Search

The present study is an attempt to assess the cytogenotoxic effect of untreated and methyl orange treated with Oedogonium subplagiostomum AP1 on Allium cepa roots. On the fifth day, root growth, root length, mitotic index, mitotic inhibition/depression, and chromosomal abnormalities were measured in root cells of Allium cepa subjected to untreated and treated methyl orange dye solutions. Roots exposed to treated dye solution exhibited maximum root growth, root length and mitotic index, whereas roots exposed to untreated dye solution had the most mitotic inhibition and chromosomal abnormalities. Allium cepa exposed to untreated dye solution revealed chromosomal aberrations such as disoriented and abnormal chromosome grouping, vagrant and laggard chromosomes, chromosomal loss, sticky chain and disturbed metaphase, pulverised and disturbed anaphase, chromosomal displacement in anaphase, abnormal telophase, and chromosomal bridge at telophase, spindle disturbances and binucleate cells. The comet test was used to quantify DNA damage in the root cells of A. cepa subjected to untreated and treated methyl orange solutions in terms of tail DNA (percent) and tail length. The results concluded that A. cepa exposed to methyl orange induced DNA damage whereas meager damage was noted in the treated dye solution. As a result, the research can be used as a biomarker to detect the genotoxic effects of textile dyes on biota.

Mercury (Hg) pollution in water has been a problem for the ecosystem and human health, thus eco-friendly remediation methods are gaining traction around the world. In this study, a bacterial strain designated as RS3 isolated from the Red Sea (Saudi Arabia) has shown tolerance to more than 250 mg/L of Hg2+ on minimum inhibitory studies. The isolate RS3 was identified as Marinomonas sp., (Accession No: OK271312) using 16s rRNA sequencing. Tracing the growth curve for the RS3 showed that maximum growth attained at 72 h and only 10% reduction than the control medium for 50 mg/L HgCl2 supplemented seawater medium, which continued to reduce as 21% to 60 with the increment of HgCl2 from 100 to 350 mg/L. The Hg2+ removal potential of RS3 is observed to be 78% at 50 mg/L HgCl2/72 h, which is significantly altered with the addition of carbon source such as glucose (84.5%) > fructose (79.8%) > control (78%) > citrate (73.4%) > acetate (60.2%) > maltose (54.7%). Box-Behnken design (BBD) well proposed a model with R2 value of 0.8922, which predict a utmost Hg2+ removal of 89.5% by RS2 at favorable conditions (pH-7; NaC 1% and glucose 5%) at 72 h. Mercuric reductase enzyme encoded merA gene expression was found to be high in RS3 isolates cultivated in 100 mg/L of HgCl2 in comparison with other variables. Thus the seawater isolate Marinomonas sp. RS3 expressed a significant tolerance and removal potential towards the Hg2+, which would make it is a noteworthy applicant for effective mercury remediation practices.

Effluents of textile industries caused serious environmental problem throughout the world. In this study, a total of 23 bacterial strains from five bacterial species were isolated from the dye effluent. Of these strains, a unique and novel Enterobacter aerogenes ES014 was utilized for dye decolourization and toxicity analysis. The selected strain could effectively decolourize three selected azo dyes. It showed the capability for decolourizing acid orange (82.3 ± 3.6%), methyl orange (78.2 ± 3.3%), and congo red (81.5 ± 3.2%). The selected bacterial strain significantly decolourized 100 mg/L acid orange at 35 °C, pH 7.5 with 6% sodium chloride concentration. Most of the tested nitrogen and carbon sources effectively enhanced decolourization process. It showed the ability to decolourize acid orange in the culture medium containing 1.5% glucose (100 ± 2.8%) and 0.8% beef extract (100 ± 3.1%). A laboratory-scale batch bioreactor was used to decolourize azo dye at optimized culture conditions. The decolourizing ability improved with 100 mL/h hydraulic retention time. The treated wastewater quality was improved due to sharp depletion of Total Dissolved Solids (TDS), pH, Chemical Oxygen Demand (COD), alkalinity and sulphate concentration. The selected bacteria has the potential to produce dye degrading laccase. Laccase was detected during fermentation process in batch bioreactor as a key enzyme for decolourization produced by E. aerogenes ES014. Phytotoxicity and acute toxicity analysis were performed using Arachis hypogaea (pea nut) seed and first instar larvae of Artemia parthenogenetica (brine shrimp). The seed germination rate of treated wastewater was improved (94.3 ± 1.8%) and enhanced survival rate (91.7 ± 2.9%) in the first instar Artemia larvae treated with wastewater after 24 h. Overall, E. aerogenes ES014, might be a promising bacterial strain for the treatment of textile effluents with high azo dye concentrations.

Microbial fuel cell (MFC) is a green technology and does not harm the environment. It can be used for wastewater treatment, hydrogen production and power generation. There are lot of avenues need to be investigated to increase the efficiency of MFC and in order to make it acceptable publicly. Efficiency of MFC depends on many factors. In this study, the influence of anode materials (Fe, Al and Zn), their sizes (12, 16 and 20 cm

The main aim of the study was to degrade poly-β-hydroxybutyrate (P(3HB)) in the sequencing batch biofilm reactor (SBBR) using biocatalyst. Enrichment method was used for the isolation of P(3HB) degrading bacteria. These bacterial strains were isolated from the wastewater sludge sample treated with P(3HB) sheets. A total of 75 bacteria were isolated after 60 days of incubation. The zone of clearance varied between 12 ± 1 mm and 19 ± 2 mm. Two bacterial strains (Nitrobacter vulgaris SW1 and Pseudomonas aeruginosa KS10) showed rapid PHB degradation activity on agar plates. Plate screening experiments confirmed PHB degrading ability of P. aeruginosa KS10 and N. vulgaris SW1. Biodegrading potential improved after 72 h fermentation period. The bacteria produced depolymerase and enzyme activity was maximum after 72 h. The sequencing batch biofilm reactor (SBBR) co-cultured with N. vulgaris SW1 and P. aeruginosa KS10 was operated to remove PHB from the wastewater. Biofilm in the reactor degraded PHB and the production of polyhydroxybutyrate depolymerase influenced on PHB degradation. Polyhydroxybutyrate degradation improved continuously and maximum degradation (95.6%) was achieved after 8 days. The degradation of biopolymers help to reduce environmental pollution associated with the petroleum based polymers.

Sequencing batch reactor (SBR) is useful in removal of both non-biodegradable and biodegradable contaminants from wastewater. The main aim of the present investigation was to evaluate the potential of biocatalyst strain RA-14 on heavy metal removal under SBR. The selected strain was screened from the soil sediment contaminated with heavy metals. It was able to survive at different (Hg2+, Pb2+, Zn2+, Cu2+, Cd2+ and Ni2+) heavy metals (>500 ppm). The bacterial strain RA-14 showed maximum bioaccumulation potential than other strains. Heavy metal resistance patterns of Pb2+ > Cu2 > Cd2+ > Hg2+, Ni2+ and Zn2 was observed. Strain RA-14 was resistant to penicillin–G, nalidixic acid, ceftazidime, cefotaxime, kanamycin and ampicillin. The results revealed that bioaccumulation activities were improved at pH 7.0 (83.2 ± 1.8%), 40 °C (89.34 ± 3%) and affected at higher pH values and temperature. The results showed that contact time and initial Lead concentration was also affected Lead accumulation. The heavy metal tolerant strain RA-14 was further investigated towards heavy metal removal in SBR. Heavy metal was removed in SBR within 10 h of hydraulic retention time. Heavy metal removal was high at 2 mg/L (0.33 mg/L Cu2+, 0.33 mg/L Hg2+, 0.33 mg/L Pb2+, 0.33 mg/L Zn2+, 0.33 mg/L Cd2+ and 0.33 mg/L Ni2+) heavy metals. Total nitrogen, biological oxygen demand (BOD) and chemical oxygen demand (COD) of treated water in SBR was removed and the removal efficacy was 91.3 ± 2.1%, 97.6 ± 3.3%, and 94.3 ± 4.4%, respectively in 10 h hydraulic retention time. However, the efficiency of BOD, COD and total nitrogen content removal was decreased, due to the reduced metabolic process of bacteria after 10 h. The SBR reactor proved to be an efficient method for the treatment of various heavy metals from the wastewater.