Search

The paper investigates the heat transfer in the exploitation of offshore argillaceous‐silt natural gas hydrate reservoirs considering sand control. The temperature prediction model is established in this investigation. The coupled pressure‐temperature model of the flowing fluid inside the wellbore is also presented. The sand control for argillaceous‐silt natural gas hydrate reservoirs mainly brings two effects into the temperature and pressure profiles simulation, including the moderate sand control and the Joule–Thompson effect. The moderate sand control is reflected by the volume and particle size of produced sand into the wellbore in the mathematical derivation. The Joule–Thompson is considered in the model due to the small diameter of sand control screens. The experiment is designed to measure the pressure drop caused by various mesh diameters of sand control screens. Subsequently, the regression relationship between the pressure drop and the mesh diameter is concluded to calculate the temperature change at the sand control screen. The simulation of heat transfer helps to analyze secondary hydrate formation risk in the wellbore. The proposed model identifies the high‐risk location of the secondary hydrate formation. The sand control effect and well geometry effect are discussed quantitatively. The strict sand control in the argillaceous‐silt natural gas hydrate (NGH) sediment exploitation reduces the risk of secondary hydrate formation significantly; however, it also has a negative effect on natural gas production. To balance the sand control and the prevention of secondary hydrate formation risk, it is suggested to install the heating electrode in the high‐risk location to ensure flow safety with acceptable sand control precision. The heat provided by heat electrodes is calculated by the model presented in this paper. The model can be used to determine the proper arrangement of heat electrodes. The paper also describes the secondary hydrate formation by adjusting the well geometry. The formation depth of the NGH reservoir and the sea interval should be considered in the risk analysis of the secondary hydrate formation. Additionally, the effects of wall thickness and wall thermal properties are evaluated and discussed. It is recommended to optimize the riser thickness with a small thermal conductivity value to minimize the secondary hydrate formation risk, which is more efficient compared to adjusting the cement sheath. [ABSTRACT FROM AUTHOR]

As the natural gas hydrate (NGH) resources show a bright future, more and more commercial and technical focuses have been devoted to this area. The low productivity, the sanding problem, and the poor economic performance are vital problems hindering the long‐term commercial exploration and development of NGS sediments. Among all these problems, the sanding problem can aggravate the low productivity and the poor economic efficiency problems. Therefore, it is necessary to investigate and tackle the sanding problem for the safe, long‐term, and large‐scale commercial development of offshore NGH resources. The sanding problem of the NGH sediment is highly related to the mechanical behavior of sediment. The main influencing factors are discussed, which are hydrate saturation, effective confining pressure, sand content, hydrate distribution, and multiple‐physical fields. This article summarizes the current research achievements systematically to determine how these factors affect sand production in NGH sediments. Besides the macrolevel about mechanical behaviors of NGH sediment, the sand motion modeling is also included in this review. The source of sand production is the free‐moving sand which comes from formation deformation. The review compares most commonly used yield criteria and then recommends a proper one for NGH sediments. The paper subsequently discusses the common investigation methods for the sanding problem in this area, including numerical simulation and experiments. The design and effect of sand control techniques have also been reviewed and discussed. According to the review results, the paper concludes the current research drawbacks and generates suggestions for future research. The novel methods of sand control investigation are machine learning and optimization methods. [ABSTRACT FROM AUTHOR]

Intelligent wells equipped with the interval control valve (ICV), which have the potential applications to significantly improve oil production or control the water production of wells and fields, are more and more widely utilized in the oilfields. The radial metal seal of an ICV is intended to isolate the flow of produced fluids between the casing annulus and the well tubing. The contact mechanical behaviors of the radial metal seal are essential to the structural design and reliability of ICVs in the intelligent well. In this paper, the two‐dimensional axisymmetric assembly of the radial metal seal and the closure member is abstracted as a combination of interference fit model and cantilever beam model. Based on that, the related theoretical model, between the radial metal seal's contact stress and its independent variables, has been derived. Next, numerically simulations of contact stress between the radial metal seal and the closure member for different independent variables are conducted by the finite element method (FEM) to validate the theoretical model. It is found that the mean absolute value of relative error between the numerical and theoretical results of the contact stress is approximately 10%. Additionally, the structural parameters of the radial metal seal are proposed with the absolute value of relative error <10%. Furthermore, the value of the contact stress based on the cantilever beam model can be used to calculate an approximation theoretical solution. In summary, the proposed theoretical model provides a foundation for the design, improvement, and selection of radial metal seal under the known oilfield conditions. [ABSTRACT FROM AUTHOR]

Annular pressure buildup (APB) is induced by high‐temperature tubing fluid heating the trapped annular fluid, which leads to liquid thermal expansion at the production stage in deepwater wells. Casing would be burst or collapsed without APB mitigation. A novel recovery relief method was adopted to mitigate APB through the principle of differential pressure. To assess the application effect of the method, APB prediction model and pressure relief threshold determination method were proposed, where the transient heat transfer and volume and pressure coupling were involved. The laboratory test of the principle prototype was conducted so that the feasibility of the recovery relief method was validated. The numerical APB mitigation effect was simulated by the field example. The production simulation results indicated that the high‐temperature‐induced APB caused casing failure. The simulation of APB mitigation with both inward and outward directions demonstrated that the casings using outward mitigation method were safer with lower safe factor. Besides, comparing the mitigating effect to the rupture disk, the recovery relief method had more maximum allowable APB of annulus A. Additionally, compared to other 11 ordinary mitigation methods with the qualities of engineering reliability, technology feasibility, and economy, the recovery relief method had best mitigation performance. Therefore, the recovery relief method was recommended for APB mitigating practice. [ABSTRACT FROM AUTHOR]