Search

In this paper, a mechanics based analytical truss model is proposed to predict the shear strength and deformation of conventionally reinforced coupling beams with span-to-height ratios less than 1.75 (referred to as short coupling beams). The model considers the yield of only parts of stirrups, and its load path is composed of a direct main strut connecting the compression zones at both ends of the beam and secondary struts balancing with stirrups. By satisfying the compatibility condition at the intersection node of the struts, the assignment of the applied shear load in the main and secondary struts, as well as the shear load-transverse displacement relationship of the beam, are determined. The shear strength predictions by the truss model are compared with test results of 37 conventional reinforced short coupling beams, which shows that it can accurately predict the shear strength with a coefficient of variation (COV) of 0.052, while the predictions provided by ACI 318-19 and GB 50010-2010 are relatively inaccurate (the COVs are 0.19 and 0.21, respectively). In addition, the skeleton curves of 27 short coupling beams are calculated by the truss model, and the results show that the predictions are in good agreement with the test results. In order to simplify the calculation, a simplified model is proposed based on the refined truss model. Although the accuracy of the simplified model is slightly reduced (the COV is 0.071), it is still significantly higher than those of the design codes. Based on the simplified model, a standardized design method, which indirectly considers the beam deformation capacity, is provided for practical shear design.

In reinforced concrete (RC) column footings, the soil stiffness can significantly affects the punching shear strength of the foundation slab. The present study conducted eccentric compression tests on three RC column footings considering the complex interaction between the soil and structure, and investigated the load-carrying capacity, displacement distribution, reaction distribution, failure mode, crack development, and strain distribution. The test parameter was flexural reinforcement ratio in the foundation slab. The test results showed that the footing specimen with lower reinforcement ratio was susceptible to brittle punching shear failure, and the flexural reinforcement ratio affected the crack distribution and the spalling of concrete cover. Since only one specimen was used in each flexural reinforcement ratio, however, the test results should be carefully considered. On the basis of the test results including existing studies, the effect of design parameters on the punching shear strength was evaluated. As a result, a new method was developed to predict the punching shear strength by addressing the eccentric compression force.