Search

Industrial processes and municipal wastes largely contribute to the fluctuations in iron (Fe) content in soils. Fe, when present in unfavorable amount, causes harmful effects on human, flora, and fauna. The present study is an attempt to evaluate the composition of Fe in surface soils from paper mill and municipal landfill sites and assess their potential ecological and human health risks. Geochemical fractionation was conducted to explore the chemical bonding of Fe across different fractions, i.e., water-soluble (F1) to residual (F6). Different contamination factors and pollution indices were evaluated to comprehend Fe contamination extent across the study area. Results indicated the preference for less mobile forms in the paper mill and landfill, with 26.66% and 43.46% of Fe associated with the Fe–Mn oxide bound fraction (F4), and 57.22% and 24.78% in the residual fraction (F6). Maximum mobility factor (MF) of 30.65% was observed in the paper mill, and 80.37% in the landfill. The enrichment factor (EF) varied within the range of 20 < EF < 40, signifying a high level of enrichment in the soil. The individual contamination factor (ICF) ranged from 0 to >6, highlighting low to high contamination. Adults were found to be more vulnerable towards Fe associated health risks compared to children. The Hazard Quotient (HQ) index showed the highest risk potential pathways as dermal contact > ingestion > inhalation. The study offers insights into potential Fe contamination risks in comparable environments, underscoring the crucial role of thorough soil assessments in shaping land use and waste management policies. [Display omitted] • Geochemical fractionation unveils less bioavailable Fe in contaminated soil. • EF, ICF, and I geo indicate high Fe contamination. • Adults are more susceptible to potential health risks from surplus Fe exposure. • HQ analysis pinpoints dermal contact as the primary pathway for Fe exposure risks. [ABSTRACT FROM AUTHOR]

Over time, the risk assessment of dermal exposure to pollutants in print paper products has received considerable attention. Most studies have focused on organic pollutants, especially bisphenol A (BPA). However, little is known about the levels of trace elements in print paper products, despite the knowledge that these elements are components of printing inks and toners. This study was aimed at determining the concentrations of trace elements in 5 types of paper products, namely bulletins, magazines, special events program booklets, handbills, and newspapers. The average daily intake (ADI) of each element was subsequently estimated through dermal exposure to the papers. The detection frequency of the elements of interest was high (nearly 100%) in most paper products, with the exception of chromium, whose detection was low. In contrast, Ag was not detected in any sample. The levels of the elements in the paper products were low and comparable to those found in other personal and consumer products with the potential for skin contact. The range values of estimated ADIs were 1.70–3.90E-08, 2.30–18.2E-10, 2.60–16.4E-09, 3.65–5.75E-08, 1.29–4.38E-08, 6.23–15.6E-10, 1.51–2.80E-10, 1.43–9.16E-09, 0.00–9.47E-09, and 4.68–220E-08 mg/kg bw/day for Mn, Co, Ni, Cu, Zn, As, Cd, Pb, Cr and Fe respectively. These values were well below the dermal standard reference doses (R f D) for each element. The present results indicate that dermal exposure to trace elements from print paper products was low and does not pose significant risks for toxic (non-carcinogenic) effects on humans. • Previous efforts have focused on the risk assessment of organic contaminants in print paper products. • Limited attention accorded to risk assessment of trace elements in print paper products • Human dermal exposure to trace elements via print paper products was low • Exposure to trace elements via print paper products has low risks of non-carcinogenic events. [ABSTRACT FROM AUTHOR]

Agro-based pulp and paper mills (PPMs) inevitably produce numerous refractory pollutants in their wastewater, including chlorolignin, chlorophenols, chlorocatechols, chloroguaiacol, cyanide, furan, dioxins, and other organic compounds, as well as various heavy metals, such as nickel (Ni), zinc (Zn), chromium (Cr), iron (Fe), lead (Pb), arsenic (As), etc. These pollutants pose significant threats to aquatic and terrestrial life due to their cytogenotoxicity, mutagenicity, impact on sexual organs, hormonal interference, endocrine disruption, and allergenic response. Consequently, it is crucial to reclaim pulp paper mill wastewater (PPMW) with high loads of refractory pollutants through effective and environmentally sustainable practices to minimize the presence of these chemicals and ensure environmental safety. However, there is currently no comprehensive published review providing up-to-date knowledge on the fate of refractory pollutants from PPMW in soil and aquatic environments, along with valuable insights into the associated health hazards and remediation methods. This critical review aims to shed light on the potential adverse effects of refractory pollutants from PPMW on natural ecosystems and living organisms. It explores existing effective treatment technologies for remediating these pollutants from wastewater, highlighting the advantages and disadvantages of each approach, all in pursuit of environmental safety. Special emphasis is placed on emerging technologies used to decontaminate wastewater discharged from PPMs, ensuring the preservation of the environment. Additionally, this review addresses the major challenges and proposes future research directions for the proper disposal of PPMW. It serves as a comprehensive source of knowledge on the environmental toxicity and risks associated with refractory pollutants in PPMW, making it a valuable reference for policymakers and researchers when selecting appropriate technologies for remediation. The scientific community, concerned with mitigating the widespread risks posed by refractory pollutants from PPMs, is expected to take a keen interest in this review. [Display omitted] [ABSTRACT FROM AUTHOR]

Three specific catalysts, namely ZIF-67 (zeolitic imidazolate framework-67), Co@NCF (Co@Nitrogen-Doped Carbon Framework), and 3D NCF (Three-Dimensional Nitrogen-Doped Carbon Framework), were prepared and studied for pulp and paper mill effluent degradation using heterogeneous activation of peroxymonosulfate (PMS). Numerous characterizations, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and N 2 adsorption, were used to characterize the properties of three different catalysts. 3D NCF is remarkably effective at heterogeneous activation of PMS to generate sulfate radicals to degrade pulp and paper mill effluent (PPME) compared to the other as-prepared catalysts. The catalytic activity reveals a sequence of 3D NCF > Co@NCF > ZIF-67.3D NCF could degrade organic pollutants in 30 min at an initial COD concentration of 1146 mg/L of PPME, 0.2 g/L catalysts, 2 g/L PMS, and 50 °C. Consequently, it was observed that the degradation of PPME using 3D NCF followed first-order kinetics, with an activation energy of 40.54 kJ mol−1. Overall, 3D NCF/PMS system reveals promising performance for PPME removal. • 3D NCF synthesized via calcining and etching a zeolitic imidazolate framework (ZIF-67). • 3D NCF presented the highest activity in the pulp and paper mill effluent degradation. • 3D NCF proved to be a promising catalyst and has superior stability. • Pulp and paper mill effluent degradation on 3D NCF followed pseudo-first-order kinetics. [ABSTRACT FROM AUTHOR]

Abstract Using waste paper as fuel for domestic heating is a beneficial recycling option for small island developing states where there are lacks of resources for energy and waste treatment. However, there are concerns about the impact of air pollutants emitted from the burning of the self-made paper briquettes as household air pollution is recognised as the greatest environmental risk for human. In this study, combustion tests were carried out for paper briquettes made in one Pacific island and three commercial fuels in Australia including wood briquettes, kindling firewood and coal briquettes in order to: 1) characterise the emissions of three criteria air pollutants including particulate matters, CO and NO x including their emission factors (EF) from the tested fuels; and 2) compare the EFs among the tested fuels and with others reported in the literature. The results showed that waste paper briquettes burned quickly and generated high temperature but the heat value is relatively low. Paper briquettes and coal briquettes produced higher CO concentration than the others while paper briquettes generated the highest NO x level. Only PM 2.5 concentration emitted from paper briquettes was similar to kindling firewood and lower than wood briquettes. Burning of paper briquettes and wood briquettes produced particulate matter with large average count median diameter (72 and 68 nm) than coal briquette and kindling firewood (45 and 51 nm). The EFs for CO, NO x and PM 2.5 of paper briquettes were within the range of EFs reported in this study as well as in the literature. Overall, the results suggested that using paper briquettes as fuel for domestic heating will not likely to generate higher level of three major air pollutants compared to other traditional fuels. Highlights • The first attempt to report emission of key air pollutants from waste paper briquettes. • Burning of paper briquettes emitted relatively high CO and NO x concentration. • Burning of paper briquettes emitted PM with large average particle size. • Waste paper could be recycled as briquettes for domestic use like other common fuels. [ABSTRACT FROM AUTHOR]

The heteroatoms and transition metal co-doped carbon-based catalysts are an important way to improve the catalytic activity of oxygen reduction reaction (ORR). Herein, we reported a facile method to obtain iron, nitrogen, and sulfur co-doped cellulose paper carbon fibers as catalysts (Fe–N–S/CFs) for ORR in microbial fuel cells (MFCs) with the adsorption recovery of Congo red molecules from dye wastewater. The thermal treatment promoted the etching of carbon surface by ferric ions, resulting in increased surface roughness for forming the defective carbon structure. The rich active species and defective carbon formed on the etched surface to enhance the electroactive surface area and effective sites. Fe–N–S/CFs catalysts achieved high half-wave potential due to the synergy effect between chemical components and defect structures. The assembled single-chamber air cathode MFC gained a high maximum power density of 1773 ± 40 mW m−2 versus Pt/C MFC of 1325 ± 94 mW m−2. This work provides a strategy for recovering dye molecules from wastewater to prepare non-precious metal catalysts for enhancing ORR activity. • Mg(OH) 2 @PF was employed to efficiently adsorb Congo red from the dye wastewater. • Congo red/Mg(OH) 2 @PF co-calcined with iron nitrate to fabricate Fe–N–S/FCs catalyst. • The Fe–N–S/CFs showed the excellent ORR performance with the active specie of FeN x. • The assembled air cathode MFCs achieved high maximum power density (1773 ± 40 mW m−2). [ABSTRACT FROM AUTHOR]

The primary source of soil pollution is a complex mixture of numerous inorganic and organic compounds (including chlorinated compounds, nutrients, and heavy metals, etc.). The presence of all of these compounds makes remediation and cleanup difficult. In this study, the phytoremediation ability of Jatropha curcas and Pongamia pinnata was tested to remove nickel (Ni) and Zinc (Zn) from paper mill and municipal landfill contaminated soils, to understand the uptake potential and to estimate the accumulation pattern of Ni and Zn in the vegetative parts of the plant. The experiments were carried out in pots (3 kg capacity) and the different combinations of soil were made by mixing the contaminated soil with a reference soil (forest soil) as T 0 , T 25 , T 50 , T 75 and T 100. The plant biomass, chlorophyll content, proline, nitrate reductase activity and metal removal efficiency (%)were determined after 120 DAS (i.e., the days after sowing). The results of the study showed that with increasing metal stress, there is a reduction in the above-ground biomass content in both the plant species with a slightly less impact on the root biomass. Over a period of 4 months, J. curcas and P. pinnata removed 82–86% and 93-90% Ni, respectively. The removal of Zn was significantly less as compared to Ni as most of the Zn remained in the belowground part (roots) and in the soil. Besides, the phytostabilization capacities of the plants were calculated on the basis of their tolerance index (TI), bioaccumulation factor (BAF) and translocation factor (TF). The low BAF and TF values with increasing heavy metals (HMs) content indicates its higher phytostabilization capacity in the root and rhizospheric region as compared to phytoaccumulation. [Display omitted] • J. curcas and P. pinnata removes 82 - 86 % and 93- 90 % Ni respectively. • High biomass and bioaccumulation factor (BAF) > 1: Suitable for metal phytoextraction. • Low biomass and BAF < 1: Suitable for metal phytostabilization. • Low translocation factor (< 1) indicated the phytostabilization capacity of the plants. [ABSTRACT FROM AUTHOR]

This study investigated the effectiveness of extended aeration system (EAS) and rice straw activated carbon-extended aeration system (RAC-EAS) in the treatment of pulp and paper biorefinery effluent (PPBE). RAC-EAS focused on the efficient utilization of lignocellulosic biomass waste (rice straw) as a biosorbent in the treatment process. The experiment was designed by response surface methodology (RSM) and conducted using a bioreactor that operated at 1–3 days hydraulic retention times (HRT) with PPBE concentrations at 20, 60 and 100%. The bioreactor was fed with real PPBE having initial ammonia-N and total phosphorus (TP) concentrations that varied between 11.74 and 59.02 mg/L and 31–161 mg/L, respectively. Findings from the optimized approach by RSM indicated 84.51% and 91.71% ammonia-N and 77.62% and 84.64% total phosphorus reduction in concentration for EAS and RAC-EAS, respectively, with high nitrification rate observed in both bioreactors. Kinetic model optimization indicated that modified stover models was the best suited and were statistically significant (R2 ≥ 0.98) in the analysis of substrate removal rates for ammonia-N and total phosphorus. Maximum nutrients elimination was attained at 60% PPBE and 48 h HRT. Therefore, the model can be utilized in the design and optimization of EAS and RAC-EAS systems and consequently in the prediction of bioreactor behavior. [ABSTRACT FROM AUTHOR]

Accompanying China's accession to the World Trade Organization, the rapid development of the Chinese economy has led to increasingly serious environmental issues. However, the inherent mechanisms underlying the impact of Environmental Information Disclosure (EID) policy and trade on the environmental effects of Chinese paper enterprises remain unclear in the context of the era's requirement for a resource-conserving and environmentally-friendly society. The pollution problem in the papermaking industry has received attention worldwide, and how to balance the environmental and development issues of papermaking enterprises is an urgent issue that needs to be solved in the academic community. This study explores the impact mechanisms of EID policy and trade on the environmental effects of enterprises from the perspective of financial constraints. Utilizing the PSM-DID model, the study investigates the moderating effects of financial constraints on the EID policy and import-export trade. The findings reveal that both external and internal financial constraints have negative, detrimental effects on the environmental effects of the EID policy and trade. These constraints impede research and development investment and technological upgrades, hinder productivity improvement, and hamper the realization of "regulatory and trade innovation effects". This study enriches our understanding of the mechanisms by which trade affects the environmental effects of Chinese paper enterprises and further identifies the impacts of Chinese EID policy and trade on pollution emissions by enterprises, providing a theoretical basis and practical foundation for the government in formulating financial, environmental, and trade policies. • Analyzing the environmental effects of Chinese paper enterprises from the perspective of financing constraints. • This study validated the research hypothesis using three micro databases. • This study decomposes the impact mechanism into three aspects: scale effects, technical effects, and structural effects. [ABSTRACT FROM AUTHOR]

The JK Paper industry located at Rayagada discharges biologically untreated effluent more than the permissible limit prescribed by Pollution Control Board, Odisha in to the environment. The industry is seriously polluting the surrounding aquatic and terrestrial environment. No detailed intensive study was carried out by previous workers on this industry earlier. The present study aims at finding out the impact of effluent on the flora at the contaminated site. The chemically treated effluent (TE) contained significant amount of mercury and cadmium. The TE has high BOD, COD, dissolved solids and suspended solids when compared to normal river water at the site of discharge. The TE deteriorated the natural water bodies changing the physico-chemical properties of natural river water. After meeting the river water the TE was diluted after 1 km distance from the meeting point of the river. Crop plants collected from the contaminated site showed higher level of residual Hg and Cd and significant depletion in pigment was observed. Plants collected from both the sides of the treated effluent canal showed significant amount residue mercury and cadmium in the plant leaves. The plants exposed to the TE, showed variation in chlorophyll and Phaeophytin pigment content when compared to their respective control values in all terrestrial plants collected from the contaminated site. In some plant leaves little increment in the pigment level was noted but the values were not significant. The changes observed in the plant pigment might be due to heavy metal accumulation. The presence of residual Hg and Cd in crop plants and plant leaves grazed by grazing animals after absorption, accumulation and enrichment may lead to a possible biological magnification, warrants attention. Proper biological treatment, treatment of effluent by modern methods and removal of heavy metals from the effluent before discharge by the industry is suggested. • Biological treatment of the effluent was not carried out by the industry & chemicals present in the effluent were significantly high.. • The water quality of the river water deteriorated due to the discharge of effluent of the paper mill. • Plants collected from the contaminated site showed significant accumulation of cadmium and mercury in leaf tissues • Significant depletion in pigment content of exposed plant leaves was noticed. • Depletion in plant pigment was due to accumulation of cadmium and mercury in plant tissues absorbed from the effluent. [ABSTRACT FROM AUTHOR]

Abstract: Using data from the North Carolina School Asthma Survey about the respiratory health of 64,432 adolescents attending public schools in North Carolina and data provided by school employees about the environmental health conditions of the school buildings, we assessed the prevalence of daytime wheezing during the past year among students estimated to be exposed to air pollutants arising from pulp and paper mills located near the schools. Of the schools the students attended, 14% (37/266) were located within 30 miles of one or more pulp and paper mills and odor from the mills was identified by survey respondents for 9 of the 266 schools. The prevalences of daytime wheezing in smokers and nonsmokers with household cigarette smoke exposure were elevated among students attending schools located within 30 miles of a pulp and paper mill, compared to the prevalence among students attending schools located beyond 30 miles (⩽10 miles, prevalence ratio (PR): 1.21, 95% confidence interval (95% CI): 0.99, 1.43; 10–⩽30 miles, PR: 1.06, 95% CI: 0.96, 1.16) and among students attending schools with noticeable odor from a pulp and paper mill (PR: 1.12, 95% CI: 0.93, 1.31). These results indicate a possible association between paper mill location and wheezing symptoms among adolescents and suggest that community-based exposure to pulp and paper mill emissions may have a greater impact on smokers and individuals exposed to cigarette smoke in the home than on nonsmokers without such household exposure. [Copyright &y& Elsevier]

The research assessed waste-based briquettes consumption compared to conventional fuels in the Andes. Laboratory tests were conducted together with on-field analysis in Colquencha (Bolivia). The laboratory study shows that the performances of briquettes are better in terms of PM2.5 (933.4 ± 50.8 mg kg−1) and CO emissions (22.89 ± 2.40 g kg−1) compared to animal dung (6265.7 ± 1273.5 mgPM2.5 kg−1 and 48.10 ± 12.50 gCO kg−1), although the boiling time increased due to the lower fuel consumption rate and firepower compared to shrubs. The social survey organized with 150 Bolivian citizens suggested that low-income households are not able to pay for an alternative fuel: about 40% would pay less than 4 USD per month, while methane use for cooking is positively correlated with the income level (r = 0.244, p < 0.05). On field analysis suggested that local cookstoves are not appropriate for briquettes combustion since indoor air pollution overcomes 30 ppm of CO and 10 mgPM2.5 m-3. On balance, local small manufactures can be the main target for selling waste-based briquettes to reduce shrubs and wood consumption. However, briquettes production costs seem not yet competitive to natural easy-to-obtain fuels (i.e., animal dung). The research encourages the use of cellulosic and biomass waste-based briquettes in the Andean area for cooking, heating, or manufacturing and strongly advises policy-makers to introduce economic incentives for the recovery of secondary raw materials. • Analysis of waste-based briquettes use in Andean areas were conducted. • Laboratory analysis, social surveys, and on field evaluations are the methods. • Briquettes can be employed for reducing about 30% of the conventional fuels. • The research encourages the employment of waste-based briquettes in the Andes. • Incentives to briquettes production and consumption should be introduced. [ABSTRACT FROM AUTHOR]

Novel Carbon quantum dots-graphite composite ink-based Screen-printed electrodes (CQDs/SPEs) were used to assemble a highly sensitive electrochemical aptasensor against chlorpyrifos (CPF). The aptasensor showed a broad linear range from 1 pM (0.445 ng/ml) to 500 nM (0.22 mg/ml) with a detection limit (LOD) 0.834 pM (0.37 ng/ml); sensitivity 21.39 μA pM−1 cm− 2 and with good linearity of R2 = 0.973. Moreover, the aptasensor's showed better selectivity among few other pesticides. Further, the aptasensor electrode showed high stability for five months when stored at 4 °C. In the final step, the aptasensor's ability to identify CPF in real samples was evaluated on spiked potato (Solanum tuberosum) extract samples. Potato extract spiked with CPF in the electrochemical aptasensing platform showed excellent linearity of R2 = 0.981. The developed aptasensor showed good response to without spiked potato extract with increasing volumes. Hence, the developed aptasensor demonstrated reasonable applicability in real food and agriculture samples. • Chlorpyrifos (CPF), an organophosphate pesticide, is known for detrimental effects on environment raising global health concern. • Electrochemical based disposable screen printed aptasensor is developed for the detection of chlorpyrifos pesticide. • The CQDs/SPE aptasensor was fabricated using carbon quantum dots (CQDs) through drop cast method. • The aptasensor exhibited a wide linear range (1 pM-500 nM) with LOD (0.834 pM) and high sensitivity (21.39 μA pM−1 cm− 2). [ABSTRACT FROM AUTHOR]

Abstract Bisphenol A (BPA) is a high-production-volume chemical with endocrine disrupting properties commonly used as color developer in thermal paper. Concerns about the potential hazards of human BPA exposure have led to the increasing utilization of alternatives such as bisphenol S (BPS) and bisphenol F (BPF). This study was designed to assess: (i) BPA, BPS, and BPF concentrations in 112 thermal paper receipts from Brazil, France, and Spain by liquid chromatography coupled to mass spectrometry (LC-MS); and (ii) hormone-like activities of these receipts using two receptor-specific bioassays, the E-Screen for (anti-)estrogenicity and PALM luciferase assay for (anti-)androgenicity. BPA was present in 95.3% of receipts from Spain, 90.9% of those from Brazil, and 51.1% of those from France at concentrations up to 20.27 mg/g of paper. Only two samples from Brazil, two from Spain, and ten from France had a BPS concentration ranging from 6.46 to 13.29 mg/g; no BPA or BPS was detected in 27.7% of French samples. No BPF was detected in any receipt. Estrogenic activity was observed in all samples from Brazil and Spain and in 74.5% of those from France. Anti-androgenic activity was observed in > 90% of samples from Brazil and Spain and in 53.2% of those from France. Only 25.5% of French samples were negative for both estrogenic and anti-androgenic activity. Estrogenic and anti-androgenic activities per gram of paper were up to 1.411 µM estradiol (E 2) equivalent units (E 2 eq) and up to 359.5 mM procymidone equivalent units (Proceq), respectively. BPA but not BPS concentrations were positively correlated with both estrogenic and anti-androgenic activities. BPA still dominates the thermal paper market in Brazil and Spain, and BPS appears to be one of the main alternatives in France. There is an urgent need to evaluate the safety of alternatives proposed to replace BPA as developer in thermal printing. The large proportion of samples with hormonal activity calls for the adoption of preventive measures. Highlights • BPA or BPS but not BPF was present in nearly all thermal paper receipts. • Hormone-like activity was detected in > 80% of the receipts. • BPA levels were 30- to 100-fold higher than the EU-recommended level (0.2 mg/g). • BPS only appears to be an alternative to BPA in thermal paper from France. [ABSTRACT FROM AUTHOR]

Abstract Environmental pollution due to various elements is increasing all across the planet owing to their use in industrial processes. The tobacco plants and the vegetables used in the manufacturing of smoking paper may accumulate these elements from the environment. Thus, tobacco and smoking paper may be relevant contributors among the content of elements in cigarettes, including some emerging pollutants such as rare earth elements (REEs). Thirty-two elements related to hi-tech industrial processes were analyzed in tobacco, rolling paper, and filters (n = 257 samples) by ICP-MS. A variety of industrial brands and "roll-your-own" cigarette papers were considered. The potential maximum daily exposure to these elements by a hypothetical heavy smoker was calculated for each type of cigarette. We found significant differences in the levels of most elements, both in the tobacco and in the paper. Black tobacco cigarettes contained the maximum levels. We found that the paper used in roll-your-own cigarettes may significantly modify their concentration of elements. Fast-burning, bleached, and flavored papers also contribute to higher levels of these pollutants. Thus, the differences in theoretical exposure depending on the type of cigarette consumed–either branded or hand-rolled–may be very striking, of up to 35–40 times. In addition to the number of cigarettes consumed per day, it is necessary to consider the type of cigarette consumed to assess the risk of exposure to toxic elements. Tobacco paper is a prominent source of exposure to toxic elements. Cigarette smoke is another source of exposure to emerging contaminants such as REE. Highlights • The type of cigarettes consumed influences the exposure to toxic elements. • Black tobacco cigarettes contain the highest concentrations of toxic elements. • The rolling paper may be a major contributor to the concentration of toxic elements released. • Cigarette consumption represents an additional source of exposure to rare earth elements. [ABSTRACT FROM AUTHOR]

Review papers help researchers understand the direction and flow of research and help beginners quickly acquire relevant knowledge. Therefore, the review paper should describe only accurate contents and should be written with only core and important matters. Recently, Othmani et al. (2022) reviewed more than 200 papers related to the adsorptive removal of three harmful pollutants: toxic organics (phenols), anionic heavy metal (Cr(VI)) and cationic heavy metal (Cd(II)) by agricultural waste materials. However, Cr(VI)-related section of this review is missing something important that should be provided to the readers of this journal. In fact, the removal mechanism of Cr(VI) by nonliving biomass including agricultural waste materials under acidic conditions is not a simple anion adsorption but a complex mechanism involving redox reaction called "adsorption-coupled reduction". Therefore, when interpreting the factors affecting Cr(VI) removal, it should be interpreted in terms of the redox reaction concept, not anion adsorption. • Reduction of Cr(VI) to Cr(III) by agricultural waste materials. • Complex mechanism called "adsorption-coupled reduction". • Interpretation of experimental data with reduction reaction concept. [ABSTRACT FROM AUTHOR]

Biovalorization of pulp and paper activated sludge to value-added products could be an effective alternative to traditional sludge management methods, which tend to pose serious environmental issues. Since pulp and paper activated sludge consists of microbial biomass, cellulose, hemicellulose and lignin and thus, could be subjected to different hydrolysis methods to solubilize sludge solids and release simple sugars to form value-added products by the microbial fermentation process. Hence, different sludge hydrolysis methods have been summarized in this review paper. However, hydrolysis of lignocellulosic materials generates variety of toxic compounds during hydrolysis and causes detrimental effects. Therefore, different toxic compounds and their impact on microorganisms, cellulolytic enzymes and fermentation process have been discussed in detail and recent strategies to counteract the problems of inhibitors have also been briefly explained. 1 Biovalorization of pretreated pulp and paper sludge to value added products. 2 Toxic compounds released during sludge hydrolysis affects microbial fermentation. 3 The concentration of toxic compounds depends upon pretreatment strategy. 4 Economical and industrially feasible detoxification strategy is necessary. [ABSTRACT FROM AUTHOR]

The current study analyzed the high heating values (HHVs) of various waste biomass materials intending to the effective management and more sustainable consumption of waste as clean energy source. Various biomass waste samples including date leaves, date branches, coconut leaves, grass, cooked macaroni, salad, fruit and vegetable peels, vegetable scraps, cooked food waste, paper waste, tea waste, and cardboard were characterized for proximate analysis. The results revealed that all the waste biomass were rich in organic matter (OM). The total OM for all waste biomass ranged from 79.39% to 98.17%. Likewise, the results showed that all the waste biomass resulted in lower ash content and high fixed carbon content associated with high fuel quality. Based on proximate analysis, various empirical equations (HHV=28.296-0.2887(A)-656.2/VM, HHV=18.297-0.4128(A)+35.8/FC and HHV=22.3418-0.1136(FC)-0.3983(A)) have been tested to predict HHVs. It was observed that the heterogeneous nature of various biomass waste considerably affects the HHVs and hence has different fuel characteristics. Similarly, the HHVs of waste biomass were also determined experimentally using the bomb calorimeter, and it was observed that among all the selected waste biomass, the highest HHVs (21.19 MJ kg−1) resulted in cooked food waste followed by cooked macaroni (20.25 MJ kg−1). The comparison revealed that experimental HHVs for the selected waste biomass were slightly deviated from the predicted HHVs. Based on HHVs, various thermochemical and biochemical technologies were critically overviewed to assess the suitability of waste biomass to energy products. It has been emphasized that valorizing waste-to-energy technologies provides the dual benefits of sustainable management and production of cleaner energy to reduce fossil fuels dependency. However, the key bottleneck in commercializing waste-to-energy systems requires proper waste collection, sorting, and continuous feedstock supply. Moreover, related stakeholders should be involved in designing and executing the decision-making process to facilitate the global recognition of waste biorefinery concept. [Display omitted] • The high heating values (HHVs) of biomass waste were assessed with the aim for the sustainable consumption of waste as a source of clean energy. • All the biomass waste were rich in organic matter and fixed carbon content that ranged from 79.39% to 98.17% and 50.64%–54.26% respectively. • The maximum HHVs (21.19 MJkg−1) were recorded for cooked food waste. • The heterogeneous nature of various biomass waste considerably affects the HHVs and hence serve as suitable feedstock for various energy conversion technologies. [ABSTRACT FROM AUTHOR]

The paper microzones method (PMZs) is a green chemical method that uses the principle of the three primary colors of red, green and blue (RGB) to detect the water quality of the droplets on white paper. However, this method is rarely used in the performance evaluation of photocatalysts. The paper details the first use of paper microzones utilized in the evaluation of photocatalyst performance. A sol-gel method was used to prepare molecularly imprinted modified TiO 2 photocatalysts for the treatment of different wastewaters, and characterized the catalysts using XRD and several other methods. The reliability of PMZs on the evaluation of photocatalytic activity and selectivity was also analyzed. The following results were obtained: EP-TiO 2 catalysts (EP, ethyl paraben, the imprinting molecule) with different S doping levels were synthesized using a one-step sol-gel method, and the best S doping ratio was found to be n(Ti):n(S) 3:1. S-EP-TiO 2 was found to be 100% anatase and showed excellent photocatalytic performance, while the PMZs method accurately determined changes in RGB levels for the photocatalytic degradation process of pollutants using S-EP-TiO 2 as the photocatalyst. A photocatalytic kinetic analysis showed the PMZs method was quite suitable for the evaluation of photocatalyst activity, but the evaluation of selectivity needs improvement. This method is a promising green chemistry way to evaluate photocatalyst performance and the rapid detection of outdoor sewage water quality. [Display omitted] • Innovative application of Paper microzones in the evaluation of photocatalytic performance. • Paper microzones method is compared with the traditional spectroscopic method. • Simple operation and green chemistry for environmental research. [ABSTRACT FROM AUTHOR]

To ensure safe drinking water, it is necessary to have a simple method by which the probable pollutants are detected at the point of distribution. Nitrite contamination in water near agricultural locations could be an environmental concern due to its deleterious effects on the human population. The development of a frugal paper-based microfluidic sensor could be desirable to achieve the societal objective of providing safe drinking water. This work describes the development of a facile and cost-effective microfluidic paper-based sensor for quantitative estimation of nitrite in aquatic environments. A simple punching machine was used for fabrication and rapid prototyping of paper-based sensors without the need of any specialized equipment or patterning techniques. A reusable 3D printed platform served as the support for simultaneous testing of multiple samples. The nitrite estimation was carried out with smartphone-assisted digital image acquisition and colorimetric analysis. Under optimized experimental conditions, the variation in average grayscale intensity with concentration of nitrite was linear in the range from 0.1 to 10 ppm. The limits of detection and quantitation were 0.12 ppm and 0.35 ppm respectively. The reproducibility, expressed as relative standard deviation was 1.31%. The selectivity of nitrite detection method was determined by performing interference studies with commonly existing co-ions in water, such as bicarbonates, chloride and sulphate. The paper-based sensor was successfully applied for estimation of nitrite in actual water samples and showed high recoveries in the range of 83.5–109%. The results were in good agreement with those obtained using spectrophotometry. The developed paper-based sensor method, by virtue of its simplicity, ease of fabrication and use, could be readily extended for detection of multiple analytes in resource-limited settings. [ABSTRACT FROM AUTHOR]

Paper–TiO 2 –Ag 2 O floating photocatalysts were produced under mild condition and their photocatalytic activity for the degradation of aromatic amine under sunlight stimulant was investigated. Characterizations by Raman, XRD, XPS, DRS and PL confirmed the presence of TiO 2 and Ag 2 O, and the morphology of the appended TiO 2 /Ag 2 O layer was probed by FE-SEM. The photocatalytic activity of the prepared samples was investigated by the degradation of aniline (AN) in water under simulated sun-light illumination and constrained conditions, i.e. non-stirring and non-oxygenation. The presence of Ag 2 O combined with TiO 2 was shown to improve the resistance of paper to bacteria attack, thus increasing the durability of the photocatalyst. Thanks to its hydrophobic character, the paper–TiO 2 –Ag 2 O NPs can be employed as useful floating photocatalyst and can be reused in continuous cycles. • Paper–TiO 2 decorated with Ag 2 O nanoparticles was prepared by a facile method. •Generation of TiO 2 anatase and Ag 2 O phases was confirmed by XRD, Raman and XPS. •Paper–TiO 2 –Ag 2 O exhibits excellent photodegradation activity toward of aniline. •Paper–TiO 2 –Ag 2 O displays good antibacterial activity against E. Coli under sunlight. [ABSTRACT FROM AUTHOR]

Mold deterioration of historical documents in archives and libraries is a frequent and complex phenomenon that may have important economic and cultural consequences. In addition, exposure to toxic fungal metabolites might produce health problems. In this work, samples of broths of fungal species isolated from the documentary material and from indoor environmental samples of the Archive of Bogotá have been analyzed to investigate the presence of mycotoxins. High resolution mass spectrometry made possible to search for a large number of mycotoxins, even without reference standards available at the laboratory. For this purpose, a screening strategy based on ultra-high pressure liquid chromatography coupled to quadrupole-time of flight mass spectrometry (UHPLC–QTOF MS) under MS E mode was applied. A customized home-made database containing elemental composition for around 600 mycotoxins was compiled. The presence of the (de)protonated molecule measured at its accurate mass was evaluated in the samples. When a peak was detected, collision induced dissociation fragments and characteristic isotopic ions were also evaluated and used for tentative identification, based on structure compatibility and comparison with literature data (if existing). Up to 44 mycotoxins were tentatively identified by UHPLC–QTOF MS. 34 of these tentative compounds were confirmed by subsequent analysis using a targeted LC–MS/MS method, supporting the strong potential of QTOF MS for identification/elucidation purposes. The presence of mycotoxins in these samples might help to reinforce safety measures for researchers and staff who work on reception, restoration and conservation of archival material, not only at the Archive of Bogotá but worldwide. [ABSTRACT FROM AUTHOR]

Titanium dioxide nanoparticles (TiO 2 NPs) are becoming more and more renowned as biocompatible nanomaterials with diverse biological functions. In the present study, the aqueous extract of tea residue (tea filtered waste powder) was used to synthesize the TiO 2 NPs and treated for effluent bioremediations. Maximum absorption in the UV–Vis spectrum of the TiO 2 NPs was seen at 358 nm, and the XRD pattern reveals peaks at 2 h values of 25.78, 38.24, 47.98, 54.76, 55.32, 62.64, 69.05, 70.15, 75.24, and 83.59 that may be indexed to the (101), (004), (200), (105), (211), (204), (116), (220), (215) and (303). The FT-IR spectra of TiO 2 NPs showed a peak at 3420, 2925, 1621, 1382, 1098, and 687 cm-1. The spherical form and size were disclosed by FE-SEM analyses, and the EDAX pattern verified the purity of the TiO 2 NPs. The average particles size of the TiO 2 NPs was 32 nm. The photodegradation of paper mill waste water is significantly deteriorated up to 99.08% for 600 min, but textile waste water is degraded up to 98.06% for the same duration. Furthermore, we reported that TiO 2 NPs may rapidly breakdown industrially hazardous effluents when exposed to sunshine. Overall, this new, straightforward, and environmentally beneficial strategy may be of interest to the management of efficient degradation of dye solutions in the polluted regions. • Biofabricated of TiO 2 NPs is using Tea residue for the first time. • Biofabricated TiO 2 NPs have Crystalline, Uniform, Spherical and monodispersed nanoparticles. The average size of the particle are 24 nm. • The biofabricated TiO 2 NPs have shown excellent photocatalytic applications. [ABSTRACT FROM AUTHOR]

The presence of lignin along with other pollutants makes effluent more complex when it is discharged from Pulp and paper mills. The present study investigates the use of biofilm-forming bacteria isolated from pulp paper mill effluent contaminated sites (PPMECSs) for lignin degradation. Isolated biofilm-forming and lignin-degrading bacteria were identified as Bacillus subtilis , Enterobacter cancerogenus, and Bacillus licheniformis by 16S rRNA gene sequencing. Thin liquid chromatography (TLC) analysis showed that the consortium of bacteria produced acyl-homoserine lactone (AHL) as quorum sensing molecules and extracellular polymeric substances (EPS) that protect the bacterial consortium under unfavorable conditions. The potential consortium was able to reduce lignin (900 ppm) by 73% after 8 days of incubation in a minimal salt medium containing kraft lignin and glucose at pH 7.0 and 37 °C as compared to individual strains. The degradation by-products were identified as amides, alcohols, and acids. The major organic pollutants in the effluent were reduced after treatment of the constructed consortium, thus confirming active biotransformation and biodegradation of the lignin. Microscopic examination also indicated the presence of lignin induced biofilm formation. Hence, the constructed biofilm-forming bacterial consortia based on quorum sensing offered a sustainable and effective solution to treat lignin-containing complex pollutants. • Quorum sensing (QS) induced biofilm formation. • Biofilm formation was maximum by bacterial consortium. • Lignin (900 ppm) reduction was maximum 73% by consortium. • Treatment of lignin by QS based biofilm lead an effective approach to treat effluent. [ABSTRACT FROM AUTHOR]

Both the environment and human health have suffered as a result of excessive and irrational pesticide use. The human body is vulnerable to a wide range of illnesses brought on by prolonged exposure to or intake of food contaminated with pesticide residues, including immunological and hormonal abnormalities and the development of certain tumors. Sensors based on nanoparticles stand out from more conventional spectrophotometry analytical methods due to their low detection limits, high sensitivity, and ease of use; that is why the demand for simple, fast, and less expensive sensing methods increases daily and presents myriad uses. Such demands are fulfilled by employing paper-based analytical devices having intrinsic properties. The presented work reports an on-site, easy-to-handle, and disposable paper-based sensing device for performing fast screening along with readout from a smartphone. The fabricated device utilizes luminescent silica quantum dots, immobilized into a paper cellulose matrix, and the resonance energy transfer phenomenon is employed. The silica quantum dots probes were fabricated from citric acid and, by undergoing physical adsorption, were confined on the nitrocellulose substrate in small wax-traced spots. The silica quantum dots were excited by smartphone ultraviolet LED, acting as an energy source and for capturing the image. The obtained LOD is 0.054 μM, and the coefficient of variation is less than 6.1%, comparable to the result obtained by UV–Visible and fluorometric analysis under similar experimental conditions. In addition, high reproducibility (≥9.8%) and high recovery ≥90% were obtained in spiked blood samples. The fabricated sensor sensitively detected pesticides giving a LOD of 2.5 ppm along with the development of yellow color within a short period of 5 min. The sensor functions well when sophisticated instrumentation is not accessible. The presented work shows the potential of the paper strip for the on-site detection of pesticides in biological and environmental samples. • The easy-to-handle, less expensive and disposable paper-based sensing device for the rapid on-site detection of pesticides is fabricated. • The luminescent silica quantum dots were immobilized in detection zones fabricated on paper for detection. • High reproducibility (≥9.8%) and high recovery ≥90% were obtained in real samples containing chlorpyrifos, lambda, and bifenthrine. • The fabricated nanosensors sensitively detected pesticides giving a LOD of 2.5 ppm. • The present method is an effective approach for analytical applications. [ABSTRACT FROM AUTHOR]

Household garbage rooms release abundant bioaerosols and are an important source of pathogens; however, information on the distribution and survival patterns of pathogens in different waste components is limited. In this study, a culture method and 16S rRNA high-throughput sequencing were used to determine bacterial communities, culturable pathogens, and human bacterial pathogens (HBPs). The results showed that abundant culturable bacteria were detected in all waste types, and a large number of S. aureus was detected on the surface of recyclable wastes, whereas S. aureus , total coliforms, Salmonella , Enterococcus , and hemolytic bacteria were detected in food waste and other waste. The activities of these detected pathogenic bacteria decreased after 24 h of storage but re-activated within one week. Factors affecting the emergence of pathogens varied with different waste components. Sequencing results showed that Pseudomonas , Acinetobacter, and Burkholderia were abundant in the waste samples, whereas Achromobacter , Exiguobacteriums, Bordetella , and Corynebacterium were the primary pathogens in the bioaerosol and wall attachment. The results of traceability analysis showed that bioaerosol microbes were mainly derived from raw kitchen waste (5.98%) and plastic and paper contaminated with food waste (19.93%) in garbage rooms. In addition, bioaerosols were the main source of microflora in the wall attachment, which possessed high HBP diversity and required more attention. These findings will help in understanding the microbial hazards in different waste components and provide guidance for the control and risk reduction of bioaerosols during waste management and recycling. [Display omitted] • Abundant Staphylococcus aureus were detected on the surface of recyclable wastes. • Diverse pathogenic bacteria were detected in food wastes and other wastes. • The activities of pathogens decreased after 24 h but re-activated within one week. • Abundant and diverse human bacterial pathogens were detected in the wall attachment. • Raw kitchen waste and contaminated plastic and paper were main sources of bioaerosol. [ABSTRACT FROM AUTHOR]

Environmental monitoring of mercury (Hg2+) ions has become increasingly important as a result of their detrimental effects on biological organisms at all levels. To recognize toxic metal ions, utmost effort has been devoted to developing new materials that are highly selective, ultra-sensitive, and provide rapid response. In this context, a new chemosensor, 2-imino [N - (N-amido phenyl)]-6-methoxy-3-carbethoxy quinoline (L), has been synthesized by combining 2-formyl-6-methoxy-3-carbethoxy quinoline and benzhydrazide and it has been extensively characterized by NMR, FTIR, ESI-Mass and SCXRD analysis. Probe L has excellent specificity and sensitivity toward Hg2+ ions in semi-aqueous solutions, with a detection limit of 0.185 μM, regardless of the presence of other interfering cations. Chromogenic behavior was demonstrated by the L when it changed the color of the solution from colorless to light yellow, a change that can be observed visually. The probe L forms a 1:1 stochiometric complex with an estimated association constant (K a) of 6.74 × 104 M−1. The 1H NMR change and density functional theory calculations were analyzed to improve our understanding of the sensing mechanism. Also, an inexpensive and simple paper-based test kit has been developed for the on-site detection of mercury ions in water samples. • Quinoline Schiff base probe (L) was designed and synthesized as a colorimetry sensor for Hg2+ ions. • Probe L showed highly selective towards Hg2+ ions with a LOD of 0.185 μM. • Probe L forms a 1:1 stochiometric complex with a binding constant of 6.74 × 104 M−1. • The paper-based test kit has been developed for detecting mercury ions. [ABSTRACT FROM AUTHOR]

Chlorinated paraffins (CPs) are hazardous to humans, and dietary intake acts as the primary pathway for human exposure to CPs. Takeout food is popular worldwide, but the presence of CPs in takeout food and its packaging is unclear. In this study, the concentrations and distributions of short- and median-chain CPs (SCCPs and MCCPs, respectively) were measured in 97 samples of four categories of takeout food and 33 samples of three types of takeout packaging. The SCCP and MCCP median concentrations for the takeout food samples were 248 and 339, 77.2 and 98.2, 118 and 258, 42.9 and 64.4 ng/g wet weight in meat, starch, half meat/half starch, and vegetables, respectively. Takeout food contained higher concentrations of SCCPs than MCCPs. The dominant SCCP and MCCP congener groups in takeout food were C 10 Cl 6–7 and C 14 Cl 7–8 , respectively. The CP concentrations in takeout food were lower than those in packaging. The SCCP and MCCP median concentrations, respectively, in packaging were 9750 and 245 ng/g in polypropylene, 2830 and 135 ng/g in paper, and 2060 and 119 ng/g in aluminum foil. The concentrations of SCCPs and MCCPs were comparable in aluminum foil, whereas the concentrations of SCCPs were higher than those of MCCPs in polypropylene and paper. Correlations between CP concentrations in the takeout food and packaging indicated that CPs in packaging were potentially an important source of CPs in the takeout food. A dietary exposure risk assessment showed the takeout food posed a low risk for human exposure to CPs; however, high-frequency consumption may pose a health risk. This study clarified the current contamination situation in takeout food in Beijing, China. The resulting data could be used to prevent human exposure to CPs through dietary intake and to facilitate the market's control over the quality of takeout food. • Chlorinated paraffin (CP) concentrations are highest in animal-origin takeout food. • CP concentrations are highest in polypropylene and lowest in aluminum foil. • Shorter carbon chain and lower chlorination CPs are dominant in food and packaging. • CPs in packaging are a potential source for CPs in takeout food. • The human exposure risk to CPs through takeout food intake is low. [ABSTRACT FROM AUTHOR]

Environmental pollution is a growing concern, particularly the impact of sewage treatment gas on the atmosphere's greenhouse effect. Efficient sewage resource recycling is crucial to achieving carbon neutrality. The bacteria-algae symbiotic sewage treatment system combines wastewater treatment, carbon dioxide fixation, and biomass energy recovery to achieve the goal of carbon neutrality, environmental protection, and the transformation of high-value added products. This paper presents the construction of a sequencing batch photobiological reaction system that utilizes a microbial-algae symbiotic relationship. The system was used to analyze the degradation effects of sCOD, TN, AN, and TP in anaerobic digestion wastewater by varying the microbial-algae ratios. Additionally, changes in the microbial community were analyzed to explore the system's potential for reducing carbon emissions. The study's findings indicate that: 1)When the ratio of bacteria to algae was 2:3, the removal rates of TN, AN, sCOD, and TP were 81.38%, 94.28%, 75.33%, and 96.56%. 2)Changing the ratio of bacteria to algae would affect the bacterial concentration in the mixed system, but not the bacterial community structure. The results indicate that a ratio of 2:3 enhances the removal of pollutants by bacteria and algae symbionts.3) Under the context of carbon neutralization, this paper investigates the reduction of carbon emissions in ADE treated by bacteria-algae symbiosis at the optimal bacteria to algae ratio. The experimental process can reduce 177.03 mg CO 2 compared to complete nutrient consumption treatment, which is equivalent to a reduction of 355.08 g CO 2 per 1 m3 of ADE. For full anaerobic treatment, this experimental process can reduce 228.35 mg of CO 2 equivalent CH 4 , which translates to a reduction of 456.71 g of CO 2 equivalent CH 4 per 1 m3 of ADE. • Optimize the symbiotic system of bacteria and algae in anaerobic digestion wastewater treatment. • Determine the best ratio of bacteria to algae. • Low carbon emissions during the symbiotic treatment of bacteria and algae. [ABSTRACT FROM AUTHOR]

Although studies dealing with adsorption/desorption (and/or retention/release) of pollutants present in environmental compartments is a classical field of research, recent papers are focusing on some weak points of investigations and publications within the area. In addition, an increasing number of works are being published related to new possibilities and alternatives in this kind of research works, many of them in relation to the use of artificial intelligence (AI). Considering the existence of eventual controversies, eventual mistakes, and the convenience of suggesting alternatives to go ahead in the future, in this work, after taking into account some relevant publications in the previous literature, a simple workflow is proposed as a kind of protocol to revise successive steps that could guide the direction to follow when programing research dealing with the retention/release of pollutants in soils and sorbent materials. [Display omitted] • Recent papers show weak points of publications on pollutants adsorption/desorption. • Increasing works on the use of artificial intelligence in this kind of research. • A protocol is proposed to guide programing research on pollutants retention/release. [ABSTRACT FROM AUTHOR]

Supercritical water oxidation (SCWO) has been regarded as a new and efficient technology for the harmless treatment and energy utilization of organic wastes, resulting in the quickly homogeneous oxidation between organics and oxidizers and the former being wholly degraded into small environment-friendly green molecules such as H 2 O and N 2 and inorganic salts. This paper systematically analyzed the influencing behavior and mechanisms of the reaction factors, such as temperature, pressure, residence time, oxidant type, oxidation coefficient, and the concentration and pH values of the raw material, on the treatment effect of organic wastes. For most organic wastes, the SCWO conditions at 550 °C with a residence time of 1min and an oxidation coefficient of 100% can meet the removal rate of more than 99%. To further enhance the degradation rate of organics, the principles, implementation cases, and related equipment components of general enhancement technologies of supercritical water oxidation were discussed, such as fractional oxygen injection, auxiliary fuel co-oxidation, and hydrothermal flame-assisted degradation. This paper proposes a novel supercritical flame-assisted oxidation process in which the reactor performs preheating, corrosion protection, and desalination functions. The use of additive-enhanced oxidation, segmented oxidation, and supercritical hydrothermal flame-assisted oxidation has achieved good results in the complicated treatment process of brutal degradation of organic matter. Figure Schematics of supercritical water oxidation flowchart and focused process enhancement perspectives. [Display omitted] [ABSTRACT FROM AUTHOR]

A novel multimode colorimetric and fluorescent chemosensor was developed using an 8-hydroxy quinoline carbaldehyde Schiff base with a quinoline hydrazide probe (E)-2-((2-(quinolin-2-yl)hydrazineylidene)methyl)quinolin-8-ol (L). NMR (1H &13C), FTIR, and HR-mass spectral characterization techniques confirmed the probe L structural conformation. As Probe L contacts Pb2+ ions, a color change and turn-off emission can be visually detected in EtOH:H 2 O (1:1, v/v, pH = 7.21) medium. The probe displays a good emission at 440 nm due to the combined ESIPT and ICT process. The Pb2+ ion interacts with the probe and selectively quenches fluorescence by inhibiting ESIPT and >C N- isomerization. As per Job's plot, L-Pb 2+ complex formation occurred in a 1:1 stoichiometric ratio, with association constant (K a) and quenching constant (K sv) estimated at 1.52 × 105 M−1 and 4.12 × 105 M, respectively. The detection limits of Pb2+ by spectrophotometric and spectrofluorometric were 1.99 μM (41 ppb) and 23.4 nM (485 ppt), respectively. Additionally, the test paper kit and RGB tool were used to monitor the color changes of L with Pb2+ and the LOD was found to be 5.99 μM (125 ppb). Its recognition mechanism has been verified by 1H NMR, ESI-mass, and theoretical studies. [Display omitted] • Quinoline-Quinoline based probe (L) was Synthesized and Characterized by NMR, IR, and Mass. • Probe L shows visually detectable color change with Pb2+ via turn-off emission. • The LOD of Pb2+ by spectrophotometric and spectrofluorometric were 41 ppb and 485 ppt, respectively. • Used smartphone RGB tool and test paper kit for real-time Pb2+ ion detection. [ABSTRACT FROM AUTHOR]

Constructed wetlands (CWs) are a pollutant treatment design inspired by natural wetlands and are widely utilized for the removal of common pollutants. The research focus lies in the circulation of manganese (Mn) in the environment to enhance pollutant removal within CWs. This paper provides a comprehensive review of recent advancements in understanding the role and effects of Mn in chemical weapons, based on literature retrieval from 2002 to 2021. Ecological risk assessment and heavy metals within CWs emerge as current areas of research interest. Mn sources within CWs primarily include natural deposition, heavy metal wastewater, and intentional addition. The cycling between Mn(II) and Mn(IV) facilitates enhanced wastewater treatment within CWs. Moreover, employing a Mn matrix proves effective in reducing ammonia nitrogen wastewater, organic pollutants, as well as heavy metals such as Cd and Pb, thereby addressing complex pollution challenges practically. To comprehensively analyze influencing factors on the system's performance, both internal factors (biological species, design parameters, pH levels, etc.) and external factors (seasonal climate variations, precipitation patterns, ultraviolet radiation exposure, etc.) were discussed. Among these factors, microorganisms, pollutants, and temperature are the most important influencing factors, which emphasizes the importance of these factors for wetland operation. Lastly, this paper delves into plant absorption of Mn along with coping strategies employed by plants when faced with Mn poisoning or deficiency scenarios. When utilizing Mn for the regulation of constructed wetlands, it is crucial to consider the tolerance levels of associated plant species. Furthermore, the study predicts future research hotspots encompass high-efficiency catalysis techniques, matrix-filling approaches, and preparation of resource utilization methods involving Mn nanomaterials. [Display omitted] [ABSTRACT FROM AUTHOR]