions, boosts sustainability. The global demand for sustainable energy solutions in the oil and gas industry has stimulated interest in the integration of renewable energy sources. This paper investigates the techno-economic and environmental aspects of incorporating a solar-hydrogen-based hybrid renewable energy system (SHRES) into oil and gas processing facilities. The proposed SHRES, comprising Solar PV modules, hydrogen production and storage systems, and a gas turbine generator (PV-FC-EL-Tank-GT), aims to enhance energy efficiency and reduce the carbon footprint of energy-intensive operations. The study utilises a multidisciplinary approach, encompassing engineering, economics, and environmental analysis. The techno-economic evaluation employs detailed modelling and optimisation using Fick's Law Algorithm, ensuring efficient energy production and cost-effectiveness. Ecological assessments quantify potential reductions in greenhouse gas emissions and other environmental impacts. The technical and economic evaluation identifies the electrolyser system as the most significant cost contributor (57%). The optimised system balances energy sources with 45% from PV modules, 35% from fuel cells, and 20% from gas turbines, showcasing substantial reliance on renewable energy while maintaining required power generation. Addressing the urgent need for sustainable energy solutions in the oil and gas industry, the study highlights the potential of SHRES integration. By employing Fick's Law Algorithm, alongside with 80 % of renewable energy integration, the research optimises system components to optimise the annualised cost to be $57,539.85, decrease to zero the Loss of Power Supply Probability (LPSP), and mitigate CO2 emissions to a lowest value of 0.147 gCO2eq/kWh (by 80 %). The electrolyser system's pivotal role and the distribution of power generation sources are emphasised. This study presents a novel approach to integrating solar-hydrogen systems into oil and gas processing facilities, aiming for sustainability. The findings underscore the significance of the electrolyser system and the distribution of power generation sources in optimising the SHRES. Recommendations for renewable energy integration and potential reductions in CO2 emissions and costs are discussed, providing valuable insights for future energy policies. [ABSTRACT FROM AUTHOR]

• "Transition to sustainable multi-building energy systems can reduce greenhouse gas emissions by synergising the multiple renewable energy sources with specific structural characteristics and occupancy constraints of buildings." • "To ensuring energy flexibility and resilience, optimization strategies for multi-building energy systems vary significantly with the climatic context and potentials for integrating energy storage technologies, highlighting the necessity for adaptable designs considering future energy demands and the expansion of district-level systems." • "There is a pressing need for more user-friendly multi-building energy system simulation tools to facilitate effective long-term planning and to optimize the design and management of energy flows among multiple buildings, ensuring maximum efficiency and sustainability. The transition to clean and sustainable energy systems in the building sector is vital to reduce global greenhouse gas emissions. In this regard, shifting the focus from single buildings to clusters of buildings, such as at the district level, can provide more effective sustainable solutions. In this study, the term Multi Building Energy Systems (MBES) was introduced to represent various scales, from local communities to districts and larger urban areas. This approach reflects a more inclusive understanding of sustainability potentials for large-scale building blocks that goes beyond traditional boundaries. Such systems encompass the aggregated energy impacts of multiple buildings whether physically proximate or connected via smart grid technologies that enable two-way energy and information flows. This paper comprehensively reviewed case studies on MBES that have achieved zero-energy, nearly-zero-energy, and positive-energy performance. The literature review, facilitated by a combination of database searches and snowball search techniques, has yielded 67 relevant case studies. The findings revealed diverse pathways towards achieving optimal renewable energy production depending on the location and the climate. Integration of renewable energy sources and energy storage systems is pivotal in achieving economies of scale, reducing operational costs, and enhancing resilience and reliability of energy supply at the neighbourhood scale. Total energy use and emissions reduction could be achieved by considering the architectural features of the building stocks. The study highlighted the need for adaptive strategies in MBES implementation to address challenges such as power grid overloads and the complexities of spatial arrangement, to meet current demands, while ensuring long-term energy resilience and sustainability in evolving urban landscapes. The limited adoption of MBES simulation software suggests a need for accessible tailored software. Future research should focus on developing advanced personalised energy management and control strategies, while continuously assessing emerging technologies for improving MBES performance. [ABSTRACT FROM AUTHOR]

• HRES with PV-Wind and different types of energy storage systems. • Optimal size and efficient performance of HRES. • Bi-level mixed integer nonlinear programming optimization approach. • Real application of a stand-alone HRES in a real case study, Jordan. This paper aims to design and run a standalone hybrid renewable energy System (HRES) feeding residential building load. The suggested HRES encompasses photovoltaic panels and wind turbines as energy sources, combined with a hydrogen subsystem and a bank of batteries for energy storage. The meteorological input data includes irradiance, temperature, and wind speed for four seasonal weeks. These data sets are collected for a rural site situated in the town of Ras Munif, northern Jordan. The load profiles characterize a selected benchmark residential building. Consequently, a bi-level mixed integer nonlinear programming (BMINLP) problem is formulated to incorporate the designing problem with the energy management process. The upper level represents the sizing problem, while the lower level problem denotes the energy management strategy (EMS). Each problem has its independent objective function, constraints, and optimization variables. The EMS is an economic-based single objective optimization problem expressed as a mixed integer linear programming (MILP) problem. On the contrary, a mixed integer nonlinear programming (MINLP) approach frames the sizing problem to optimize a techno-economic-based multi-objective function. The interaction between the two problems is that the lower problem is an embedded constraint of the upper problem. Moreover, the candidate solutions from the upper problem are treated as fixed parameters in the lower problem. A multi-objective genetic algorithm is used to execute the overall problem by the MATLAB toolbox. The technical and economic performance parameters, including the investment cost, maintenance, operating costs, and others, are assessed based on the best findings. The key finding demonstrates that the summer week has the lowest total cost and energy loss factor, with around 132,000 $ and 0, respectively. Furthermore, the findings reveal that the entire system's energy loss factor for each sample period is less than 0.0009. This value is substantially less than the permitted limit of 0.01. [ABSTRACT FROM AUTHOR]

[Display omitted] • Feasibility of using organic wastewater as renewable energy source is verified. • ＞99% COD, TOC removal rate in the experimental platform. • Up to 78.75% of the energy recovery efficiency of the SCWO system. The degradation of high concentration organic wastewater and the recovery of energy using supercritical water oxidation (SCWO) technology have the potential to become viable in the future. High concentration organic wastewater contains a significant amount of energy. This paper focuses on utilizing high concentrated wastewater as a renewable energy source, from an energy system perspective, an experimental rig was designed to determine the optimal working conditions. The experiments were conducted with an oxidation coefficient of 1.1, a flow rate of high concentration organic wastewater of 9 ml/min, a heating temperature of 400 °C, and a reaction pressure of 25 MPa. Under these conditions, the COD and TOC removal rates of the high concentration organic wastewater were found to be 99.383 % and 99.876 % respectively. Additionally, the phenomenon of "Abnormalities in pressure sensitivity" observed during high concentration organic wastewater the experiment was further explained through additional experiments. Finally, by comparing the experimental energy recovery with the simulation results, an energy recovery efficiency of 78.95 % was achieved. The feasibility of the simulated energy recovery in practice was verified, confirming the potential to convert the previous energy-consuming wastewater treatment process into a productive one. This study provides a theoretical and experimental foundation for further related research. [ABSTRACT FROM AUTHOR]