Search

Abstract: Campania Region (Italy), one of the most densely populated areas in Europe, is probably the one with the highest risk of landslide. A large part of the region is covered by unsaturated cohesionless pyroclastic deposits subjected to rainfall-induced landslides. According to experience, these can display different features and magnitude. The most catastrophic landslides are liquefied debris flows which periodically occur on steep slopes, causing death and destruction in areas located downslope. Therefore, zoning of those areas which can be the source of liquefied debris flow is necessary. The paper reports some useful elements for zoning based on infinite slope analysis, accounting for the results of recent research on the mechanics of rainfall-induced landslides in pyroclastic soils. [Copyright &y& Elsevier]

Shallow flowslides, debris flows and debris avalanches are rainfall-induced landslides consisting in the shear failure of few metres of soils (or in some cases even less than a metre), which greatly increase downslope in volume and flow velocity. The southern Italian region of Campania has been historically affected by such events involving pyroclastic soils mainly resting on steep carbonate slopes. This paper deals with the analysis of factors influencing the occurrence of flow-like landslides, adopting the Lattari Mts. in Campania as a case study. The results of two investigation campaigns carried out in the area allowed effective large-scale geological and geotechnical characterization to be set up. Stratigraphic profiles, mean physical properties and typical friction angles at the critical state for each soil layer were investigated. The effect of suction on peak and critical shear strength, whose drop is responsible for soil failure, was analysed. Using detailed information on both the stratigraphic and geotechnical features of the soils involved in past flow-like landslides, typical triggering models were selected, representing locally recurrent geomorphologic conditions at the basin scale. The identified models were adopted for slope stability analyses carried out on four cross-sections of flowslides occurring prior to the event, to back-analyse the triggering conditions. From the evidence on the triggering mechanisms and the results of analyses, the infinite slope approach is not always suitable to model slope stability conditions properly, because the onset of landslides is also affected by local topographic and stratigraphic factors. • Flow-like landslides can be triggered due to local features. • Local topographic irregularities can be represented by roads, tracks, scarps and terraces. • Infinite slope model can be suitable to model only slopes characterized by angles higher than 39–40°. • Local natural and anthropic factors can affect the results of slope stability analysis. • The triggered landslides occurred when the 3-months precedent rainfall exceeded the 40 years average value. [ABSTRACT FROM AUTHOR]