Search

Transversely isotropic rock composed of two interbedded layers has been rarely studied, although landslides frequently occur in bedded rock masses. With reference to the interbedded rock mass in the Miaowei Reservoir area of Yunnan Province, China, this study prepares transversely isotropic specimens made of two interbedded materials to investigate the fracture and mechanical behaviors of interbedded rock. The effect of the bedding plane dip angle and the application of the findings to an anti-dip interbedded rock slope are also studied. Specifically, two groups of isotropic specimens and five groups of transversely isotropic specimens are tested in a series of triaxial compressive tests; based on these tests, the crack types, failure modes and mechanical parameters are analyzed, and one damage model and its application to the failure probability analysis of an anti-dip interbedded rock slope are investigated. The experimental results show that twelve crack types, eight failure modes and five axial stress-strain curve types can be summarized and are significantly affected by the dip angle. The recognition of these crack types and failure modes can improve the qualitative instability analysis of bedded rock masses in the reservoir area, and five mechanical parameters, including peak stress, strain related to peak strength, residual strength, elastic modulus and Poisson's ratio, exhibit fluctuating variation trends versus the dip angle and confining stress due to the influence of the dip angle. Two groups of theoretical curves from the proposed damage model correspond with the pre-peak features of the test stress-strain curves. The proposed failure probability model considering rock damage shows good practicality when applied to an anti-dip interbedded rock slope; the slope displays discrete failure probabilities in various parts, e.g., the slope toe, slope shoulder and weaker layer show higher failure probabilities, and the relaxation behavior increases the failure probabilities and gradually eliminates the discreteness. Relevancy analysis shows that the strength of transversely isotropic rock is more sensitive to the elastic modulus, dip angle of bedding plane, confining stress and composition of the rock. • Transversely isotropic rock made of two interbedded materials is prepared; • Fracture behaviors and damage model of simulated transversely isotropic rock are investigated; • Instability analysis of an anti-dip interbedded rock slope is conducted. [ABSTRACT FROM AUTHOR]

Toppling is a widespread failure mode in natural and excavated anaclinal rock slopes and threatens the construction and operation of important infrastructure such as hydropower and transportation corridors in southwest China. Therefore, comprehending the mechanisms underlying toppling is essential for relevant landslide prediction and prevention. In this study, we developed a physical model of an anaclinal rock slope using the Linda landslide as a site case. Based on field monitoring using Gopro cameras, high-speed cameras, strain sensors, stress sensors, and acoustic emission systems, the evolution of the anaclinal rock slope model was analysed. The reliability of the physical model test was verified by comparing the deformation characteristics of the landslide site with those of the slope model. The monitoring results suggested that the slope deformation process could be divided into five stages: an initial interlayer dislocation stage, a deformation initiation stage, a crack generation and propagation stage, a crack penetration stage, and a failure stage. The rock mass could be categorised into four deformation zones: the fresh zone, weakly toppled zone, moderately toppled zone and highly toppled zone. Acoustic emission sensors deployed near the failure-prone region held the potential to serve as early warning indicators for landslides on anaclinal rock slopes. Valley incision played a significant role in the formation of sliding surfaces in anaclinal rock slopes. Furthermore, the model experiment observed multiple failure surfaces and the failure behaviour of the landslide rock mass, shedding light on their connection to the deformation process and the stress state in the model. The study revealed the deformation and failure mechanism of an anaclinal rock slope from many perspectives and deepened our understanding of toppling type of landslides. • Detailed study of Linda landslide's background and structure. • In-depth analysis of anaclinal rock slope using multi-field monitoring. • Summarized complex anaclinal rock slope failure mode and rock mass features. • Emphasized valley incision's role in forming sliding surfaces on anaclinal slopes. • Revealed the generation of multiple failure surfaces during toppling deformation. [ABSTRACT FROM AUTHOR]

Abstract Recent research has paid little attention to the difference in shear strength between discontinuities with different joint wall material (DDJM) and discontinuities with identical joint wall material (DIJM) and what are the controlling factors of shear properties of DDJM. Bedding planes between argillaceous limestone and mudstone in the Badong formation in the Three Gorges area of China were investigated using physical model tests. The effect of joint wall material combination on the shear properties of DDJM was first revealed by conducting tests on a series of artificial joint specimens that were made of different joint wall materials and with varying joint surface topographies under different normal stresses. The results indicate that: the peak shear strength of DDJM is not equal to the lower peak shear strength of DIJM for two joint wall materials of the DDJM, even so it is closer to the lower peak shear strength than to the higher one; effect of joint roughness and normal stress on peak shear strength of DDJM is similar with DIJM; effect of joint wall material combination on peak shear strength of DDJM is greater with larger roughness and higher normal stresses. Based on the data acquired from the physical model tests, a new empirical equation to estimate the peak shear strength of DDJM was developed. The capability of the equation was validated by comparing estimates with data from direct shear tests on natural DDJM samples gained from the Badong formation. Finally, the proposed empirical equation was applied to the stability analysis of a rock slope in the Badong formation. Highlights • Discontinuities with different joint wall material (DDJM) were studied. • Physical model tests were performed to investigate shear properties of DDJM. • Effect of joint material combination was first revealed. • A new equation to estimate shear strength of DDJM was proposed and validated. • The proposed equation was applied in the stability analysis of a rock slope. [ABSTRACT FROM AUTHOR]