Search

An aerobic microbial fuel cell (MFC) was designed to produce bio-electricity using cow manure-pretreated slurry (CM) and sewage sludge (SS). A comparative study of parametric effects on power generation for various parameters like feed ratio of wastes, pH of anode media, and electrode depth was conducted. This experiment aimed to identify the most important system parameters and optimize them to develop a suitable controller for a stable output. Power production reached its maximum at an electrode depth of 7 cm, a pH of 6, and a feed ratio of 2:1 in the CM + SS system before applying the controller. Response surface methodology (RSM) was practiced to explore the relationships between various parameters and the response using MINITAB software. The regression equation of the most productive system deduced from the RSM result has an R2 value of 85.3%. The results show that an ON/OFF controller works satisfactorily in this study. The highest energy-generating setup has a chemical oxygen demand (COD) removal efficiency of 45%. The morphology and content of the used wastes indicate that they can be recycled in other applications., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Anaerobic bioconversion of methanol was tested in the presence of selenate (SeO 4 2- ), thiosulfate (S 2 O 3 2- ), and sulfate (SO 4 2- ) as electron acceptors. Complete SeO 4 2- reduction occurred at COD:SeO 4 2- ratios of 12 and 30, whereas ~ 83% reduction occurred when the COD:SeO 4 2- ratio was 6. Methane production did not occur at the three COD:SeO 4 2- ratios investigated. Up to 10.1 and 30.9% of S 2 O 3 2- disproportionated to SO 4 2- at COD:S 2 O 3 2- ratios of 1.2 and 2.25, respectively, and > 99% reduction was observed at both ratios. The presence of S 2 O 3 2- lowered the methane production by 73.1% at a COD:S 2 O 3 2- ratio of 1.2 compared to the control (no S 2 O 3 2- ). This study showed that biogas production was not preferable for SeO 4 2- and S 2 O 3 2- -rich effluents and volatile fatty acid production could be a potential resource recovery option.

This study investigated the effect of temperature and methane partial pressure on the anaerobic methane-oxidizing and sulfate-reducing (AOM-SR) activities by a highly enriched ANME-2a community. The ANME-2a-enriched biomass was incubated at different pressures, i.e., 2, 10, 20, and 30 MPa at 15 °C for 80 days. The response of the microbial community with temperature was investigated in incubations at 4, 15, and 25 °C at 10 MPa. Among all tested conditions, the incubation at 10 MPa pressure and 15 °C showed the highest AOM-SR activity of the studied ANME-2a phylotype, whereas activity at 2 MPa pressure and 15 °C was almost comparative to the response at 10 MPa pressure. The finding of the most favorable conditions for AOM-SR activity by the studied AOM-SR community comparable to the in situ pressure and temperature (15 °C at 10 MPa) suggests that the studied ANME-2a phylotype was well adapted to the conditions similar to its origin. The microbial community analysis showed that the bacterial community composition shifted upon changing the incubation temperature and pressure.

Typha latifolia-planted vertical subsurface flow constructed wetlands (VSSF CWs) and an unplanted microcosm constructed wetland were used for treating secondary refinery wastewater from the Kaduna Refining and Petrochemical Company (KRPC, Nigeria). Cow dung was applied to the planted wetlands at the start of the experiment and after 3 months to enhance plant growth and petroleum degradation. The T. latifolia-planted VSSF CWs removed 45-99% total petroleum hydrocarbon (TPH), 99-100% phenol, 70-80% oil and grease, 45-91% chemical oxygen demand (COD), and 46-88% total suspended solids (TSSs). The performance of the unplanted control VSSF CW achieved lower removal efficiencies (15-58% TPH, 86-91% phenol, 16-44% oil and grease, 24-66% COD, and 20-55% TSS). T. latifolia plants had a bioaccumulation factor (BAF) > 1 for phenol, total nitrogen (TN), and total phosphate (TP), suggesting a high removal performance for these contaminants and good translocation ability (TF) for TPH, phenol, oil and grease, and TN, with the exception of TP which was mainly retained in their roots (BAF = 47). This study showed T. latifolia is a good candidate plant to be used in VSSF CWs for polishing secondary refinery wastewater in developing countries.

Industrial wastewaters containing high concentrations of sulphate, such as those generated by mining, metallurgical and mineral processing industries, require electron donor for biological sulfidogenesis. In this study, five types of lignocellulosic biowastes were characterized as potential low-cost slow release electron donors for application in a continuously operated sulphidogenic inverse fluidized bed bioreactor (IFBB). Among them, natural scourer and cork were selected due to their high composition of volatile solids (VS), viz. 89.1 and 96.3%, respectively. Experiments were performed in batch (47 days) and in an IFBB (49 days) using synthetic sulphate-rich wastewater. In batch, the scourer gave higher sulphate reduction rates (67.7 mg SO 4 2-  L -1  day -1 ) in comparison to cork (12.1 mg SO 4 2-  L -1  day -1 ), achieving >82% sulphate reduction efficiencies. In the IFBB packed with the natural scourer, the average sulphate reduction efficiency was 24 (±17)%, while the volumetric sulphate reduction rate was 167 (±117) mg SO 4 2- L -1  day -1 . The long incubation time in the batch experiments (47 days) allowed higher sulphate reduction efficiencies in comparison to the short hydraulic retention time (24 h) in the IFBB. This suggests the hydrolysis-fermentation was the rate-limiting step and the electron donor supply (through hydrolysis of the lignocellulosic biowaste) was limiting the sulphate reduction. Lignocellulose as carrier material and slow release electron donor for sulphidogenesis.