Search

Lime mud, a kind of industrial waste that produced in paper mill, was proposed as CO2 sorbent in calcium looping process. The carbonation performance of the lime mud was investigated in a dual‐fixed bed reactor (DFR) and a thermogravimetric analyzer (TGA). The carbonation kinetics of the lime mud in the chemical reaction controlled stage was analyzed by a surface reaction‐controlled kinetic model. The results show that the lime mud presents much poorer carbonation performance during the chemical reaction controlled stage compared with the limestone, mainly due to the high content of chlorine in the lime mud. A prewash treatment process was used to decrease the chlorine content to mitigate the sintering of the lime mud when calcined at high temperature. After prewash treatment, the prewashed lime mud shows much higher CO2 capture capacity during the chemical reaction controlled stage compared with the lime mud. A prolonged carbonation process successfully further enhances the microstructure and improves the carbonation performance of the prewashed lime mud in the chemical reaction controlled stage. The lime mud can be effectively used as CO2 sorbent in calcium looping process after prewash treatment and the following prolonged carbonation treatment. [ABSTRACT FROM AUTHOR]

Supercritical carbon dioxide fracturing is an environmentally friendly anhydrous method. To study the propagation process during supercritical carbon dioxide fracturing, a full three‐dimensional model, coupled rock deformation, fluid transport, heat conduction, dynamic changes of carbon dioxide physical parameters, to investigate the process of fracture propagation during supercritical carbon dioxide fracturing, is established by the three‐dimensional boundary element method, the finite volume method, and finite difference method. And to solve the multiple physics coupling problems, a fully implicit solution and Newton‐Raphson iteration method are used. On the basis of this model established in this paper, the influential factors of supercritical carbon dioxide fracturing are analyzed. The results show that both of the reservoir temperature and the original in situ stress are important for carbon dioxide fracturing; The higher the reservoir temperature and the lower the initial in situ stress is, the longer and wider the fracture will be. The temperature of carbon dioxide at bottom is of no significance to the fracture length, fracture width, and the bottom hole pressure. A growing injection rate will lead to the increase of the fracture length and fracture width. This study would provide a reference for the fluid phase control of supercritical carbon dioxide fracturing technology. [ABSTRACT FROM AUTHOR]

Coal seam with low permeability is widely distributed in China. Injection of flue gas (N2:CO2 = 0.85:0.15) is an effective approach to improve coal seam gas drainage efficiency. This process relates complex responses among ternary gases (CH4, CO2, and N2) competitive sorption on coals, gas diffusion, gas‐water migration by means of two‐phase flow, and coal deformation. In this paper, an improved hydraulic‐mechanical model coupling above interactions is established for flue gas injection enhanced gas drainage. This model is used to simulate flue gas enhanced drainage by finite element method. The sensitivity analyses of key factors are made to recovery a better understanding on the processes controlling flue gas enhanced drainage. Results show that the flue gas enhanced drainage can indeed improve the efficiency of gas extraction and reduce the gas pressure to the required value in a shorter duration. Due to the competitive adsorption and gas sweeping effect of injected flue gas, CH4 is driven toward drainage borehole, and CH4 pressure and content near the injection borehole decrease faster than that near the drainage borehole. The peak CH4 pressure laterally moves from the injection borehole to the drainage borehole. Higher injection pressure, initial permeability, and smaller sorption affinity ratios may lead to greater CH4 production rate at early drainage stage, but smaller CH4 production rate at late stage. The factors controlling the behavior of flue gas enhanced drainage are initial permeability, injection pressure, and sorption affinity ratios in order. This work offers useful framework to investigate important technical challenges associated with enhanced mine gas drainage, as well as unconventional gas development. [ABSTRACT FROM AUTHOR]

The global warming is directly related to the increased greenhouse gas emissions from both natural and anthropogenic origins. There has been a drastic rise in the concentration of CO2 and other greenhouse gases since the industrial revolution primarily due to the intensifying consumption of fossil fuels. With the need to reduce carbon emissions and mitigate global warming certain strategies relating to carbon capturing and sequestration are indispensable. This paper comprehensively describes several physicochemical, biological and geological routes for carbon capture and sequestration. The trend of the increase in greenhouse gases over the years is illustrated along with the global statistics for fossil fuels usage and biofuels production. The physicochemical carbon capturing technologies discussed include absorption, adsorption, membrane separation and cryogenic distillation. The algal and bacterial systems, dedicated energy crops and coalbed methanogenesis have been vividly explained as the biological routes for carbon sequestration. The geological carbon sequestering route centers on biochar application and oceanic carbon storage. A systematic survey has been made on the origin and impact of greenhouse gases along with the potential for sequestration based on some fast-track and long-term sequestration technologies. [ABSTRACT FROM AUTHOR]