Search

The cracked chevron notched semi-circular bend (CCNSCB) method has been utilized in split Hopkinson pressure bar (SHPB) tests to measure the rock dynamic mode I fracture toughness. However, the measuring principle has never been thoroughly evaluated. In this study, a three-dimensional discrete element method has been employed to numerically investigate the dynamic fracture mechanism of CCNSCB specimens in SHPB testing considering different loading rates and supporting spans. Our results show that, even if the dynamic force balance can be efficiently satisfied, the conventional quasi-static analysis can still be questionable. For specimens with smaller supporting spans, the developing crack fronts are rather curved during the loading process, and the critical crack length is highly dependent on the loading rates. While for specimens with a large supporting span, the crack profiles are less affected and the critical crack fronts are finely confined within the chevron ligament with few undesirable damages. Thus, the CCNSCB method with a larger supporting span appear to be sound in the SHPB tests for measuring dynamic mode I fracture toughness of rocks. [ABSTRACT FROM AUTHOR]

• Rate-dependent cracking behaviors of single-flawed rock specimen under dynamic loading are numerically observed via DEM simulation. • Tensile wing cracks dominate specimen failure under low strain rate, while anti-wing cracks and shear cracks are prevalent under high strain rate. • Different initiation locations of tensile wing cracks are explained by stress filed visualization and theoretical analysis. • The initiation angles of tensile wing cracks are predicted via GMTS criteria, and the length of FPZ increases with increasing strain rate. This paper numerically investigated the rate-dependent progressive cracking behaviours of single-flawed rock specimens in split Hopkinson pressure bar (SHPB) tests. First, a 3D numerical SHPB system is established based on the discrete element method (DEM). By comparing with our laboratory experiments, micro-parameters of the DEM model are calibrated, which guarantees the reliability of the numerical simulations results. Via slice-cutting view, the inner and surface progressive cracking processes are explicitly revealed and compared, which compensates some defects in laboratory tests. Our numerical simulation results show that the progressive cracking behaviours of the single-flawed rock specimens exhibit evident rate dependence. Under low strain rates, tensile wing cracks dominate the entire cracking process, and only a few shear cracks appear during the post-peak stage. In contrast, under high strain rates, tensile wing racks are significantly suppressed, while anti-wing cracks and shear cracks are fully developed, leading to the final X-shaped failure modes. In addition, progressive cracking behaviours of the single-flawed rock specimens with different flaw inclination angles are assessed. Via stress field visualization and theoretical analysis, the different initiation locations of tensile wing cracks are explained. Furthermore, based on the generalized maximal tangential stress (GMTS) criteria, the fracture initiation angles of tensile wing cracks are predicted. The results show that the fracture initiation angles and the fracture process zone (FPZ) are significantly affected by the strain rate. The length of FPZ under dynamic loads is evidently longer than that under static loads, and the length of FPZ generally increases with an increasing strain rate, exhibiting evident rate dependence. [ABSTRACT FROM AUTHOR]