Search

Identifying suitable zones for surface water storage and groundwater recharge is needed to enhance irrigation water availability. This study was undertaken to map rainwater harvesting (RWH) potential zones using geospatial tools and analytic hierarchy process (AHP). The suitable locations for RWH were also mapped using the Boolean logic concept. The surface runoff is a vital factor to demarcate the appropriate zones for RWH. The curve number approach was used to estimate the surface runoff potential. The runoff coefficient (RC) map was generated based on rainfall and surface runoff depth. Weights have been allocated to selected themes of RC, drainage density, and slope. The themes were integrated using geographic information system (GIS) and AHP to demarcate the suitable zones for RWH. The derived RWH potential map was categorized into zones like "very good," "good," "moderate," "poor," and "very poor" with an aerial extent of 14.3%, 24.7%, 28.3%, 20.2%, and 12.6%, respectively. The area suitable for farm ponds was found to be about 9% (408 km 2 ), 13% (329 km 2 ), and 4% (244 km 2 ) in Mirzapur, Chandauli, and Sonbhadra districts, respectively. Furthermore, 22, 15, and 21 locations were found suitable for check dams in Mirzapur, Chandauli, and Sonbhadra districts, respectively. At a large scale, effective planning of water management strategies based on multicriteria decision analysis and GIS offers increased availability of surface and groundwater resources and may help for enhancing the agricultural land use options. The higher resolution maps may be further utilized to plan RWH strategies at village level., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Production of quality jute fibre primarily depends on the retting process of jute. However, the quality of retting water is of great concern because of the scarcity of available water bodies for retting. A study conducted on physico-chemical and microbiological changes in retting water (pre- and post-retting) from four intensively jute-growing districts namely Nadia, North 24 Parganas, Hooghly and South Dinajpur of West Bengal, India, during jute retting. The post-retting water samples recorded lower pH (6.22 to 7.08) and higher EC (electrical conductivity) (0.509 to 0.850 ds/m) compared with pre-retting water samples (pH 6.63 to 7.44; EC 0.197 to 0.330 ds/m) collected from all the four districts under study. The biological oxygen demand (BOD) and chemical oxygen demand (COD) increased several folds in the post-retting water samples indicating very high microbial growth and activities and depleted oxygen level compared with pre-retting water. The Ca + Mg (calcium + magnesium) content in pre-retting water was high (24.15 to 36.60 ppm) which raised further (61.30 to 103.67 ppm) in post-retting water, while the bicarbonate content also increased and ranged between 2.72 and 6.81 me/l in post-retting water compared with its status in pre-retting water (1.30 to 3.15 me/l). The post-retting water was found to be a rich source of nutrients like nitrogen (N), phosphorus (P), iron (Fe), manganese (Mn), zinc (Zn) and copper (Cu) which increased substantially because of jute retting as compared with their status in pre-retting water. The population of pectinolytic, xylanolytic, cellulolytic and ligninolytic bacterial cfu (colony forming unit) increased by 1.5 times in post-retting water as compared with pre-retting water, because these specific bacterial population were involved in the degradation of pectin, xylan, cellulose and lignin during retting of jute. Thus, post-retting water can be judiciously used as a potent source of primary, secondary and micronutrients for succeeding crops besides having higher BOD and COD as a result of higher microbial growth related to jute retting.

Sitapur district in the Uttar Pradesh (U.P.) state of northern India has been observed to consume large amounts of WHO classified "extremely" and "highly hazardous" pesticides, in rice crop, posing significant health and environmental threats. Keeping in view this problem, integrated pest management (IPM) modules were synthesized for rice crop and then compared with non-IPM/farmer's practice (NIPM). This study assisted in identifying pesticides with reduced risk to the environment. To measure and compare risks, environmental impact quotient (EIQ) has been used as a pesticide risk indicator model, between IPM and NIPM programs. Using this model, the field EIQ values (EIQ field use rating or EIQ-FUR), for 32 commonly used pesticides in the region, were evaluated based on dosage, frequency, and percent active ingredients present in the pesticide formulations. The results conclude that copper oxychloride (CuOCl 2 ) (50 WP at 1.25 kg/ha) and mancozeb (75 WP at 1.25 kg/ha) were the most detrimental to arthropod parasitoids and were the highest contributors to environmental risk (13-16%), in rice crop. This is based on the comparison of total dosage and active ingredients of pesticides applied under IPM and NIPM, with the total field EIQ values. The IPM modules were observed to have least impact on natural enemies with 30-40% increase in population, while keeping the weed population below 10%. NIPM, on the other hand, had resulted in 20% reduction in crop yields, 50% reduction in biodiversity, and about 150% increase in weed population, relative to the control (untreated) rice fields. Moreover, NIPM practices had been observed to pose 56% greater risk as per the total field EIQ values (62 for IPM and 141 for NIPM). The observations concluded that the EIQ model is a useful tool and can be easily used by the pesticide managers for assessing the risk against NIPM.

The resource-intensive agriculture involving use of chemical fertilizers, irrigation, and tillage practices is a major cause of soil, water, and air pollution. This study was conducted to determine whether integrated use of nutrient, water, and tillage (reduced) can be manipulated to improve the population of plant growth promoting rhizobacteria (Azotobacter, Bacillus, and Pseudomonas) to enhance soil fertility and yield. The study was conducted in the Indo-Gangetic plain (IGP) region of India, where resource-intensive agriculture is practiced. Various combinations of chemical (urea) and organic fertilizers (farmyard manure (FYM), biofertilizer, and green manure) were used on replicated field plots for all the experiments. The effect of integrated resource management (IRM) on activities of Azotobacter, Bacillus, and Pseudomonas and its relation to the yields of rice and wheat crops in subtropical soils of IGP region were also observed. The increased population of all the three microbes, namely, Azotobacter (5.01-7.74 %), Bacillus (3.37-6.79 %), and Pseudomonas (5.21-7.09 %), was observed due to improved structure and increased organic matter in the soil. Similarly, kernel number and 1000 kernel weight were found increased with sole organic N source, three irrigations, and conservation tillage. Thus, it was found that the IRM practices affect the environment positively by increasing the population of beneficial soil microbes and crop yield as compared to high-input agriculture (conventional practices).

The study is the first documentation of seasonal variations in species composition, abundance and diversity of tintinnid (Ciliata: Protozoa), in relation to water quality parameters along the stretch of the Hooghly (Ganges) River Estuary (HRE), eastern coastal part of India. A total of 26 species (22 agglomerated and 4 non-agglomerated) belonging to 8 genera has been identified from 8 study sites where Tintinnopsis (17 species) represented the most dominant genera, contributing up to 65 % of total tintinnid community followed by Tintinnidium (2 species), Leprotintinnus (2 species) and Dadayiella, Favella, Metacylis, Eutintinnus and Helicostomella (each with solitary species). The maximum (1,666 ind. l(-1)) and minimum (62 ind. l(-1)) abundance of tintinnids was recorded during post-monsoon and monsoon, respectively. A distinct seasonal dynamics in terms of biomass (0.005-2.465 μg C l(-1)) and daily production rate (0.04-3.13 μg C l(-1) day(-1)) was also noticed, accounting highest value during pre-monsoon. Chlorophyll a and nitrate were found to be potential causative factors for the seasonal variations of tintinnids as revealed by a stepwise multiple regression model. The result of ANOVA showed a significant variation between species abundance and months (F = 2.36, P ≤ 0.05). k-dominance curves were plotted to determine the comparison of tintinnid dominance between the investigated stations. Based on a principal component analysis (PCA), three main groups were delineated with tintinnid ciliates and environmental parameters. The changes in lorica morphology in terms of temperature and salinity, recorded for three dominant species, provided information on the ecological characteristics of the species assemblage in this estuarine system.

The present work revealed that salinity, water temperature, and food availability were the most crucial factors affecting the abundance of larvae and their settlement as macrofouling community in the coastal waters of Kalpakkam. Quantitative as well as qualitative results showed that late post-monsoon (April-May) and pre-monsoon (June-September) periods were found to be suitable periods for larval growth, development, and survival to adult stages for most of the organisms. Clustering of physico-chemical and biological (including larval and adult availability) data yielded two major clusters; one formed by northeast (NE) monsoon months (October-January) and the other by post-monsoon/summer (February-May) months, whereas; pre-monsoon months (June-September) were distributed between these two clusters. Among all the major macrofouler groups, only bivalves established a successful relationship between its larval abundance and adult settlement. Principal component analysis indicated good associations of bivalve larvae with polychaete larvae and adult bivalves with adult barnacles. However, biotic relation between ascidians and bryozoans was observed both in the larval as well as adult community.

A sequential extraction procedure was carried out to determinate the concentrations of 11 elements (Al, As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn) in different geochemical phases of sediments collected along the Hugli (Ganges) River Estuary and in the Sundarban mangrove wetland, eastern coastal part of India. The chemical speciation of elements was determined using the three-step sequential extraction procedure described by the European Community Bureau of Reference. Total metal concentration was determined using a microwave-assisted acid digestion procedure. Metal concentrations were near the background level except for As for which a moderate pollution can be hypothesized. The mobility order of the metals was: Cd > Mn > Cu > Zn > As > Co > Pb > Ni > Fe > Cr > Al. The highest percentage of Cd (>60%) was found in the most labile phase. Residual fraction was prevailing for Fe, Cr and Al, while Pb was mainly associated with the reducible fraction. Data were compared with Sediment Quality Guidelines to estimate the relationship between element concentrations and adverse biological effects on benthic community, finding the possibility of some toxic effects due to the presence of As in the entire studied area and Cd, only in Calcutta.

This study was performed to elucidate the distribution, concentration trend and possible sources of total mercury (Hg(T)) and methylmercury (MeHg) in sediment cores (<63 μm particle size; n = 75) of Sundarban mangrove wetland, northeastern part of the Bay of Bengal, India. Total mercury was determined by atomic absorption spectrometry (AAS) in a Leco AMA 254 instrument and MeHg by gas chromatography-atomic fluorescence spectrometry (GC-AFS). A wide range of variation in Hg(T) (0.032-0.196 μg g(-1) dry wt.) as well as MeHg (0.04-0.13 ng g(-1) dry wt.) concentrations revealed a slight local contamination. The prevalent low Hg(T) levels in sediments could be explained by sediment transport by the tidal Hugli (Ganges) River that would dilute the Hg(T) values via sediment mixing processes. A broader variation of MeHg proportions (%) were also observed in samples suggesting that other environmental variables such as organic carbon and microbial activity may play a major role in the methylation process. An overall elevated concentration of Hg(T) in surface layers (0-4 cm) of the core is due to remobilization of mercury from deeper sediments. Based on the index of geoaccumulation (I (geo)) and low effects-range (ER-L) values, it is considered that the sediment is less polluted by Hg(T) and there is less ecotoxicological risk. The paper provides the first information of MeHg in sediments from this wetland environment and the authors strongly recommend further examination of Hg(T) fluxes for the development of a detailed coastal MeHg model. This could provide more refine estimates of a total flux into the water column.

Seasonal observations on water-quality parameters and chlorophyll-a in the coastal waters off Kalpakkam, southeast coast of India, was carried out covering an area of about 30 km(2) to find out the variations in physicochemical properties during a monsoonal cycle of the year. Most of the parameters exhibited a significant spatial and seasonal variation. It revealed that the coastal water was significantly influenced by freshwater input from the nearby backwaters during North-east monsoon and post-monsoon periods. A marginal increase in pH from coast towards offshore was noticed during the observation. Relatively low salinity values were observed during pre and post monsoon when compared to summer. Bottom water was found to be highly turbid during summer and pre-monsoon conditions when compared to surface. This could be attributed to the strong northerly wind and northward current prior to the onset of southwest monsoon. N, P and Si based nutrients are relatively high in their concentration in the bottom water. Nitrate was significantly high during post-monsoon and contributed greatly towards total nitrogen as evident from the statistical correlation. Ammonia concentration was relatively high in the bottom samples during all the seasons except on a few occasions during post-monsoon. In general, phosphate and total phosphorous values remained low and particularly so in the surface water. Higher silicate concentration was observed in the bottom water, and there was a reducing trend towards offshore. High chlorophyll-a values were observed during summer and surface water was found to have higher pigment concentrations as compared to the bottom. Results show that phosphate acts as the limiting factor for phytoplankton production particularly during post-monsoon period whereas; none of the nutrients were found to be limiting the phytoplankton growth during other seasons.

A significant variation in physicochemical properties of the Kalpakkam coastal waters, eastern part of India, was observed during the event of southwest to northeast monsoon transition. Increase in nitrate, total nitrogen, and silicate concentrations were noticed during post-transition period. Ammonia concentration was at peak during transition period as compared to pre- and post-transition periods. Hypo-saline condition (~23 psu) was observed during post-transition as the surface water salinity decreased by ~10 psu from the pre-transitional values. Turbidity, suspended particulate matter, phosphate and total phosphorous values decreased marginally, coinciding with northward to southward current reversal. A drastic decrease (eightfold) in chlorophyll-a concentration was observed in the coastal water during post-transition period.

A study pertaining to the seasonal variation in physicochemical properties of the coastal waters was carried out at Kalpakkam coast for a period of 1 year (February 2006 to January 2007). It revealed that the coastal water was significantly influenced by freshwater input during North East (NE) monsoon and post-monsoon periods. Concentration of all the nutrients and dissolved oxygen (DO) was relatively high during the NE monsoon, whereas, salinity and chlorophyll-a (chl-a) were at their minimum level during this period. Phytoplankton production peak was observed in summer during which a typical marine condition prevailed. The present observed values of nitrate, phosphate, silicate, and turbidity are significantly high (five to ten times) compared to that of the pre-Tsunami period from this coast. Relatively low DO and chl-a concentration was noticed during the post-Tsunami period. A notable feature of this study is that though nutrient concentration in the coastal waters during post-Tsunami period has increased significantly, turbidity, the most single dominating factor, was found to adversely affect the phytoplankton production during post-Tsunami period as reflected by relatively low chl-a concentration. Thus, the post-Tsunami period may result in a change in coastal biodiversity pattern concomitant with change in coastal water quality.

The paper presents the first comprehensive survey of congener profiles of polychlorinated biphenyls (PCBs) in core sediment samples (<63 microm particle size) covering seven sites in Sunderban mangrove Wetland, north-eastern part of the Bay of Bengal. Results pointed out a non-homogenous contamination of the wetland with Sigma23PCB values ranging from 0.5 to 26.9 ng g(-1) dry weight, reflecting very low to moderate contamination closely in conformity to other Asian coastal environment. The general decreasing order of the dominant congeners to the total load was: CB138 > 153 > 149 > 101, indicating the predominance of hexa-chlorinated congeners. The spatial distribution revealed significant differences in concentration related to local urbanization with industrial and land-based sources. No uniform temporal trend on PCB levels was recorded probably due to particular hydrological characteristics of the wetland and/or non-homogenous inputs from point sources. Strong positive correlations between the seven dominant congeners suggest their common sources and similar environmental behaviors. These results were also used for a risk assessment evaluation in the Sunderban wetland, showing that the present PCB levels were exceeding in few cases the lower limit of sediment quality guidelines of Environmental Protection Agency and Canadian Council of Ministers of the Environment.

This paper presents a comprehensive account regarding concentration, distribution and possible sources of trace elements (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn) in 20-30 cm sediment cores (<63 microm particle size) collected at the confluence of the Ganges River and Bay of Bengal (Sunderban wetland, India). This work aims to evaluate the fluvio-marine and geochemical processes influencing the metal distribution. The most interesting features are the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 10-15 cm observed in station Lot No.8 located along the main stream of the Ganges estuary as well as an overall elevated concentration of all the elements in the lower littoral zone. The interelemental relationship revealed the identical behaviour of elements during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of effluents originating from industrial and agricultural as well as from domestic sewage. Arsenic exceeded effects range - low (ER - L) concentrations, implying occasional or frequent adverse biological effects. For Cu, Ni and Cr a smaller proportion of samples had exceeded the ER - L values indicating that the dataset would be suitable for future use in evaluating predictive abilities of SQGs.