Search

Concrete-filled double skin steel tubular columns with large hollow ratios (LHR-CFDST) have been commonly researched in the past few years. The excellent performance of this structure renders it promising as a novel form of wind turbine tower. Increasing the diameter-to-thickness ratio is one efficient way to reduce steel consumption as the size of this engineering structure continues to expand. There is a paucity of research on thin-walled LHR-CFDST. Meanwhile, these structures may be susceptible to local buckling without stiffening measures. Furthermore, the size effect of this type of structure is more complicated. This paper reports the first experimental investigation on super-sized thin-walled LHR-CFDST columns under combined compression-torsion-shear-bending loads. Two LHR-CFDST columns with varying stud spacings are discussed. Investigations are conducted into failure modes, local buckling behaviors, load-strain responses, and a few popular mechanical indices. According to the test results, the specimen with smaller stud spacing has an 8.1% greater ultimate bearing capacity. It is assumed that a more intensive stud arrangement can delay the onset of local buckling, thereby increasing the peak load. Besides, the arrangement of the studs leads to an obvious effect of section confinement, thus improving the overall performance of the specimens. The failure modes and load-displacement relationships simulated by the FE models agree well with the experimental results. Then, a modified method for predicting the ultimate strength of LHR-CFDST based on the previously summarized formulae for CFST under compression-bending-shear-torsion is proposed and utilized for the evaluation of two specimens in this research. Since the tested value of the specimen with narrower stud spacing is higher by 5.6% than the predicted value, it can be concluded that the large-scale thin-walled LHR-CFDST may be evaluated using this method, complemented by appropriate stiffened measures. • Two thin-walled CFDST columns were tested subjected to combined loads. • The stiffened studs greatly postpone the appearance of local buckling. • The studs produces a clear impact of section confinement, which enhances the specimen's overall performance. • This experiment utilizes a novel mutual verification model. • A modified method for CFDST under combined loads is proposed and utilized for the evaluation of two specimens. [ABSTRACT FROM AUTHOR]

• Two large-scale thin-walled CFDST columns with different stud spacing were tested under axial compression. • The stiffened studs delayed the occurrence of local buckling in these specimens significantly. • The arrangement of the studs leads to a obvious effect of section confinement, thus improving the overall compressive performance of the specimen. • The variability of the Poisson's ratio of concrete and steel during loading resulted in different stresses on the studs. • The current design specifications for calculating the peak load of CFDST columns are modified and used for the evaluation of the two large-scale thin-walled CFDST specimens in this study. Wind turbine towers offer good application potential for concrete-filled double-skin steel tubular columns with large hollow ratios (LHR-CFDST). With the increasing size of this engineering structure, the requirement to reduce construction expenses can be met by enhancing the diameter-to-thickness ratio of steel tubes. Few studies have been conducted to report on thin-walled LHR-CFDST columns. Meanwhile, local buckling and size effect shall be considered for this type of structure. Based on this, the first experimental investigation on large-scale stiffened thin-walled LHR-CFDST columns under axial compression is reported in this paper. Two large-scale thin-walled LHR-CFDST columns with different stud spacings are discussed. Failure modes, local buckling behaviours, load-strain responses, and some common mechanical indexes are investigated. According to the test results, adding studs was an effective method to increase the ultimate capacity of LHR-CFDST columns, as evidenced by the 16.6% increase in peak load for the specimen with smaller stud spacing than the other. Besides, the arrangement of studs leads to an obvious effect of section confinement, thus improving the overall compressive performance of the specimens. Then, four existing specifications all give a conservative prediction for the ultimate capacity of the specimen with smaller stud spacing, indicating that the large-scale thin-walled LHR-CFDST can be evaluated utilizing the present specifications with suitable stiffening measures. [ABSTRACT FROM AUTHOR]